| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Reject concurrent BIS listener setup
iso_sock_listen() drops the socket lock before calling iso_listen_bis()
to preserve the hdev->lock ordering. Two concurrent listen() calls on
the same broadcast socket can therefore both observe BT_BOUND. Caller
A can attach connA and release the locks, then caller B can acquire
them and attach connB before A publishes BT_LISTEN.
__iso_chan_add() checks whether connB already has a socket, but not
whether the socket already has a connection. The second attachment
overwrites iso_pi(sk)->conn, leaking the connA reference and leaving
connA->sk intact. Socket teardown follows connB, so later events on
connA can cause a stale socket access.
Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking
both the HCI device and socket locks in iso_listen_bis(). The connection
check also covers the interval between attachment and publication of
BT_LISTEN. Reject a competing setup with -EBADFD through the existing
unlock path before allocating another connection.
A recorded KASAN report from an instrumented kernel shows:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0
Call Trace:
iso_sock_hold+0x119/0x1f0
iso_conn_del+0xe4/0x270
hci_disconn_complete_evt+0x351/0x8c0
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 93:
sk_prot_alloc+0x113/0x220
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 93:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
sock_close+0x10/0x20 |
| Heap-based buffer overflow in Windows Partition Management Driver allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Universal Disk Format File System Driver (UDFS) allows an authorized attacker to elevate privileges locally. |
| Reliance on untrusted inputs in a security decision in Windows IKE Extension allows an unauthorized attacker to perform spoofing over a network. |
| Heap-based buffer overflow in Windows USB Driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use active memslots for the per-vCPU MMIO cache
KVM tags the per-vCPU MMIO cache with a memslot generation so that a
memslot update invalidates cached MMIO information. Both the fill and
validation paths use kvm_memslots(), which unconditionally selects address
space 0, even when the vCPU is running in SMM and using address space 1.
Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the
memslot generation to the cache key so that a memslot update could not
leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM
to the MMU role, support SMRAM address space") added the SMM address space,
these helpers were not converted to use the active memslots.
Consequently, an update to the SMM memslots can leave an entry from the old
SMM address space apparently valid after the vCPU returns to the normal
address space. A guest can then cause an access to valid RAM at the same
GFN to be returned to userspace as KVM_EXIT_MMIO.
Completing that exit through the VMM's RAM address space writes the backing
page without going through KVM's write-tracking path. If the page backs a
nested EPT table, KVM can continue using shadow translations derived from
the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault()
catches this invalid cache and memslot combination.
Use the vCPU's active memslots when caching and validating the entry.
Memslot generations are unique across address spaces, so the generation
also distinguishes the normal and SMM views. This matches the MMIO SPTE
cache, which already uses kvm_vcpu_memslots().
On an unpatched current-mainline kernel, a regression test that fills the
cache in SMM and updates only the SMM memslots fails the intended RAM write
and triggers the kvm_mmu_write_protect_fault() warning. With this change,
the same test completes the RAM write without a warning. The x86/smm_test,
set_memory_region_test, and memslot_modification_stress_test selftests also
pass. |
| Heap-based buffer overflow in Windows Sensor Data Service allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Defender Firewall Service allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Now Playing Session Manager allows an authorized attacker to elevate privileges locally. |
| A vulnerability has been found in Travisun Opptrix 0.4.0. This impacts an unknown function of the file /api/system-update/import of the component Import Endpoint. Such manipulation leads to code injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The project has been completely taken offline and deprecated. The project maintainer explains: "The mentioned security risk was a design flaw that manifested primarily in local environments during earlier stages of version development. We previously addressed and resolved this specific risk; however, because the project was restricted to a small learning scope and the main versions were intended to run exclusively on localhost, the security fix was only pushed directly to our GitHub repository before it went private." This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range-to-eof file size exchange
Norbert Szetei posted a patch containing an incomplete description of a
bug in XFS_IOC_EXCHANGE_RANGE's TO_EOF flag. The bug tricks
exchange-range into modifying a file so that it has shared blocks
starting beyond EOF, which is never allowed because files never have
written data beyond EOF, and you can only share written data blocks.
This is key to all the incorrect behavior that follows.
Eventually I got from Norbert a description of what's going wrong:
> Fair. Here it is with physical block numbers, 4k blocks. peer is the file
> that gets rewritten and file1 is the one that ends up with the flag
> cleared.
