Export limit exceeded: 26045 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26045 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98463 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags schedule_deferred_locked() skips scheduling a deferred action while SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged enqueue flags, which include the flags stashed for a remote activation. move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the destination rq when the moved task was woken up, although no task_woken_scx() follows that activation. An IMMED insert into a busy destination requests a local reenqueue during that enqueue. The request gets linked but not scheduled and stays pending until an unrelated wakeup or preemption on that CPU runs the deferred actions. The IMMED task sits behind the running task in the meantime. If nothing runs them before the scheduler is disabled, the request outlives the scheduler and points into its freed per-cpu area, which the next scheduler dereferences from run_deferred(). Test the core enqueue flags for the wakeup bit. Only the core's wakeup path is followed by task_woken_scx(). | ||||
| CVE-2026-98468 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix spurious warning for benign stage 2 teardown race kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB of RAM, all of which was then exited. Under memory pressure in the L0 host warnings were observed due to migration triggered by compaction: WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80, CPU#5: kcompactd0/66 Which was, in turn, triggered by an MMU notifier for the host invalidation: mmu_notifier_invalidate_range_start() -> ... -> kvm_mmu_notifier_invalidate_range_start() -> kvm_mmu_unmap_gfn_range() -> kvm_unmap_gfn_range() -> kvm_nested_s2_unmap() -> kvm_stage2_unmap_range() -> __unmap_stage2_range() -> stage2_apply_range() <- -EINVAL, triggering a WARN_ON() Racing with L0's teardown of stage 2 page tables: exit_mm() -> mmput() -> __mmput() -> exit_mmap() -> mmu_notifier_release() -> ... -> kvm_mmu_notifier_release() -> kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() -> kvm_free_stage2_pgd() -> [ acquire kvm->mmu_lock for write ] -> mmu->pgt = NULL [ among other tasks ] -> [ release kvm->mmu_lock for write ] It turns out there is a benign race resulting in a spurious warning: Thread A - notify: migration | Thread B - notify: release -------------------------------|--------------------------------- < kvm->mmu_lock held > | stage2_apply_range() | get mmu->pgt, check !NULL | ... | kvm_arch_flush_shadow_all() cond_resched_rwlock_write(); | < contend, sleep kvm->mmu_lock > < drop kvm->mmu_lock > | < acquire kvm->mmu_lock> | ... | kvm_free_stage2_pgd() | mmu->pgt = NULL | < invalidate MMU > | ... | < release kvm->mmu_lock > [ scheduled ] | stage2_apply_range() | < loop to next > | get, mmu->pgt, check !NULL | is NULL, return -EINVAL | __unmap_stage2_range() | WARN_ON(-EINVAL) <--- entirely spurious - the race was handled correctly. Fix the spurious warning by updating stage2_apply_range() to no longer treat concurrent PGT teardown on lock release as an error - whether the walker is tearing down page tables or doing something else this is a legitimate reason to abort the operation without error. This keeps the warning in place for all other circumstances. In practice only __unmap_stage2_range() actually does anything with the error so this only impacts that. | ||||
| CVE-2026-98503 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: packet: use ubuf_info completion for TX_RING packets tpacket_snd sends skbs with frags pointing into its ring slots. Slots are released when skb->destructor is called. A call to skb_orphan calls skb->destructor before the skb is freed. This can cause the slot to be reused while still linked into the skb. Switch to standard zerocopy completion (ubuf_info) so the slot is only released once all references to the payload are freed or copied. Restore skb->destructor to standard sock_wfree. The ubuf_info completion callback can be called with a NULL skb, but only from net_zcopy_put and related API, used by zerocopy implementations that hold their own reference on the uarg, such as MSG_ZEROCOPY. This uarg is only ever completed from skb_zcopy_clear, so skb is always set. To prevent userspace from aliasing in-flight state on shared ring slots, allocate tpacket_uarg per packet, rather than per slot. This adds a small allocation to the transmit path. Use standard kmalloc to allow backporting to stable kernels. The uarg holds an sk_wmem_alloc reference, rather than an sk_refcnt reference. packet_free_tx_ring waits on sk_wmem_alloc before freeing the ring pages. Always allocate vec->deferred for tx_ring so page-backed rings also wait on sk_wmem_alloc when skb_copy_ubufs drops page refs before calling tpacket_ubuf_complete. Drop the tx_ring.pg_vec test that tpacket_destruct_skb performed before accessing the slot. The sk_wmem_alloc reference now guarantees that the slot is valid. The test is also not sufficient by itself, as it reads pg_vec without pg_vec_lock, so it can race with packet_set_ring. As a result a slot is released when its payload is copied, which can be before transmission (e.g., in skb_orphan_frags_rx). If copied before skb_tx_timestamp() is called, no slot timestamp is recorded, similar to when skb_orphan() was called early in the datapath before this patch. Revert the now unused previous skb_zcopy_.._nouarg infra. Depends on commit 992cc9f94ca9 ("net/packet: defer vmalloc TX_RING free until skbs finish"). | ||||
