Export limit exceeded: 50964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 36384 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36384 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31771 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: move wake reason storage into validated event handlers hci_store_wake_reason() is called from hci_event_packet() immediately after stripping the HCI event header but before hci_event_func() enforces the per-event minimum payload length from hci_ev_table. This means a short HCI event frame can reach bacpy() before any bounds check runs. Rather than duplicating skb parsing and per-event length checks inside hci_store_wake_reason(), move wake-address storage into the individual event handlers after their existing event-length validation has succeeded. Convert hci_store_wake_reason() into a small helper that only stores an already-validated bdaddr while the caller holds hci_dev_lock(). Use the same helper after hci_event_func() with a NULL address to preserve the existing unexpected-wake fallback semantics when no validated event handler records a wake address. Annotate the helper with __must_hold(&hdev->lock) and add lockdep_assert_held(&hdev->lock) so future call paths keep the lock contract explicit. Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(), hci_sync_conn_complete_evt(), le_conn_complete_evt(), hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(), hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and hci_le_past_received_evt(). | ||||
| CVE-2026-31725 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31724 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_eem: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31723 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31722 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the borrowed_net flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31706 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl() smb_inherit_dacl() trusts the on-disk num_aces value from the parent directory's DACL xattr and uses it to size a heap allocation: aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...); num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces) without checking that it is consistent with the declared pdacl_size. An authenticated client whose parent directory's security.NTACL is tampered (e.g. via offline xattr corruption or a concurrent path that bypasses parse_dacl()) can present num_aces = 65535 with minimal actual ACE data. This causes a ~8 MB allocation (not kzalloc, so uninitialized) that the subsequent loop only partially populates, and may also overflow the three-way size_t multiply on 32-bit kernels. Additionally, the ACE walk loop uses the weaker offsetof(struct smb_ace, access_req) minimum size check rather than the minimum valid on-wire ACE size, and does not reject ACEs whose declared size is below the minimum. Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path. A legitimate mount.cifs client creates a parent directory over SMB (ksmbd writes a valid security.NTACL xattr), then the NTACL blob on the backing filesystem is rewritten to set num_aces = 0xFFFF while keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s hash check still passes. A subsequent SMB2 CREATE of a child under that parent drives smb2_open() into smb_inherit_dacl() (share has "vfs objects = acl_xattr" set), which fails the page allocator: WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0 Workqueue: ksmbd-io handle_ksmbd_work __alloc_frozen_pages_noprof+0x46c/0x9c0 ___kmalloc_large_node+0x68/0x130 __kmalloc_large_node_noprof+0x24/0x70 __kmalloc_noprof+0x4c9/0x690 smb_inherit_dacl+0x394/0x2430 smb2_open+0x595d/0xabe0 handle_ksmbd_work+0x3d3/0x1140 With the patch applied the added guard rejects the tampered value with -EINVAL before any large allocation runs, smb2_open() falls back to smb2_create_sd_buffer(), and the child is created with a default SD. No warning, no splat. Fix by: 1. Validating num_aces against pdacl_size using the same formula applied in parse_dacl(). 2. Replacing the raw kmalloc(sizeof * num_aces * 2) with kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe allocation. 3. Tightening the per-ACE loop guard to require the minimum valid ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and rejecting under-sized ACEs, matching the hardening in smb_check_perm_dacl() and parse_dacl(). v1 -> v2: - Replace the synthetic test-module splat in the changelog with a real-path UML + KASAN reproduction driven through mount.cifs and SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name in v1 since it does not exist in ksmbd. - Drop the commit-hash citation from the code comment per Namjae's review; keep the parse_dacl() pointer. | ||||
| CVE-2026-31677 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - limit RX SG extraction by receive buffer budget Make af_alg_get_rsgl() limit each RX scatterlist extraction to the remaining receive buffer budget. af_alg_get_rsgl() currently uses af_alg_readable() only as a gate before extracting data into the RX scatterlist. Limit each extraction to the remaining af_alg_rcvbuf(sk) budget so that receive-side accounting matches the amount of data attached to the request. If skcipher cannot obtain enough RX space for at least one chunk while more data remains to be processed, reject the recvmsg call instead of rounding the request length down to zero. | ||||
| CVE-2026-31663 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: hold dev ref until after transport_finish NF_HOOK After async crypto completes, xfrm_input_resume() calls dev_put() immediately on re-entry before the skb reaches transport_finish. The skb->dev pointer is then used inside NF_HOOK and its okfn, which can race with device teardown. Remove the dev_put from the async resumption entry and instead drop the reference after the NF_HOOK call in transport_finish, using a saved device pointer since NF_HOOK may consume the skb. This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip the okfn. For non-transport exits (decaps, gro, drop) and secondary async return points, release the reference inline when async is set. | ||||
| CVE-2026-31630 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example | ||||
| CVE-2026-31606 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: don't call cdev_init while cdev in use When calling unbind, then bind again, cdev_init reinitialized the cdev, even though there may still be references to it. That's the case when the /dev/hidg* device is still opened. This obviously unsafe behavior like oopes. This fixes this by using cdev_alloc to put the cdev on the heap. That way, we can simply allocate a new one in hidg_bind. | ||||
