Export limit exceeded: 26155 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26155 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40208 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: fix module removal if firmware download failed Fix remove if firmware failed to load: qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2 qcom-iris aa00000.video-codec: firmware download failed qcom-iris aa00000.video-codec: core init failed then: $ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind Triggers: genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ video_cc_mvs0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ video_cc_mvs0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ gcc_video_axi0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ------------[ cut here ]------------ gcc_video_axi0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- Skip deinit if initialization never succeeded. | ||||
| CVE-2025-40091 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix too early devlink_free() in ixgbe_remove() Since ixgbe_adapter is embedded in devlink, calling devlink_free() prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free() to the end. KASAN report: BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] Read of size 8 at addr ffff0000adf813e0 by task bash/2095 CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full) [...] Call trace: show_stack+0x30/0x90 (C) dump_stack_lvl+0x9c/0xd0 print_address_description.constprop.0+0x90/0x310 print_report+0x104/0x1f0 kasan_report+0x88/0x180 __asan_report_load8_noabort+0x20/0x30 ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe] ixgbe_remove+0x2d0/0x8c0 [ixgbe] pci_device_remove+0xa0/0x220 device_remove+0xb8/0x170 device_release_driver_internal+0x318/0x490 device_driver_detach+0x40/0x68 unbind_store+0xec/0x118 drv_attr_store+0x64/0xb8 sysfs_kf_write+0xcc/0x138 kernfs_fop_write_iter+0x294/0x440 new_sync_write+0x1fc/0x588 vfs_write+0x480/0x6a0 ksys_write+0xf0/0x1e0 __arm64_sys_write+0x70/0xc0 invoke_syscall.constprop.0+0xcc/0x280 el0_svc_common.constprop.0+0xa8/0x248 do_el0_svc+0x44/0x68 el0_svc+0x54/0x160 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 | ||||
| CVE-2025-40200 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: reject negative file sizes in squashfs_read_inode() Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs. This warning is ultimately caused because the underlying Squashfs file system returns a file with a negative file size. This commit checks for a negative file size and returns EINVAL. [phillip@squashfs.org.uk: only need to check 64 bit quantity] | ||||
| CVE-2025-40106 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: fix divide-by-zero in comedi_buf_munge() The comedi_buf_munge() function performs a modulo operation `async->munge_chan %= async->cmd.chanlist_len` without first checking if chanlist_len is zero. If a user program submits a command with chanlist_len set to zero, this causes a divide-by-zero error when the device processes data in the interrupt handler path. Add a check for zero chanlist_len at the beginning of the function, similar to the existing checks for !map and CMDF_RAWDATA flag. When chanlist_len is zero, update munge_count and return early, indicating the data was handled without munging. This prevents potential kernel panics from malformed user commands. | ||||
| CVE-2025-40108 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped. | ||||
| CVE-2025-40109 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rng - Ensure set_ent is always present Ensure that set_ent is always set since only drbg provides it. | ||||
| CVE-2025-40110 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a null-ptr access in the cursor snooper Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code. | ||||
| CVE-2025-40197 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mc: Clear minor number before put device The device minor should not be cleared after the device is released. | ||||
| CVE-2025-40119 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential null deref in ext4_mb_init() In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy() lacks null pointer checking, this leads to a null pointer dereference. ================================================================== EXT4-fs: no memory for groupinfo slab cache BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP PTI CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none) RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40 Call Trace: <TASK> xa_destroy+0x61/0x130 ext4_mb_init+0x483/0x540 __ext4_fill_super+0x116d/0x17b0 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 do_new_mount+0x197/0x300 __x64_sys_mount+0x116/0x150 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy() to prevent this issue. The same fix is also applied to ext4_mb_largest_free_orders_destroy(). | ||||
| CVE-2025-40195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mount: handle NULL values in mnt_ns_release() When calling in listmount() mnt_ns_release() may be passed a NULL pointer. Handle that case gracefully. | ||||
| CVE-2025-40120 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. | ||||
| CVE-2025-40121 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping When an invalid value is passed via quirk option, currently bytcr_rt5640 driver just ignores and leaves as is, which may lead to unepxected results like OOB access. This patch adds the sanity check and corrects the input mapping to the certain default value if an invalid value is passed. | ||||