| CVE-2026-98514 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix gem reference leak in validate_init() On the ttm_bo_reserve() failure and "vma not found" error paths, the loop breaks without adding the looked-up object to any validate list, so the reference taken by drm_gem_object_lookup() is never released; validate_fini() only walks the spliced lists. Drop the reference before breaking out on both paths. | ||||
| CVE-2026-98524 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: ib: Clear the sg list when mapping an MR fails rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA mapping and registration can fail. On failure, __rds_rdma_map() unpins the pages and frees the scatterlist, but rds_ib_free_frmr() can still return the MR to the pool with the stale pointer set. This leaves the pool with a dangling scatterlist and can lead to local privilege escalation. KASAN detects the resulting use-after-free when the MR is later torn down: BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr Read of size 8 Call Trace: __rds_ib_teardown_mr rds_ib_unreg_frmr rds_ib_flush_mr_pool rds_ib_flush_mrs rds_free_mr rds_setsockopt Store the scatterlist in the MR only after DMA mapping succeeds. If DMA mapping fails, return directly while the MR fields remain clear; the caller keeps ownership of the scatterlist and its pinned pages. If a later registration step fails, unmap the scatterlist and clear the MR fields before returning. | ||||
| CVE-2026-98525 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mctp: route: iterate socket tag list in mctp_lookup_prealloc_tag() When a socket transmits a packet with MCTP_TAG_PREALLOC set, mctp_lookup_prealloc_tag() iterates over the per-netns &mns->keys list and matches netid, req_tag, peer_addr, and manual_alloc, without checking whether tmp->sk == &msk->sk. This allows any MCTP socket in the same network namespace to use and consume another socket's preallocated tag. Iterate the socket's own tag list (&msk->keys via sklist) instead of the namespace-wide &mns->keys list in mctp_lookup_prealloc_tag(), ensuring that only tags allocated by msk are matched. Tested in QEMU against Linux 7.3.0-rc3 by allocating a manual tag (0x18) on socket A via SIOCMCTPALLOCTAG for peer EID 9 and sending a 4-byte message with MCTP_TAG_PREALLOC from socket B in the same network namespace. On the unfixed kernel, sendto(sock_b) using socket A's preallocated tag succeeds (ret = 4); with this patch applied, sendto(sock_b) fails with -ENOENT (errno = 2) while sendto(sock_a) succeeds (ret = 4). | ||||
| CVE-2026-98526 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: llc: reserve device headroom for allocated frames llc_alloc_frame() reserves link-layer headroom using the device type. This is insufficient for stacked Ethernet devices such as VLAN devices, where vlan_dev_hard_header() pushes a VLAN header before the lower device's Ethernet header. An LLC response on such a device can therefore underflow skb headroom in eth_header(). Use LL_RESERVED_SPACE() to account for the device's actual required headroom while preserving the existing LLC device-type check. | ||||
| CVE-2026-98528 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: fix kernel stack leak to user-space in error path If we fail to acquire the GPIO chip guard in gpio_desc_to_lineinfo(), we return immediately before zeroing the info struct we'll end up passing to the user-space later in lineinfo_get_v1(). This may leak the kernel stack contents. Make gpio_desc_to_lineinfo() return int so that the -ENODEV returned on failure to acquire the guard can be propagated to the callers. While not strictly necessary: move the memset() before trying to acquire the SRCU read lock too for good measure. | ||||
| CVE-2026-98439 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: cancel async requests when closing connection An async request may still be waiting when a connection is closed. This can stop the connection from closing. Cancel active async requests before waiting for them to finish. | ||||
| CVE-2026-98446 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't let hidden_space go negative in xfs_metafile_resv_init LOLLM points out that if the amount of fdblocks that we can reserve for a metadata btree file goes below the space already used by that file, then the hidden_space subtraction can underflow, causing xfs_dec_fdblocks to subtract a huge amount of space. We never want the target to be less than the used sapce, so fix the logic that adjusts dblocks_avail downwards. Also fix an error in the adjacent comment. | ||||
| CVE-2026-98529 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: gpio: arizona: Fix runtime PM leak in arizona_gpio_direction_out() Switching a persistent GPIO line from input to output acquires a runtime PM reference on the parent device, but if the subsequent regmap_update_bits() fails the reference is never dropped and no later direction_in() can balance it since the direction was never changed. Drop the reference on the update failure path. | ||||
