Export limit exceeded: 36450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36450 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-35803 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Call mixed mode boot services on the firmware's stack Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made. | ||||
| CVE-2024-26844 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Fix WARNING in _copy_from_iter Syzkaller reports a warning in _copy_from_iter because an iov_iter is supposedly used in the wrong direction. The reason is that syzcaller managed to generate a request with a transfer direction of SG_DXFER_TO_FROM_DEV. This instructs the kernel to copy user buffers into the kernel, read into the copied buffers and then copy the data back to user space. Thus the iovec is used in both directions. Detect this situation in the block layer and construct a new iterator with the correct direction for the copy-in. | ||||
| CVE-2024-26764 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-05 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. | ||||
| CVE-2023-53182 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Avoid undefined behavior: applying zero offset to null pointer ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. | ||||
| CVE-2023-53040 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ca8210: fix mac_len negative array access This patch fixes a buffer overflow access of skb->data if ieee802154_hdr_peek_addrs() fails. | ||||
| CVE-2023-52900 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix general protection fault in nilfs_btree_insert() If nilfs2 reads a corrupted disk image and tries to reads a b-tree node block by calling __nilfs_btree_get_block() against an invalid virtual block address, it returns -ENOENT because conversion of the virtual block address to a disk block address fails. However, this return value is the same as the internal code that b-tree lookup routines return to indicate that the block being searched does not exist, so functions that operate on that b-tree may misbehave. When nilfs_btree_insert() receives this spurious 'not found' code from nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was successful and continues the insert operation using incomplete lookup path data, causing the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] ... RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline] RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline] RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238 Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c 28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02 ... Call Trace: <TASK> nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline] nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147 nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101 __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991 __block_write_begin fs/buffer.c:2041 [inline] block_write_begin+0x93/0x1e0 fs/buffer.c:2102 nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900 generic_file_write_iter+0xab/0x310 mm/filemap.c:3932 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> This patch fixes the root cause of this problem by replacing the error code that __nilfs_btree_get_block() returns on block address conversion failure from -ENOENT to another internal code -EINVAL which means that the b-tree metadata is corrupted. By returning -EINVAL, it propagates without glitches, and for all relevant b-tree operations, functions in the upper bmap layer output an error message indicating corrupted b-tree metadata via nilfs_bmap_convert_error(), and code -EIO will be eventually returned as it should be. | ||||
| CVE-2023-52828 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 6.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Detect IP == ksym.end as part of BPF program Now that bpf_throw kfunc is the first such call instruction that has noreturn semantics within the verifier, this also kicks in dead code elimination in unprecedented ways. For one, any instruction following a bpf_throw call will never be marked as seen. Moreover, if a callchain ends up throwing, any instructions after the call instruction to the eventually throwing subprog in callers will also never be marked as seen. The tempting way to fix this would be to emit extra 'int3' instructions which bump the jited_len of a program, and ensure that during runtime when a program throws, we can discover its boundaries even if the call instruction to bpf_throw (or to subprogs that always throw) is emitted as the final instruction in the program. An example of such a program would be this: do_something(): ... r0 = 0 exit foo(): r1 = 0 call bpf_throw r0 = 0 exit bar(cond): if r1 != 0 goto pc+2 call do_something exit call foo r0 = 0 // Never seen by verifier exit // main(ctx): r1 = ... call bar r0 = 0 exit Here, if we do end up throwing, the stacktrace would be the following: bpf_throw foo bar main In bar, the final instruction emitted will be the call to foo, as such, the return address will be the subsequent instruction (which the JIT emits as int3 on x86). This will end up lying outside the jited_len of the program, thus, when unwinding, we will fail to discover the return address as belonging to any program and end up in a panic due to the unreliable stack unwinding of BPF programs that we never expect. To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as part of the BPF program, so that is_bpf_text_address returns true when such a case occurs, and we are able to unwind reliably when the final instruction ends up being a call instruction. | ||||
| CVE-2023-52655 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: aqc111: check packet for fixup for true limit If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver. | ||||
| CVE-2023-52619 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Fix crash when setting number of cpus to an odd number When the number of cpu cores is adjusted to 7 or other odd numbers, the zone size will become an odd number. The address of the zone will become: addr of zone0 = BASE addr of zone1 = BASE + zone_size addr of zone2 = BASE + zone_size*2 ... The address of zone1/3/5/7 will be mapped to non-alignment va. Eventually crashes will occur when accessing these va. So, use ALIGN_DOWN() to make sure the zone size is even to avoid this bug. | ||||
| CVE-2023-52511 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: sun6i: reduce DMA RX transfer width to single byte Through empirical testing it has been determined that sometimes RX SPI transfers with DMA enabled return corrupted data. This is down to single or even multiple bytes lost during DMA transfer from SPI peripheral to memory. It seems the RX FIFO within the SPI peripheral can become confused when performing bus read accesses wider than a single byte to it during an active SPI transfer. This patch reduces the width of individual DMA read accesses to the RX FIFO to a single byte to mitigate that issue. | ||||
