Export limit exceeded: 26155 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26155 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53992 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: ocb: don't leave if not joined If there's no OCB state, don't ask the driver/mac80211 to leave, since that's just confusing. Since set/clear the chandef state, that's a simple check. | ||||
| CVE-2023-54231 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix memory leak in wx_setup_rx_resources When wx_alloc_page_pool() failed in wx_setup_rx_resources(), it doesn't release DMA buffer. Add dma_free_coherent() in the error path to release the DMA buffer. | ||||
| CVE-2023-54273 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix leak of dev tracker At the stage of direction checks, the netdev reference tracker is already initialized, but released with wrong *_put() call. | ||||
| CVE-2023-54249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Only send -ENOTCONN status if client driver is available For the STOP and RESET commands, only send the channel disconnect status -ENOTCONN if client driver is available. Otherwise, it will result in null pointer dereference. | ||||
| CVE-2023-53991 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Disallow unallocated resources to be returned In the event that the topology requests resources that have not been created by the system (because they are typically not represented in dpu_mdss_cfg ^1), the resource(s) in global_state (in this case DSC blocks, until their allocation/assignment is being sanity-checked in "drm/msm/dpu: Reject topologies for which no DSC blocks are available") remain NULL but will still be returned out of dpu_rm_get_assigned_resources, where the caller expects to get an array containing num_blks valid pointers (but instead gets these NULLs). To prevent this from happening, where null-pointer dereferences typically result in a hard-to-debug platform lockup, num_blks shouldn't increase past NULL blocks and will print an error and break instead. After all, max_blks represents the static size of the maximum number of blocks whereas the actual amount varies per platform. ^1: which can happen after a git rebase ended up moving additions to _dpu_cfg to a different struct which has the same patch context. Patchwork: https://patchwork.freedesktop.org/patch/517636/ | ||||
| CVE-2023-54239 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Check for uptr overflow syzkaller found that setting up a map with a user VA that wraps past zero can trigger WARN_ONs, particularly from pin_user_pages weirdly returning 0 due to invalid arguments. Prevent creating a pages with a uptr and size that would math overflow. WARNING: CPU: 0 PID: 518 at drivers/iommu/iommufd/pages.c:793 pfn_reader_user_pin+0x2e6/0x390 Modules linked in: CPU: 0 PID: 518 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:pfn_reader_user_pin+0x2e6/0x390 Code: b1 11 e9 25 fe ff ff e8 28 e4 0f ff 31 ff 48 89 de e8 2e e6 0f ff 48 85 db 74 0a e8 14 e4 0f ff e9 4d ff ff ff e8 0a e4 0f ff <0f> 0b bb f2 ff ff ff e9 3c ff ff ff e8 f9 e3 0f ff ba 01 00 00 00 RSP: 0018:ffffc90000f9fa30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff821e2b72 RDX: 0000000000000000 RSI: ffff888014184680 RDI: 0000000000000002 RBP: ffffc90000f9fa78 R08: 00000000000000ff R09: 0000000079de6f4e R10: ffffc90000f9f790 R11: ffff888014185418 R12: ffffc90000f9fc60 R13: 0000000000000002 R14: ffff888007879800 R15: 0000000000000000 FS: 00007f4227555740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 000000000e748005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> pfn_reader_next+0x14a/0x7b0 ? interval_tree_double_span_iter_update+0x11a/0x140 pfn_reader_first+0x140/0x1b0 iopt_pages_rw_slow+0x71/0x280 ? __this_cpu_preempt_check+0x20/0x30 iopt_pages_rw_access+0x2b2/0x5b0 iommufd_access_rw+0x19f/0x2f0 iommufd_test+0xd11/0x16f0 ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc | ||||