| CVE-2026-98530 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix permanent hang when flushing the kprobe optimizer Writing 0 to /proc/sys/debug/kprobes-optimization while a kprobe is jump-optimized never returns. The writer sleeps in D state forever with kprobe_sysctl_mutex held, so any later read or write of that sysctl hangs as well. For example, with vfs_read+9 as an optimizable address in this build: # cd /sys/kernel/tracing # echo 'p:myprobe vfs_read+9' >> kprobe_events # echo 1 > events/kprobes/myprobe/enable # # wait until /sys/kernel/debug/kprobes/list shows [OPTIMIZED] # echo 0 > /proc/sys/debug/kprobes-optimization INFO: task sh:246 blocked for more than 10 seconds. Call Trace: <TASK> __schedule+0x1176/0x4f70 schedule+0xdc/0x2c0 schedule_timeout+0x17b/0x260 wait_for_completion+0x173/0x3c0 wait_for_kprobe_optimizer_locked+0xbc/0x130 proc_kprobes_optimization_handler+0x156/0x1b0 proc_sys_call_handler+0x324/0x490 vfs_write+0x52d/0xfe0 ksys_write+0xff/0x200 do_syscall_64+0x106/0x630 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ... INFO: task cat:265 is blocked on a mutex likely owned by task sh:246. wait_for_kprobe_optimizer_locked() reinitializes optimizer_completion, asks the optimizer thread to flush and sleeps in wait_for_completion(). The thread drains the (un)optimizing lists, but calls complete() only if completion_done() is true, i.e. if the completion is already done, which never happens while someone waits. disarm_all_kprobes() and kprobe_trace_self_tests_init() wait the same way. Calling complete() unconditionally would not be enough: the waiter drops kprobe_mutex while it sleeps, and nothing else serializes the sysctl handler against the debugfs "enabled" file. A second flusher that still finds the lists non-empty, e.g. because a disabled probe is queued for unoptimizing, reinitializes the completion under the first: sysctl write debugfs "enabled" write unoptimize_all_kprobes() wait_for_kprobe_optimizer_locked() init_completion(c) mutex_unlock(&kprobe_mutex) wait_for_completion(c) disarm_all_kprobes() wait_for_kprobe_optimizer_locked() init_completion(c) // c->wait is reset, the first // waiter is off the queue mutex_unlock(&kprobe_mutex) wait_for_completion(c) kprobe_optimizer() complete(c) // wakes the debugfs writer only where c is &optimizer_completion. Lining up the two writes during an optimizer pass loses the sysctl writer this way. Replace the completion with a counter of optimizer passes, bumped at the end of each pass and signalled with wake_up_var_locked(), both under kprobe_mutex. A flusher samples the count and waits with wait_var_event_mutex(), which drops kprobe_mutex only while sleeping, so a new count means a whole pass ran in the meantime. Nothing is reinitialized, so several flushers can sleep in the wait at once. | ||||
| CVE-2026-98531 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST In seg6_genl_policy, SEG6_ATTR_DST is defined with .type = NLA_BINARY and .len = sizeof(struct in6_addr). For NLA_BINARY, .len only enforces the maximum payload length and permits shorter payloads (e.g., 0 bytes). When seg6_genl_set_tunsrc() copies sizeof(struct in6_addr) bytes via kmemdup(val, sizeof(*val), GFP_KERNEL), a short SEG6_ATTR_DST attribute triggers a 16-byte out-of-bounds read past skb->tail into uninitialized skb->head memory, which is stored in sdata->tun_src and leaked back to userspace via SEG6_CMD_GET_TUNSRC. Switch SEG6_ATTR_DST in seg6_genl_policy to NLA_POLICY_EXACT_LEN(sizeof(struct in6_addr)) so that generic netlink validation rejects any attribute whose length is not exactly sizeof(struct in6_addr) with -ERANGE. Tested in QEMU against Linux 7.3.0-rc3 by sending a SEG6_CMD_SET_TUNSRC Generic Netlink message with a 0-byte SEG6_ATTR_DST attribute followed by SEG6_CMD_GET_TUNSRC. On the unfixed kernel, SEG6_CMD_SET_TUNSRC succeeds (err = 0) and SEG6_CMD_GET_TUNSRC leaks 16 bytes of uninitialized kernel heap memory (tun_src = 836a61ecc4d25a1042a8d60411cfb378); with this patch applied, SEG6_CMD_SET_TUNSRC is rejected by netlink policy validation with -ERANGE (-34) and tun_src remains zeroed. | ||||
| CVE-2026-98534 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipe: fix use-after-free when auditing a newly loaded policy new_policy() audits the policy after ipe_new_policyfs_node() publishes it and drops the new directory's inode lock. A concurrent delete can free the policy while ipe_audit_policy_load() is still using it. Audit the successful load under that lock. [FW: remove model name according to latest guideline] | ||||
| CVE-2026-98452 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clean up failed cached directory opens open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If the CREATE succeeds but a later command returns an error, the function must retain the CREATE FID so common cleanup can issue SMB2_close(). It also must not treat a response error as a valid CREATE. Validate the CREATE response before using its fields, record the FIDs, and mark the handle open before handling errors from later compound commands. Move the -EREMCHG reconnect handling before response validation so a missing response does not hide the reconnect request. Count the handle when it is marked open; confirmed close responses decrement the counter, while existing close retry behavior remains best effort on transport failures. | ||||