| CVE-2026-31573 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: Fix kernel panic due to __initconst misuse Fix a kernel panic when probing the driver as a module: Unable to handle kernel paging request at virtual address ffffd9c18eb05000 of_find_matching_node_and_match+0x5c/0x1a0 hantro_probe+0x2f4/0x7d0 [hantro_vpu] The imx8mq_vpu_shared_resources array is referenced by variant structures through their shared_devices field. When built as a module, __initconst causes this data to be freed after module init, but it's later accessed during probe, causing a page fault. The imx8mq_vpu_shared_resources is referenced from non-init code, so keeping __initconst or __initconst_or_module here is wrong. Drop the __initconst annotation and let it live in the normal .rodata section. A bug of __initconst called from regular non-init probe code leading to bugs during probe deferrals or during unbind-bind cycles. | ||||
| CVE-2026-31560 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-dw-dma: fix print error log when wait finish transaction If an error occurs, the device may not have a current message. In this case, the system will crash. In this case, it's better to use dev from the struct ctlr (struct spi_controller*). | ||||
| CVE-2026-31557 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: move async event work off nvmet-wq For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq. | ||||
| CVE-2026-31531 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for single nexthops and small Equal-Cost Multi-Path groups, this fixed allocation fails for large nexthop groups like 512 nexthops. This results in the following warning splat: WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608 [...] RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395) [...] Call Trace: <TASK> rtnetlink_rcv_msg (net/core/rtnetlink.c:6989) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) ____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585) ___sys_sendmsg (net/socket.c:2641) __sys_sendmsg (net/socket.c:2671) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Fix this by allocating the size dynamically using nh_nlmsg_size() and using nlmsg_new(), this is consistent with nexthop_notify() behavior. In addition, adjust nh_nlmsg_size_grp() so it calculates the size needed based on flags passed. While at it, also add the size of NHA_FDB for nexthop group size calculation as it was missing too. This cannot be reproduced via iproute2 as the group size is currently limited and the command fails as follows: addattr_l ERROR: message exceeded bound of 1048 | ||||
| CVE-2026-31462 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent immediate PASID reuse case PASID resue could cause interrupt issue when process immediately runs into hw state left by previous process exited with the same PASID, it's possible that page faults are still pending in the IH ring buffer when the process exits and frees up its PASID. To prevent the case, it uses idr cyclic allocator same as kernel pid's. (cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) | ||||
| CVE-2026-31410 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION Use sb->s_uuid for a proper volume identifier as the primary choice. For filesystems that do not provide a UUID, fall back to stfs.f_fsid obtained from vfs_statfs(). | ||||
| CVE-2026-23459 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ip_tunnel: adapt iptunnel_xmit_stats() to NETDEV_PCPU_STAT_DSTATS Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which call iptunnel_xmit_stats(). iptunnel_xmit_stats() was assuming tunnels were only using NETDEV_PCPU_STAT_TSTATS. @syncp offset in pcpu_sw_netstats and pcpu_dstats is different. 32bit kernels would either have corruptions or freezes if the syncp sequence was overwritten. This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid a potential cache line miss since iptunnel_xmit_stats() needs to read it. | ||||
| CVE-2026-23385 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clone set on flush only Syzbot with fault injection triggered a failing memory allocation with GFP_KERNEL which results in a WARN splat: iter.err WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992 Modules linked in: CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026 RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845 Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43 +80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9 RSP: 0018:ffffc900045af780 EFLAGS: 00010293 RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40 RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000 RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0 R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920 FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0 Call Trace: <TASK> __nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115 nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380 netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761 __sock_release net/socket.c:662 [inline] sock_close+0xc3/0x240 net/socket.c:1455 Restrict set clone to the flush set command in the preparation phase. Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree and pipapo backends to only clone the set when this iteration type is used. As for the existing NFT_ITER_UPDATE type, update the pipapo backend to use the existing set clone if available, otherwise use the existing set representation. After this update, there is no need to clone a set that is being deleted, this includes bound anonymous set. An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone interface and call it from the flush set path. | ||||
| CVE-2026-23383 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field. | ||||
| CVE-2026-23377 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz The only user of frag_size field in XDP RxQ info is bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead of DMA write size. Different assumptions in ice driver configuration lead to negative tailroom. This allows to trigger kernel panic, when using XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to 6912 and the requested offset to a huge value, e.g. XSK_UMEM__MAX_FRAME_SIZE * 100. Due to other quirks of the ZC configuration in ice, panic is not observed in ZC mode, but tailroom growing still fails when it should not. Use fill queue buffer truesize instead of DMA write size in XDP RxQ info. Fix ZC mode too by using the new helper. | ||||