Export limit exceeded: 17073 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17073 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98597 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: sr9700: include receive overhead in the length check The receive fixup subtracts the Ethernet CRC from the reported packet length, but compares that payload length against the whole remaining receive buffer. The following copy starts after the three-byte header, and the cursor advance consumes both that header and the four-byte CRC. Require the payload to fit after SR_RX_OVERHEAD before copying it or advancing to the next packet. The loop already ensures that the remaining buffer is larger than the overhead, so the subtraction is safe. The issue was found by our static-analysis tool. | ||||
| CVE-2026-98447 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots LOLLM noticed that the inode btree root formatting methods copy too many bytes -- there's only one set of keys in node blocks, not two. This causes memory corruption of whatever's beyond the buffers. | ||||
| CVE-2026-112073 | 1 Tencent | 1 Ncnn | 2026-10-19 | 6.3 Medium |
| A vulnerability was identified in Tencent ncnn up to 44b02dabdcf97499281a4692ebd65bad73dcf8b6. Affected by this vulnerability is the function matmul_transb of the file src/layer/matmul.cpp of the component MatMul. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-18516 | 2026-10-18 | 9.6 Critical | ||
| An output escaping vulnerability in the Audit Logs component of Crafty Controller allows a remote, unauthenticated attacker to perform stored cross-site scripting via HTTP header injection | ||||
| CVE-2026-63442 | 1 Opnsense | 1 Core | 2026-10-17 | 8.1 High |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the unauthenticated WebGUI login usernamefld accepts carriage-return and line-feed characters that survive LOG_AUTH processing through syslog-ng-lockout.conf into the syslog-ng program destination feeding lockout_handler. The consumer's readline() processing treats an injected fragment as a separate authentication event and selects the first syntactically valid IP address from the forged line. An attacker with network access to the login page can forge failure events for another IP, causing that IP to be added to the sshlockout PF table and its active states to be killed, or forge accepted events that reset an attacker's own brute-force counter. This can block administrative, DNS, gateway, or monitoring addresses and can bypass password-guessing lockout without authentication. This issue is fixed in version 26.1.11. | ||||
| CVE-2026-109716 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-10-17 | 8.1 High |
| Incorrect boundary conditions in the JavaScript Engine component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-109715 | 1 Mozilla | 1 Firefox | 2026-10-17 | 8.1 High |
| Incorrect boundary conditions in the JavaScript Engine component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-95117 | 1 Zserge | 1 Jsmn | 2026-10-17 | N/A |
| Buffer Overflow vulnerability in zserge jsmn jsmn HEAD 25647e6 allows a remote attacker to cause a denial of service via the jsmn.h, jsmn_parse(), example/jsondump.c, dump() components | ||||
| CVE-2026-109714 | 1 Mozilla | 1 Firefox | 2026-10-17 | 5.4 Medium |
| Incorrect boundary conditions in the Layout component. This vulnerability was fixed in Firefox 158 and Thunderbird 158. | ||||
| CVE-2026-105429 | 1 Netbird | 1 Netbird | 2026-10-17 | 8 High |
| Improper neutralization of special elements in the NetBird client SSH configuration manager (client/ssh/config/manager.go) in NetBird versions 0.60.0 through 0.74.6 allows a malicious or compromised peer to execute arbitrary commands on other NetBird client hosts. The client writes a system-wide OpenSSH drop-in file (/etc/ssh/ssh_config.d/99-netbird.conf, or the equivalent under %PROGRAMDATA%\ssh\ssh_config.d on Windows) that embeds each peer FQDN or hostname inside a double-quoted Match host directive without escaping. A peer name containing a double quote breaks out of the quoted context and injects arbitrary SSH configuration directives, including exec commands, which run locally as any user on the host the next time that user runs ssh. Desktop clients on Linux, macOS, Windows and FreeBSD are affected; the Android and iOS apps are not. The issue is fixed in version 0.74.7, which accepts a peer FQDN or hostname only if it is a valid DNS name. | ||||
| CVE-2026-103930 | 1 Yhirose | 1 Cpp-httplib | 2026-10-17 | 3.7 Low |
| cpp-httplib is a C++ header-only HTTP/HTTPS library. From 0.29.0 until 0.51.0, Client::open_stream in httplib.h accepts a caller-controlled path that reaches detail::write_request_line() without the detail::encode_path() protection used by the ordinary buffered request path. Raw carriage-return and line-feed bytes in the path can therefore split the outbound HTTP/1.1 request line and inject attacker-shaped request metadata. Exploitation requires an embedding application to pass remote user input into the open_stream path and a backend or intermediary that interprets the injected bytes; the established impact is modification of backend-visible request data, not direct confidentiality or availability impact. This issue is fixed in version 0.51.0. | ||||