| CVE-2026-98458 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the ISO layer. A new channel association consumes that hold, which is eventually released by iso_conn_free(). There are two cases where iso_chan_add() does not create an association: it returns success when the socket is already attached to the same iso_conn, and it returns -EBUSY when another socket is attached. The hold returned for the current call is unused in both cases. This occurs when deferred setup calls iso_connect_cis() again for its existing socket, or when another socket attempts to reuse the CIS. Detect the idempotent case while the connection is locked and release the unused hold after iso_chan_add(). Also release it on -EBUSY. Do not drop it for other errors: a newly allocated iso_conn releases the transferred hold when its last temporary reference is put. | ||||
| CVE-2026-98466 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Transfer the hyp stack pages out of the host stage-2 fix_host_ownership() walks only the linear-map alias of each memblock region, and the per-CPU hyp stack, mapped in the private VA range for its guard page, has none. Walk each stack's VA range with the same walker. | ||||
| CVE-2026-98683 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: flush dirty data before zeroing a range smb3_zero_range() emulates FALLOC_FL_ZERO_RANGE by invalidating the page cache over the target range with truncate_pagecache_range() and then issuing FSCTL_SET_ZERO_DATA to the server. Dirty data was only flushed conditionally, when the range reached or extended EOF. For a purely interior zero range that does not reach EOF, no flush happened, so a dirty folio overlapping the range could be written back to the server after the FSCTL and refill the range that was just zeroed with stale data. Fix this by unconditionally flushing and waiting for dirty data in the range before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA, exactly as was done for smb3_punch_hole() in commit d7d2adcd022b ("smb/client: flush dirty data before punching a hole"); the two paths are structurally identical here. This is observed as generic/363 randomly reading stale data where a zeroed range is expected against Windows Server. | ||||
| CVE-2026-98509 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix memory leak of fence event on execbuffer failure virtio_gpu_execbuffer_ioctl() reserves a DRM event with drm_event_reserve_init() when VIRTGPU_EXECBUF_RING_IDX selects a ring that userspace has enabled polling for. virtio_gpu_init_submit() does this before the BO handles, the command buffer, the syncobj arrays and the in-fence are processed, so every later error path runs with the event already pending, including plain argument validation failures such as an invalid bo_handle or an in-syncobj that carries no fence. On those paths, virtio_gpu_cleanup_submit() drops the out-fence without cancelling the event. The fence is freed without ever having been emitted, taking the only driver-side pointer to the event with it. Closing the DRM file does not help. drm_events_release() unlinks pending events but deliberately leaves the freeing to the driver's later drm_send_event(), which never runs for an orphaned event, so the allocation is leaked permanently. Found when fuzzing the virtio driver with Syzkaller: BUG: memory leak unreferenced object 0xffff88802c176e80 (size 96): comm "syz.1.367", pid 10561, jiffies 4294960122 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c8 6e 17 2c 80 88 ff ff 00 00 00 00 00 00 00 00 .n.,............ backtrace (crc e1973c6b): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4597 [inline] slab_alloc_node mm/slub.c:4917 [inline] __kmalloc_cache_noprof+0x49d/0x6f0 mm/slub.c:5485 _kmalloc_noprof include/linux/slab.h:988 [inline] _kzalloc_noprof include/linux/slab.h:1309 [inline] virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:282 [inline] virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] virtio_gpu_execbuffer_ioctl+0xbbf/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix by cancelling and freeing the DRM event on the execbuffer error path before dropping the fence. Clear the fence's event pointer after cancellation so it does not retain a dangling pointer. | ||||
| CVE-2026-72045 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct index into the LMT map table to read another function's LMTLINE physical base address and copy it into the caller's own LMT map table entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the IRQ source, but req->base_pcifunc is a separate payload field and is not sanitized. Reject the request with -EPERM when a VF caller's base_pcifunc is not a valid function under its own PF. is_pf_func_valid() bounds the FUNC field to the PF's configured VF count, keeping the computed index inside the caller's own slot block. | ||||