| CVE-2025-40122 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error When running perf_fuzzer on PTL, sometimes the below "unchecked MSR access error" is seen when accessing IA32_PMC_x_CFG_B MSRs. [ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30) [ 55.611280] Call Trace: [ 55.611282] <TASK> [ 55.611284] ? intel_pmu_config_acr+0x87/0x160 [ 55.611289] intel_pmu_enable_acr+0x6d/0x80 [ 55.611291] intel_pmu_enable_event+0xce/0x460 [ 55.611293] x86_pmu_start+0x78/0xb0 [ 55.611297] x86_pmu_enable+0x218/0x3a0 [ 55.611300] ? x86_pmu_enable+0x121/0x3a0 [ 55.611302] perf_pmu_enable+0x40/0x50 [ 55.611307] ctx_resched+0x19d/0x220 [ 55.611309] __perf_install_in_context+0x284/0x2f0 [ 55.611311] ? __pfx_remote_function+0x10/0x10 [ 55.611314] remote_function+0x52/0x70 [ 55.611317] ? __pfx_remote_function+0x10/0x10 [ 55.611319] generic_exec_single+0x84/0x150 [ 55.611323] smp_call_function_single+0xc5/0x1a0 [ 55.611326] ? __pfx_remote_function+0x10/0x10 [ 55.611329] perf_install_in_context+0xd1/0x1e0 [ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10 [ 55.611333] __do_sys_perf_event_open+0xa76/0x1040 [ 55.611336] __x64_sys_perf_event_open+0x26/0x30 [ 55.611337] x64_sys_call+0x1d8e/0x20c0 [ 55.611339] do_syscall_64+0x4f/0x120 [ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e On PTL, GP counter 0 and 1 doesn't support auto counter reload feature, thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR which requires to enable auto counter reload on GP counter 0. The root cause of causing this issue is the check for auto counter reload (ACR) counter mask from user space is incorrect in intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter mask from user space could be set into hw.config1 and then written into CFG_B MSRs and trigger the MSR access warning. e.g., User may create a perf event with ACR counter mask (config2=0xcb), and there is only 1 event created, so "cpuc->n_events" is 1. The correct check condition should be "i + idx >= cpuc->n_events" instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise, the counter mask would traverse twice and an invalid "cpuc->assign[1]" bit (bit 0) is set into hw.config1 and cause MSR accessing error. Besides, also check if the ACR counter mask corresponding events are ACR events. If not, filter out these counter mask. If a event is not a ACR event, it could be scheduled to an HW counter which doesn't support ACR. It's invalid to add their counter index in ACR counter mask. Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as user could set any invalid ACR counter mask and the warning message could mislead users. | ||||
| CVE-2025-40125 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx In __blk_mq_update_nr_hw_queues() the return value of blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx fails, later changing the number of hw_queues or removing disk will trigger the following warning: kernfs: can not remove 'nr_tags', no directory WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160 Call Trace: remove_files.isra.1+0x38/0xb0 sysfs_remove_group+0x4d/0x100 sysfs_remove_groups+0x31/0x60 __kobject_del+0x23/0xf0 kobject_del+0x17/0x40 blk_mq_unregister_hctx+0x5d/0x80 blk_mq_sysfs_unregister_hctxs+0x94/0xd0 blk_mq_update_nr_hw_queues+0x124/0x760 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x92/0x120 [null_blk] kobjct_del() was called unconditionally even if sysfs creation failed. Fix it by checkig the kobject creation statusbefore deleting it. | ||||
| CVE-2023-53767 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_qmi_driver_event_work() Currently the buffer pointed by event is not freed in case ATH12K_FLAG_UNREGISTERING bit is set, this causes memory leak. Add a goto skip instead of return, to ensure event and all the list entries are freed properly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-40126 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. This commit fixes a couple of bad calculations. This will fix the return value of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. | ||||
| CVE-2025-40127 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: ks-sa - fix division by zero in ks_sa_rng_init Fix division by zero in ks_sa_rng_init caused by missing clock pointer initialization. The clk_get_rate() call is performed on an uninitialized clk pointer, resulting in division by zero when calculating delay values. Add clock initialization code before using the clock. drivers/char/hw_random/ks-sa-rng.c | 7 +++++++ 1 file changed, 7 insertions(+) | ||||
| CVE-2025-40193 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xtensa: simdisk: add input size check in proc_write_simdisk A malicious user could pass an arbitrarily bad value to memdup_user_nul(), potentially causing kernel crash. This follows the same pattern as commit ee76746387f6 ("netdevsim: prevent bad user input in nsim_dev_health_break_write()") | ||||
| CVE-2023-53761 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Fix direction for 0-length ioctl control messages The syzbot fuzzer found a problem in the usbtmc driver: When a user submits an ioctl for a 0-length control transfer, the driver does not check that the direction is set to OUT: ------------[ cut here ]------------ usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41 RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000 RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001 RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528 R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100 FS: 0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline] usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097 To fix this, we must override the direction in the bRequestType field of the control request structure when the length is 0. | ||||
| CVE-2025-40131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu() In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because rxcb->peer_id is not updated with a valid value. This is expected in monitor mode, where RX frames bypass the regular RX descriptor path that typically sets rxcb->peer_id. As a result, the peer is NULL, and link_id and link_valid fields in the RX status are not populated. This leads to a WARN_ON in mac80211 when it receives data frame from an associated station with invalid link_id. Fix this potential issue by using ppduinfo->peer_id, which holds the correct peer id for the received frame. This ensures that the peer is correctly found and the associated link metadata is updated accordingly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||