| CVE-2023-54241 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: KVM: Fix NULL pointer dereference After commit 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") we get a NULL pointer dereference when creating a KVM guest: [ 146.243409] Starting KVM with MIPS VZ extensions [ 149.849151] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000300, epc == ffffffffc06356ec, ra == ffffffffc063568c [ 149.849177] Oops[#1]: [ 149.849182] CPU: 3 PID: 2265 Comm: qemu-system-mip Not tainted 6.4.0-rc3+ #1671 [ 149.849188] Hardware name: THTF CX TL630 Series/THTF-LS3A4000-7A1000-ML4A, BIOS KL4.1F.TF.D.166.201225.R 12/25/2020 [ 149.849192] $ 0 : 0000000000000000 000000007400cce0 0000000000400004 ffffffff8119c740 [ 149.849209] $ 4 : 000000007400cce1 000000007400cce1 0000000000000000 0000000000000000 [ 149.849221] $ 8 : 000000240058bb36 ffffffff81421ac0 0000000000000000 0000000000400dc0 [ 149.849233] $12 : 9800000102a07cc8 ffffffff80e40e38 0000000000000001 0000000000400dc0 [ 149.849245] $16 : 0000000000000000 9800000106cd0000 9800000106cd0000 9800000100cce000 [ 149.849257] $20 : ffffffffc0632b28 ffffffffc05b31b0 9800000100ccca00 0000000000400000 [ 149.849269] $24 : 9800000106cd09ce ffffffff802f69d0 [ 149.849281] $28 : 9800000102a04000 9800000102a07cd0 98000001106a8000 ffffffffc063568c [ 149.849293] Hi : 00000335b2111e66 [ 149.849295] Lo : 6668d90061ae0ae9 [ 149.849298] epc : ffffffffc06356ec kvm_vz_vcpu_setup+0xc4/0x328 [kvm] [ 149.849324] ra : ffffffffc063568c kvm_vz_vcpu_setup+0x64/0x328 [kvm] [ 149.849336] Status: 7400cce3 KX SX UX KERNEL EXL IE [ 149.849351] Cause : 1000000c (ExcCode 03) [ 149.849354] BadVA : 0000000000000300 [ 149.849357] PrId : 0014c004 (ICT Loongson-3) [ 149.849360] Modules linked in: kvm nfnetlink_queue nfnetlink_log nfnetlink fuse sha256_generic libsha256 cfg80211 rfkill binfmt_misc vfat fat snd_hda_codec_hdmi input_leds led_class snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_pcm snd_timer snd serio_raw xhci_pci radeon drm_suballoc_helper drm_display_helper xhci_hcd ip_tables x_tables [ 149.849432] Process qemu-system-mip (pid: 2265, threadinfo=00000000ae2982d2, task=0000000038e09ad4, tls=000000ffeba16030) [ 149.849439] Stack : 9800000000000003 9800000100ccca00 9800000100ccc000 ffffffffc062cef4 [ 149.849453] 9800000102a07d18 c89b63a7ab338e00 0000000000000000 ffffffff811a0000 [ 149.849465] 0000000000000000 9800000106cd0000 ffffffff80e59938 98000001106a8920 [ 149.849476] ffffffff80e57f30 ffffffffc062854c ffffffff811a0000 9800000102bf4240 [ 149.849488] ffffffffc05b0000 ffffffff80e3a798 000000ff78000000 000000ff78000010 [ 149.849500] 0000000000000255 98000001021f7de0 98000001023f0078 ffffffff81434000 [ 149.849511] 0000000000000000 0000000000000000 9800000102ae0000 980000025e92ae28 [ 149.849523] 0000000000000000 c89b63a7ab338e00 0000000000000001 ffffffff8119dce0 [ 149.849535] 000000ff78000010 ffffffff804f3d3c 9800000102a07eb0 0000000000000255 [ 149.849546] 0000000000000000 ffffffff8049460c 000000ff78000010 0000000000000255 [ 149.849558] ... [ 149.849565] Call Trace: [ 149.849567] [<ffffffffc06356ec>] kvm_vz_vcpu_setup+0xc4/0x328 [kvm] [ 149.849586] [<ffffffffc062cef4>] kvm_arch_vcpu_create+0x184/0x228 [kvm] [ 149.849605] [<ffffffffc062854c>] kvm_vm_ioctl+0x64c/0xf28 [kvm] [ 149.849623] [<ffffffff805209c0>] sys_ioctl+0xc8/0x118 [ 149.849631] [<ffffffff80219eb0>] syscall_common+0x34/0x58 The root cause is the deletion of kvm_mips_commpage_init() leaves vcpu ->arch.cop0 NULL. So fix it by making cop0 from a pointer to an embedded object. | ||||
| CVE-2023-54242 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: Fix division by zero error on zero wsum When the weighted sum is zero the calculation of limit causes a division by zero error. Fix this by continuing to the next level. This was discovered by running as root: stress-ng --ioprio 0 Fixes divison by error oops: [ 521.450556] divide error: 0000 [#1] SMP NOPTI [ 521.450766] CPU: 2 PID: 2684464 Comm: stress-ng-iopri Not tainted 6.2.1-1280.native #1 [ 521.451117] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 521.451627] RIP: 0010:bfqq_request_over_limit+0x207/0x400 [ 521.451875] Code: 01 48 8d 0c c8 74 0b 48 8b 82 98 00 00 00 48 8d 0c c8 8b 85 34 ff ff ff 48 89 ca 41 0f af 41 50 48 d1 ea 48 98 48 01 d0 31 d2 <48> f7 f1 41 39 41 48 89 85 34 ff ff ff 0f 8c 7b 01 00 00 49 8b 44 [ 521.452699] RSP: 0018:ffffb1af84eb3948 EFLAGS: 00010046 [ 521.452938] RAX: 000000000000003c RBX: 0000000000000000 RCX: 0000000000000000 [ 521.453262] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb1af84eb3978 [ 521.453584] RBP: ffffb1af84eb3a30 R08: 0000000000000001 R09: ffff8f88ab8a4ba0 [ 521.453905] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8f88ab8a4b18 [ 521.454224] R13: ffff8f8699093000 R14: 0000000000000001 R15: ffffb1af84eb3970 [ 521.454549] FS: 00005640b6b0b580(0000) GS:ffff8f88b3880000(0000) knlGS:0000000000000000 [ 521.454912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 521.455170] CR2: 