| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in Oray Pugongying X5 Pro 7.6.1. Affected by this issue is the function plugin_init of the file /tmp/upload_files of the component PPPoE WAN Setting Handler. Such manipulation of the argument pppd_options leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| SOEM version 2.0.0 and earlier contains multiple vulnerabilities in frame processing where a malicious device can cause the master to read data outside allocated buffers. The software uses length and offset values from device messages without validating them against buffer sizes. This can cause the master to access invalid memory locations, potentially disclosing sensitive information or causing crashes. |
| SOEM version 2.0.0 and earlier contains a vulnerability in multi-segment data transfers where a malicious device can overflow memory buffers. The software checks the total size only once at the beginning, but doesn't track the cumulative size as multiple segments arrive. An attacker can declare a small initial size to pass validation, then send additional segments that exceed the allocated buffer. This allows the attacker to write controlled data beyond buffer boundaries, potentially enabling code execution. |
| MISP mispguard is a security filtering proxy that inspects and blocks MISP feed responses based on configured rules. The process_feed_response method in src/mispguard.py was responsible for evaluating feed responses before they reached the MISP instance. The original logic only explicitly handled the case where the HTTP status code was not 200 by passing the response through without filtering, on the assumption that non-200 responses would not carry ingestible event data. However, HTTP 2xx status codes other than 200 (such as 201 Created, 203 Non-Authoritative Information, and 206 Partial Content) were also passed through unfiltered. Because MISP may still ingest content from these responses, a malicious or compromised feed host could return a 203 or 206 status code with arbitrary content, effectively bypassing all of mispguard's filtering rules. This allowed unfiltered or malicious feed data to be ingested into the MISP instance, undermining the security controls that mispguard is designed to enforce. The vulnerability requires the attacker to control or compromise a feed endpoint configured in the MISP instance. No authentication or user interaction is required beyond the feed polling mechanism already in place. |
| SOEM version 2.0.0 and earlier contains vulnerabilities where a malicious device on the network can send specially crafted messages that cause the master to write data outside allocated memory boundaries. The software performs arithmetic on message length values without proper validation, allowing negative or extremely large values to bypass safety checks. This can corrupt memory and potentially allow an attacker to execute arbitrary code on the master system. |
| A vulnerability was detected in Oray Pugongying X5 Pro 7.6.1. Affected is an unknown function of the file /etc/ipsec.conf of the component IPsec Policy Handler. The manipulation of the argument secproto results in crlf injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Incorrect Privilege Assignment vulnerability in Kodezen LLC aBlocks ablocks allows Privilege Escalation.This issue affects aBlocks: from n/a before 2.9.1. |
| A security vulnerability has been detected in Oray Pugongying X5 Pro 7.6.1. This impacts an unknown function of the component Dnsmasq. The manipulation of the argument rent_time leads to crlf injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Payment Gateway WordPress plugin through 2.2.0 does not ensure a shared secret is configured before using it to authenticate the bank's payment-notification callback, allowing unauthenticated attackers to forge a valid notification and mark any WooCommerce order as paid on installs where the secret has not been set, and the same callback lets them move any pending order to a failed state whether or not the secret is configured. |
| A security flaw has been discovered in Oray Pugongying X5 Pro 7.6.1. The impacted element is an unknown function of the component Ser2net. Performing a manipulation of the argument regmsg results in crlf injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Ndemic Creations Plague Inc Evolved up to 1.24.0.3. The affected element is an unknown function of the component Workshop Scenario Loader. Such manipulation leads to deserialization. The attack may be performed from remote. Upgrading to version 1.24.0.4 is sufficient to fix this issue. It is recommended to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix the error path in dpaa2_switch_rx()
In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd()
function is called in order to free the FD. This is incorrect since the
dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors,
meaning that it expects in the software annotation area of the FD data
to find a valid skb pointer on which to call dev_kfree_skb().
Fix this by extracting the dma_unmap_page() from
dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx()
function. This allows us to directly use free_pages() in case of an
error before an SKB was created and kfree_skb() afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
If kfd_dbg_trap_enable() fails while copying runtime_info to userspace,
it had already activated the trap, set debug_trap_enabled, taken an extra
process reference, and opened the debug event file. Return -EFAULT without
unwinding that state, leaving inconsistent trap state and a refcount
imbalance that could break later DISABLE/ENABLE.
On copy_to_user failure, deactivate the trap and undo the rest of the
enable setup before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: unregister devlink on port registration failure
cpsw_probe() registers devlink before registering the CPSW ports.
If cpsw_register_ports() fails, the error path only unregisters the
notifiers and then releases the lower level resources. It does not undo
the successful cpsw_register_devlink() call, leaving the devlink instance
and its parameters registered after probe has failed.
Add a devlink cleanup label for the path where devlink registration has
already succeeded, and use it when port registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: sparx5: clean up PSFP resources on flower setup failure
sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and
stream filter resources before adding VCAP actions. If a later step
fails, the resources allocated earlier in the function are not unwound.
Add error paths to release the stream filter, flow meter and stream gate
when setup fails after they have been acquired.
Also make sparx5_psfp_fm_add() return the acquired flow-meter id before
the existing-flow-meter early return. When an existing flow meter is
reused, sparx5_psfp_fm_get() increments its pool reference count, but the
caller previously kept psfp_fmid as 0. If a later setup step failed, the
error path could try to delete flow-meter id 0 instead of the reused flow
meter, leaving the incremented reference behind. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: protect sb_write_pointer() with invalidate lock
sb_write_pointer() reads the super block from the block device page cache
using read_cache_page_gfp(). This has the same race with BLKBSZSET as the
one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set
block size").
Take the mapping invalidate lock around read_cache_page_gfp() to
serialize the read against block size changes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: restore RX state on reload failure
lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before
reallocating the RX resources for the new MTU. If the allocation fails,
the restore path puts these fields back before restarting RX.
However, the reload path also updates rx->page_order and rx->max_mtu
before calling lan966x_fdma_rx_alloc(). These fields are not restored on
failure, so RX can be restarted with the old pages, old FDMA state and
old page pool, but with the page geometry from the failed new MTU.
This can make the XDP path advertise a frame size derived from the new
page_order while the actual RX pages still come from the old allocation.
For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be
called with a frame size larger than the restored RX pages.
lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page
pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If
fdma_alloc_coherent() fails, the new page pool is destroyed, but the
rollback path does not restore the per-port XDP RXQ mem model
registration either.
Save and restore rx->page_order and rx->max_mtu, and restore the old page
pool registration for each port's XDP RXQ before RX is started again.
This keeps the restored RX state consistent after a failed reload. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Properly acquire queue buffers in CRIU restore
When kfd_queue_acquire_buffers() was split off from
set_queue_properties_from_user(), set_queue_properties_from_criu()
was missed. Thus, set_queue_properties_from_criu() is not
filling out the buffer fields of queue_properties, which
can come up when subsequent code expects them to be non-null.
Add the proper call to kfd_queue_acquire_buffers(), and also
use the right cast types in set_queue_properties_from_criu()
(which were missed at the same time)
(cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Use devm_pm_runtime_enable()
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime_enable(), remove manual pm_runtime_disable()
invocations and move the pm_runtime handling in probe before
devm_mbox_controller_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: let stripe batch bm_seq comparison wrap-safe
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way. |