| CVE-2025-39781 | 1 Linux | 1 Linux Kernel | 2026-01-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Drop WARN_ON_ONCE() from flush_cache_vmap I have observed warning to occassionally trigger. | ||||
| CVE-2025-38425 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: check msg length in SMBUS block read For SMBUS block read, do not continue to read if the message length passed from the device is '0' or greater than the maximum allowed bytes. | ||||
| CVE-2025-38406 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: remove WARN on bad firmware input If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too. | ||||
| CVE-2025-21821 | 1 Linux | 1 Linux Kernel | 2026-01-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: omap: use threaded IRQ for LCD DMA When using touchscreen and framebuffer, Nokia 770 crashes easily with: BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000 Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2 Hardware name: Nokia 770 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x54/0x5c dump_stack_lvl from __schedule_bug+0x50/0x70 __schedule_bug from __schedule+0x4d4/0x5bc __schedule from schedule+0x34/0xa0 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4 __mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4 clk_prepare_lock from clk_set_rate+0x18/0x154 clk_set_rate from sossi_read_data+0x4c/0x168 sossi_read_data from hwa742_read_reg+0x5c/0x8c hwa742_read_reg from send_frame_handler+0xfc/0x300 send_frame_handler from process_pending_requests+0x74/0xd0 process_pending_requests from lcd_dma_irq_handler+0x50/0x74 lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130 __handle_irq_event_percpu from handle_irq_event+0x28/0x68 handle_irq_event from handle_level_irq+0x9c/0x170 handle_level_irq from generic_handle_domain_irq+0x2c/0x3c generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c generic_handle_arch_irq from call_with_stack+0x1c/0x24 call_with_stack from __irq_svc+0x94/0xa8 Exception stack(0xc5255da0 to 0xc5255de8) 5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248 5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94 5de0: 60000013 ffffffff __irq_svc from clk_prepare_lock+0x4c/0xe4 clk_prepare_lock from clk_get_rate+0x10/0x74 clk_get_rate from uwire_setup_transfer+0x40/0x180 uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664 spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498 __spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8 __spi_sync from spi_sync+0x24/0x40 spi_sync from ads7846_halfd_read_state+0x5c/0x1c0 ads7846_halfd_read_state from ads7846_irq+0x58/0x348 ads7846_irq from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x120/0x228 irq_thread from kthread+0xc8/0xe8 kthread from ret_from_fork+0x14/0x28 As a quick fix, switch to a threaded IRQ which provides a stable system. | ||||
| CVE-2024-29883 | 1 Miraheze | 1 Createwiki | 2026-01-02 | 4.9 Medium |
| CreateWiki is Miraheze's MediaWiki extension for requesting & creating wikis. Suppression of wiki requests does not work as intended, and always restricts visibility to those with the `(createwiki)` user right regardless of the settings one sets on a given wiki request. This may expose information to users who are not supposed to be able to access it. | ||||
| CVE-2023-50257 | 1 Eprosima | 1 Fast Dds | 2026-01-02 | 9.7 Critical |
| eProsima Fast DDS (formerly Fast RTPS) is a C++ implementation of the Data Distribution Service standard of the Object Management Group. Even with the application of SROS2, due to the issue where the data (`p[UD]`) and `guid` values used to disconnect between nodes are not encrypted, a vulnerability has been discovered where a malicious attacker can forcibly disconnect a Subscriber and can deny a Subscriber attempting to connect. Afterwards, if the attacker sends the packet for disconnecting, which is data (`p[UD]`), to the Global Data Space (`239.255.0.1:7400`) using the said Publisher ID, all the Subscribers (Listeners) connected to the Publisher (Talker) will not receive any data and their connection will be disconnected. Moreover, if this disconnection packet is sent continuously, the Subscribers (Listeners) trying to connect will not be able to do so. Since the initial commit of the `SecurityManager.cpp` code (`init`, `on_process_handshake`) on Nov 8, 2016, the Disconnect Vulnerability in RTPS Packets Used by SROS2 has been present prior to versions 2.13.0, 2.12.2, 2.11.3, 2.10.3, and 2.6.7. | ||||
| CVE-2025-68697 | 1 N8n | 1 N8n | 2025-12-31 | 7.1 High |
| n8n is an open source workflow automation platform. Prior to version 2.0.0, in self-hosted n8n instances where the Code node runs in legacy (non-task-runner) JavaScript execution mode, authenticated users with workflow editing access can invoke internal helper functions from within the Code node. This allows a workflow editor to perform actions on the n8n host with the same privileges as the n8n process, including: reading files from the host filesystem (subject to any file-access restrictions configured on the instance and OS/container permissions), and writing files to the host filesystem (subject to the same restrictions). This issue has been patched in version 2.0.0. Workarounds for this issue involve limiting file operations by setting N8N_RESTRICT_FILE_ACCESS_TO to a dedicated directory (e.g., ~/.n8n-files) and ensure it contains no sensitive data, keeping N8N_BLOCK_FILE_ACCESS_TO_N8N_FILES=true (default) to block access to .n8n and user-defined config files, and disabling high-risk nodes (including the Code node) using NODES_EXCLUDE if workflow editors are not fully trusted. | ||||
| CVE-2024-47866 | 1 Redhat | 2 Ceph, Ceph Storage | 2025-12-31 | 7.5 High |
| Ceph is a distributed object, block, and file storage platform. In versions up to and including 19.2.3, using the argument `x-amz-copy-source` to put an object and specifying an empty string as its content leads to the RGW daemon crashing, resulting in a DoS attack. As of time of publication, no known patched versions exist. | ||||
| CVE-2025-46331 | 1 Openfga | 2 Helm Charts, Openfga | 2025-12-31 | 9.8 Critical |
| OpenFGA is a high-performance and flexible authorization/permission engine built for developers and inspired by Google Zanzibar. OpenFGA v1.8.10 to v1.3.6 (Helm chart <= openfga-0.2.28, docker <= v.1.8.10) are vulnerable to authorization bypass when certain Check and ListObject calls are executed. This issue has been patched in version 1.8.11. | ||||
| CVE-2024-30146 | 1 Hcltech | 1 Domino Leap | 2025-12-31 | 4.1 Medium |
| Improper access control of endpoint in HCL Domino Leap allows certain admin users to import applications from the server's filesystem. | ||||