00007ffcbcae4e38 CR3: 00000002e46de001 CR4: 0000000000770ee0 [ 521.455491] PKRU: 55555554 [ 521.455619] Call Trace: [ 521.455736] <TASK> [ 521.455837] ? bfq_request_merge+0x3a/0xc0 [ 521.456027] ? elv_merge+0x115/0x140 [ 521.456191] bfq_limit_depth+0xc8/0x240 [ 521.456366] __blk_mq_alloc_requests+0x21a/0x2c0 [ 521.456577] blk_mq_submit_bio+0x23c/0x6c0 [ 521.456766] __submit_bio+0xb8/0x140 [ 521.457236] submit_bio_noacct_nocheck+0x212/0x300 [ 521.457748] submit_bio_noacct+0x1a6/0x580 [ 521.458220] submit_bio+0x43/0x80 [ 521.458660] ext4_io_submit+0x23/0x80 [ 521.459116] ext4_do_writepages+0x40a/0xd00 [ 521.459596] ext4_writepages+0x65/0x100 [ 521.460050] do_writepages+0xb7/0x1c0 [ 521.460492] __filemap_fdatawrite_range+0xa6/0x100 [ 521.460979] file_write_and_wait_range+0xbf/0x140 [ 521.461452] ext4_sync_file+0x105/0x340 [ 521.461882] __x64_sys_fsync+0x67/0x100 [ 521.462305] ? syscall_exit_to_user_mode+0x2c/0x1c0 [ 521.462768] do_syscall_64+0x3b/0xc0 [ 521.463165] entry_SYSCALL_64_after_hwframe+0x5a/0xc4 [ 521.463621] RIP: 0033:0x5640b6c56590 [ 521.464006] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 80 3d 71 70 0e 00 00 74 17 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c | ||||
| CVE-2023-54244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: Fix oops when removing custom query handlers When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi | ||||
| CVE-2023-53987 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ping: Fix potentail NULL deref for /proc/net/icmp. After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. | ||||
| CVE-2023-54245 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds When we run syzkaller we get below Out of Bound. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: dump_backtrace+0x0/0x4c8 show_stack+0x34/0x44 dump_stack_lvl+0xd8/0x118 print_address_description+0x30/0x2d8 kasan_report+0x158/0x198 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf4/0x180 _regmap_read+0xc4/0x278 _regmap_update_bits+0x130/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_digital_mute+0xec/0x140 Actually There is no need to have decimator with 32 bits. By limiting the variable with short type u8 issue is resolved. | ||||
| CVE-2023-54246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle() The rcuscale.holdoff module parameter can be used to delay the start of rcu_scale_writer() kthread. However, the hung-task timeout will trigger when the timeout specified by rcuscale.holdoff is greater than hung_task_timeout_secs: runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M" bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300" [ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds. [ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7 [ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000 [ 247.075346] Call Trace: [ 247.075660] <TASK> [ 247.075965] __schedule+0x635/0x1280 [ 247.076448] ? __pfx___schedule+0x10/0x10 [ 247.076967] ? schedule_timeout+0x2dc/0x4d0 [ 247.077471] ? __pfx_lock_release+0x10/0x10 [ 247.078018] ? enqueue_timer+0xe2/0x220 [ 247.078522] schedule+0x84/0x120 [ 247.078957] schedule_timeout+0x2e1/0x4d0 [ 247.079447] ? __pfx_schedule_timeout+0x10/0x10 [ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.080591] ? __pfx_process_timeout+0x10/0x10 [ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10 [ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.082287] rcu_scale_writer+0x6b1/0x7f0 [ 247.082773] ? mark_held_locks+0x29/0xa0 [ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.084412] kthread+0x179/0x1c0 [ 247.084759] ? __pfx_kthread+0x10/0x10 [ 247.085098] ret_from_fork+0x2c/0x50 [ 247.085433] </TASK> This commit therefore replaces schedule_timeout_uninterruptible() with schedule_timeout_idle(). | ||||
| CVE-2023-54247 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Silence a warning in btf_type_id_size() syzbot reported a warning in [1] with the following stacktrace: WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... Call Trace: <TASK> map_check_btf kernel/bpf/syscall.c:1024 [inline] map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198 __sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040 __do_sys_bpf kernel/bpf/syscall.c:5162 [inline] __se_sys_bpf kernel/bpf/syscall.c:5160 [inline] __x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With the following btf [1] DECL_TAG 'a' type_id=4 component_idx=-1 [2] PTR '(anon)' type_id=0 [3] TYPE_TAG 'a' type_id=2 [4] VAR 