| CVE-2026-53709 | 2026-10-16 | 9.8 Critical | ||
| MCP Context Forge is an MCP gateway and administrative platform. Prior to 1.0.2, mcpgateway/config.py and .env.example ship a known JWT_SECRET_KEY, while verify_jwt_token() accepts HS256 tokens signed with that key and get_current_user() creates a platform administrator when the token subject matches PLATFORM_ADMIN_EMAIL and REQUIRE_USER_IN_DB is false. A remote unauthenticated attacker can therefore mint accepted administrator tokens without a database account. While the vulnerable signing key remains configured and the platform-admin bootstrap remains enabled, forged access survives password rotation, account deletion, and session revocation, allowing administrative disclosure, modification, and service disruption. This issue is fixed in version 1.0.2. | ||||
| CVE-2026-89671 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: gate nfs3 setacl by argp->mask nfsd3_proc_setacl() calls set_posix_acl() unconditionally for both ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT, passing argp->acl_access and argp->acl_default verbatim. The NFSv3 ACL decoder only populates those pointers when the corresponding mask bit is set: nfs3svc_decode_setaclargs() if (args->mask & NFS_ACL) decode into acl_access if (args->mask & NFS_DFACL) decode into acl_default /* otherwise the pointer stays NULL (pc_argzero) */ nfsd3_proc_setacl() set_posix_acl(.., ACL_TYPE_ACCESS, argp->acl_access) set_posix_acl(.., ACL_TYPE_DEFAULT, argp->acl_default) set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this ACL type" operation. A NULL pointer that means "the client did not send this arm" is therefore indistinguishable from "the client asked to remove this ACL". A SETACL with mask=NFS_ACL silently drops the directory's default ACL; mask=0 drops both. The sibling nfsd3_proc_getacl() already consults argp->mask before touching each arm; mirror that in setacl. Fix by wrapping each set_posix_acl() call in the matching mask bit check and initializing error to 0 before inode_lock so that a request with neither bit set leaves the on-disk ACLs untouched and returns nfs_ok. The out_drop_lock path and the unconditional posix_acl_release() at out: are preserved; both NULL-tolerate the skipped arms. | ||||
| CVE-2026-80731 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact. | ||||
| CVE-2026-80722 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. [edit commit message to not overclaim lack of validation nor understate driver impact] | ||||
| CVE-2026-80702 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size Two sites in vmwgfx_resource.c assign boolean literals to res->guest_memory_size, which is an unsigned long allocation-size field; the intended target is the adjacent res->guest_memory_dirty bitfield. After the assignments the field holds 0 or 1 instead of the resource's MOB allocation size: - vmw_resource_release() writes 0 (false), and - vmw_resource_unbind_list() writes 1 (true). Subsequent revalidation paths read guest_memory_size when computing the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer allocation size (vmw_resource_buf_alloc()), producing zero-length walks or wrap-around ranges that read or write past the MOB bitmap. The dirty-tracking intent of the original code (mark the resource as dirtied since the last sync) is also lost, since guest_memory_dirty is never updated. Rename both assignments to guest_memory_dirty. | ||||
| CVE-2026-80580 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: bound mode sysfs output to the sysfs buffer mode_string() uses snprintf() which can return a value larger than the remaining buffer space. show_modes() accumulates the return value into i without checking whether i has reached PAGE_SIZE, causing the offset to advance past the sysfs buffer if the modelist is long enough. Add a size parameter to mode_string() and use scnprintf() to return only the bytes actually written. Add an early return when offset already exceeds the buffer. In show_modes(), stop accumulating once the buffer is full. | ||||
| CVE-2026-74724 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: avoid out-of-bounds write in ip_vs_nat_icmp Sashiko warns that local attacker can modify the packet while it is processed by IPVS. Some places read the IP ihl field multiple times which can cause out-of-bounds access. One such place is ip_vs_nat_icmp where we can write after the validated area. Fix it by providing ciph argument just like it is done for IPv6 and use ciph->len as offset to the embedded transport header. Modify some IPv4 header checks by reading the ihl field only once. | ||||
| CVE-2026-74469 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. | ||||
| CVE-2026-74408 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index. | ||||