'a' type_id=3, linkage=static and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG), the following WARN_ON_ONCE in btf_type_id_size() is triggered: if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) && !btf_type_is_var(size_type))) return NULL; Note that 'return NULL' is the correct behavior as we don't want a DECL_TAG type to be used as a btf_{key,value}_type_id even for the case like 'DECL_TAG -> STRUCT'. So there is no correctness issue here, we just want to silence warning. To silence the warning, I added DECL_TAG as one of kinds in btf_type_nosize() which will cause btf_type_id_size() returning NULL earlier without the warning. [1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ | ||||
| CVE-2023-53865 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix warning when putting transaction with qgroups enabled after abort If we have a transaction abort with qgroups enabled we get a warning triggered when doing the final put on the transaction, like this: [552.6789] ------------[ cut here ]------------ [552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs] [552.6817] Modules linked in: btrfs blake2b_generic xor (...) [552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs] [552.6821] Code: bd a0 01 00 (...) [552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286 [552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000 [552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010 [552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20 [552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70 [552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028 [552.6821] FS: 0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000 [552.6821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0 [552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [552.6822] Call Trace: [552.6822] <TASK> [552.6822] ? __warn+0x80/0x130 [552.6822] ? btrfs_put_transaction+0x123/0x130 [btrfs] [552.6824] ? report_bug+0x1f4/0x200 [552.6824] ? handle_bug+0x42/0x70 [552.6824] ? exc_invalid_op+0x14/0x70 [552.6824] ? asm_exc_invalid_op+0x16/0x20 [552.6824] ? btrfs_put_transaction+0x123/0x130 [btrfs] [552.6826] btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs] [552.6828] ? _raw_spin_unlock_irqrestore+0x23/0x40 [552.6828] ? try_to_wake_up+0x94/0x5e0 [552.6828] ? __pfx_process_timeout+0x10/0x10 [552.6828] transaction_kthread+0x103/0x1d0 [btrfs] [552.6830] ? __pfx_transaction_kthread+0x10/0x10 [btrfs] [552.6832] kthread+0xee/0x120 [552.6832] ? __pfx_kthread+0x10/0x10 [552.6832] ret_from_fork+0x29/0x50 [552.6832] </TASK> [552.6832] ---[ end trace 0000000000000000 ]--- This corresponds to this line of code: void btrfs_put_transaction(struct btrfs_transaction *transaction) { (...) WARN_ON(!RB_EMPTY_ROOT( &transaction->delayed_refs.dirty_extent_root)); (...) } The warning happens because btrfs_qgroup_destroy_extent_records(), called in the transaction abort path, we free all entries from the rbtree "dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we don't actually empty the rbtree - it's still pointing to nodes that were freed. So set the rbtree's root node to NULL to avoid this warning (assign RB_ROOT). | ||||
| CVE-2023-53864 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable() When disabling overlay plane in mxsfb_plane_overlay_atomic_update(), overlay plane's framebuffer pointer is NULL. So, dereferencing it would cause a kernel Oops(NULL pointer dereferencing). Fix the issue by disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead. | ||||
| CVE-2023-54248 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add check for kmemdup Since the kmemdup may return NULL pointer, it should be better to add check for the return value in order to avoid NULL pointer dereference. | ||||
| CVE-2023-53859 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/idle: mark arch_cpu_idle() noinstr linux-next commit ("cpuidle: tracing: Warn about !rcu_is_watching()") adds a new warning which hits on s390's arch_cpu_idle() function: RCU not on for: arch_cpu_idle+0x0/0x28 WARNING: CPU: 2 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x24c/0x258 Modules linked in: CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.2.0-rc6-next-20230202 #4 Hardware name: IBM 8561 T01 703 (z/VM 7.3.0) Krnl PSW : 0404d00180000000 00000000002b55c0 (arch_ftrace_ops_list_func+0x250/0x258) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: c0000000ffffbfff 0000000080000002 0000000000000026 0000000000000000 0000037ffffe3a28 0000037ffffe3a20 0000000000000000 0000000000000000 0000000000000000 0000000000f4acf6 00000000001044f0 0000037ffffe3cb0 0000000000000000 0000000000000000 00000000002b55bc 0000037ffffe3bb8 Krnl Code: 00000000002b55b0: c02000840051 larl %r2,0000000001335652 00000000002b55b6: c0e5fff512d1 brasl %r14,0000000000157b58 #00000000002b55bc: af000000 mc 0,0 >00000000002b55c0: a7f4ffe7 brc 15,00000000002b558e 00000000002b55c4: 0707 bcr 0,%r7 00000000002b55c6: 0707 bcr 0,%r7 00000000002b55c8: eb6ff0480024 stmg %r6,%r15,72(%r15) 00000000002b55ce: b90400ef lgr %r14,%r15 Call Trace: [<00000000002b55c0>] arch_ftrace_ops_list_func+0x250/0x258 ([<00000000002b55bc>] arch_ftrace_ops_list_func+0x24c/0x258) [<0000000000f5f0fc>] ftrace_common+0x1c/0x20 [<00000000001044f6>] arch_cpu_idle+0x6/0x28 [<0000000000f4acf6>] default_idle_call+0x76/0x128 [<00000000001cc374>] do_idle+0xf4/0x1b0 [<00000000001cc6ce>] cpu_startup_entry+0x36/0x40 [<0000000000119d00>] smp_start_secondary+0x140/0x150 [<0000000000f5d2ae>] restart_int_handler+0x6e/0x90 Mark arch_cpu_idle() noinstr like all other architectures with CONFIG_ARCH_WANTS_NO_INSTR (should) have it to fix this. | ||||
| CVE-2023-53858 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error If clk_get_rate() fails, the clk that has just been allocated needs to be freed. | ||||
| CVE-2023-54251 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX. syzkaller found zero division error [0] in div_s64_rem() called from get_cycle_time_elapsed(), where sched->cycle_time is the divisor. We have tests in parse_taprio_schedule() so that cycle_time will never be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed(). The problem is that the types of divisor are different; cycle_time is s64, but the argument of div_s64_rem() is s32. syzkaller fed this input and 0x100000000 is cast to s32 to be 0. @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000} We use s64 for cycle_time to cast it to ktime_t, so let's keep it and set max for cycle_time. While at it, we prevent overflow in setup_txtime() and add another test in parse_taprio_schedule() to check if cycle_time overflows. Also, we add a new tdc test case for this issue. [0]: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline] RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline] RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344 Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10 RSP: 0018:ffffc90000acf260 EFLAGS: 00010206 RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000 RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934 R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800 R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> get_packet_txtime net/sched/sch_taprio.c:508 [inline] taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577 taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658 dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732 __dev_xmit_skb net/core/dev.c:3821 [inline] __dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135 __ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196 ip6_finish_output net/ipv6/ip6_output.c:207 [inline] NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228 dst_output include/net/dst.h:458 [inline] NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303 ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508 ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666 addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175 process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597 worker_thread+0x60f/0x1240 kernel/workqueue.c:2748 kthread+0x2fe/0x3f0 kernel/kthread.c:389 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: | ||||
| CVE-2023-53856 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: of: overlay: Call of_changeset_init() early When of_overlay_fdt_apply() fails, the changeset may be partially applied, and the caller is still expected to call of_overlay_remove() to clean up this partial state. However, of_overlay_apply() calls of_resolve_phandles() before init_overlay_changeset(). Hence if the overlay fails to apply due to an unresolved symbol, the overlay_changeset.cset.entries list is still uninitialized, and cleanup will crash with a NULL-pointer dereference in overlay_removal_is_ok(). Fix this by moving the call to of_changeset_init() from init_overlay_changeset() to of_overlay_fdt_apply(), where all other early initialization is done. | ||||