>
> Start, nothing shared:
>
> peer size 4096 -> [100]
> file1 size 12288 -> [200] [201] [202]
> donor1 size 4096 -> [300]
> donor2 size 4096 -> [400]
>
> 1. FICLONERANGE peer's block into file1's middle slot:
>
> peer size 4096 -> [100]
> file1 size 12288 -> [200] [100] [202] reflink flag set
> ^^^^^ both files own block 100
>
> 2. XFS_IOC_EXCHANGE_RANGE file1 against donor1, file1_offset 0,
> file2_offset 8192, length 0, TO_EOF. One block is exchanged, and the sizes
> are exchanged with it:
>
> file1 size 4096 -> [200] [100] [300] reflink flag set
> ^^^^^^^^^^^ still owned, now past the size
> donor1 size 12288 -> [202]
>
> file1 says it is one block long while it still owns three. Nothing was
> unmapped. file2_offset is block 2, so this exchange cannot clear a flag.
>
> 3. XFS_IOC_EXCHANGE_RANGE file1 against donor2, both offsets 0, length 4096.
> By i_disk_size this is two one-block files exchanging everything, so
> xmi_can_exchange_reflink_flags() agrees and the flag is cleared:
>
> file1 size 4096 -> [400] [100] [300] reflink flag CLEARED
> donor2 size 4096 -> [200]
>
> Block 100 is still shared with peer.
>
> 4. pwrite(file1, 4096, 4096), which is file1's second slot, block 100.
> xfs_is_cow_inode(file1) is false, so no CoW:
>
> peer size 4096 -> [100] same block, new contents
>
> Block 100 is the only one that matters here. PoC below, it reads a file
> called peer in the current directory. The filesystem needs reflink and
> exchange-range, which mkfs.xfs 7.x turns on by default.
So yes, TO_EOF is screwing up the file size even if it's actually
exchanging the data block correctly. The following is the intended
behavior of XFS_EXCHANGE_RANGE_TO_EOF, as described by its manpage:
"Ignore the length parameter. All bytes in file1_fd from file1_offset
to EOF are moved to file2_fd, and file2's size is set to
(file2_offset+(file1_length-file1_offset)). Meanwhile, all bytes in
file2 from file2_offset to EOF are moved to file1 and file1's size is
set to (file1_offset+(file2_length-file2_offset))."
In other words, if we only exchange a portion of the file data, then we
should only exchange the portion of the file size that relates to the
exchanged data. Unfortunately, the code swaps the ondisk file size and
the incore file sizes, which is incorrect if the caller passes in a
nonzero offset.
Having confused the file sizes, the PoC uses a second exchange-range
call on what looks like a non-reflinked single-block file. Because the
file size is set incorrectly, exchange-range thinks it's exchanging the
full contents of two files and clears the reflink flag on the broken
file. That enables an extending write of the broken file to rewrite the
shared block that's just past EOF. This has become known colloquially
as refluxfs.
Once the file sizes are set correctly, the second exchange-range no
longer thinks that it's doing a full-contents swap, so it won't clear
the reflink flag on either of its file arguments.
Norbert followed up to an earlier version of this patch with a second
complaint about us not handling the i_disk_size state correctly:
> The offsets are bounded against the incore i_size but subtracted from
>
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: hold a reference to nodes found by link name
tipc_node_find_by_name() returns a node after dropping its RCU read lock
without taking a reference. The LINK_SET, LINK_GET and LINK_RESET_STATS
handlers then lock and access the node, racing with timer-driven cleanup of
a down peer. Generic netlink serialization does not exclude the node
timer.
The following interleaving can leave a handler using a freed node:
CPU 0: find the node under RCU and release the node read lock
CPU 1: tipc_node_timeout() clears the links and unlinks the down node
CPU 1: drop the list and timer references, queuing tipc_node_free()
CPU 0: leave the RCU read-side critical section
CPU 1: complete the grace period and free the node
CPU 0: acquire the node lock through the stale pointer
LINK_SET also uses the node's media address after releasing the node lock,
when passing queued packets to tipc_bearer_xmit().
KASAN on v7.3-rc5 reported:
BUG: KASAN: slab-use-after-free in _raw_read_lock_bh
Write of size 4 at addr ffff88807e06f008 by task poc/92
Call Trace:
_raw_read_lock_bh kernel/locking/spinlock.c:287
tipc_nl_node_set_link net/tipc/node.c:2475
genl_family_rcv_msg_doit net/netlink/genetlink.c:1114
genl_rcv_msg net/netlink/genetlink.c:1209
netlink_rcv_skb net/netlink/af_netlink.c:2575
Allocated by task 0:
tipc_node_create net/tipc/node.c:539
tipc_node_check_dest net/tipc/node.c:1196
tipc_disc_rcv net/tipc/discover.c:252
Freed by task 92:
kfree mm/slub.c:6801
rcu_core kernel/rcu/tree.c:2919
Last potentially related work creation:
__call_rcu_common.constprop.0 kernel/rcu/tree.c:3181
tipc_node_timeout net/tipc/node.c:814
Acquire a reference to the selected node with kref_get_unless_zero() before
leaving RCU, returning NULL if the node has already been released. Release
that reference on every caller exit after the last node access, including
transmission in LINK_SET. Keep the existing link lookup order and locking
so concurrent link removal still takes the existing error paths. |
| Heap-based buffer overflow in Windows Remote Desktop Protocol allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Wired AutoConfig Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In reset_per_cpu_data(), al is computed as:
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
al += sizeof(struct nlattr);
skb = genlmsg_new(al, GFP_KERNEL);
...
nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
...
msg = nla_data(nla);
memset(msg, 0, al);
Because al includes sizeof(struct nlattr) (the 4-byte attribute header),
genlmsg_new() allocates al bytes of tailroom starting at nla.
However, msg points to nla_data(nla), which is located
sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al)
therefore writes al bytes starting from msg, exceeding the allocated
buffer by sizeof(struct nlattr) (4 bytes) and corrupting
skb_shared_info.
Fix this by letting al represent only the payload length, allocating
the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing
al bytes from msg. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix use-after-free on input2 registration failure
alps_input_configured() stores data->input2 before calling
input_register_device(). If registration fails, input_free_device()
frees the input device but data->input2 still points to the freed memory.
alps_input_configured() calls hid_hw_open() before allocating input2, so
URBs are already active and raw_event can fire during the failure window.
A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event()
to dereference the freed data->input2 -> use-after-free.
Fix by only storing input2 into drvdata after successful registration
and adding a NULL guard in the raw_event path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fs/xattr: don't assume the inode is locked in path_unlink/path_rmdir
bpf_lsm_has_d_inode_locked() makes the verifier rewrite
bpf_[set|remove]_dentry_xattr() to the _locked variants, which assume
that the caller already holds the inode's i_rwsem. The path_unlink and
path_rmdir hooks are listed, but security_path_unlink() and
security_path_rmdir() run before vfs_unlink()/vfs_rmdir() take the
victim inode's i_rwsem, so a sleepable BPF LSM program attached to
either hook mutates the victim's xattrs without the lock held.
Drop the two path hooks from d_inode_locked_hooks so that the verifier
keeps the locking bpf_[set|remove]_dentry_xattr() variants, which take
the lock themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: remove stale channels from all sessions on teardown
ksmbd_sessions_deregister() removes a connection's channels from other
sessions' channel lists only while conn->binding is still set:
if (conn->binding) {
hash_for_each_safe(sessions_table, ...)
ksmbd_chann_del(conn, sess);
}
conn->binding is a transient flag: it is cleared once a binding
SESSION_SETUP completes, and also by a subsequent non-binding
SESSION_SETUP on the same connection (a reauthentication on a bound
channel, or a new SessionId==0 setup). A connection that has bound a
channel into another session's ksmbd_chann_list and then clears
conn->binding leaves that channel behind when it disconnects: the
channel, whose chann->conn points at the now freed struct ksmbd_conn,
stays on the owner session's list.
When the owning connection later tears down, the second loop
dereferences the stale channel:
xa_for_each(&sess->ksmbd_chann_list, chann_id, chann)
if (chann->conn != conn)
ksmbd_conn_set_exiting(chann->conn); /* freed */
which is a use-after-free write into the freed ksmbd_conn (the same
stale channel is also walked by show_proc_session() through /proc). The
session is leaked as well, because its channel list never empties.
Remove the conn->binding gate so a connection always removes its
channels from every session on teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix life cycle of the nested_mmus array
The nested_mmus array holds the shadow page tables that are used when
a guest is running a nested context. These structures are allocated on
VCPU_INIT for whole guest, which implies that they may have to be
relocated as the array grows.
Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and
that the allocation requires relocation, that vcpu will still be
running with a pointer to the previous structure, which will have been
freed.
Fix this by turning the array of structures to an array of pointers,
which is now allocated at VM creation, sized to the absolute maximum
that KVM can handle.
In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No
reallocation is ever performed, and the life cycle of each object is
much clearer:
- the nested_mmus array is allocated in kvm_init_nested(), and freed
in kvm_arch_destroy_vm()
- s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed
on kvm_arch_flush_shadow_all()
Finally, the freeing of vcpu->arch.vncr_array is made consistent
rather than being done on some failure paths, but not others. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Restore Ordered MMIO Writes for Tx Doorbells
The DQL accounting state which tracks the number of bytes queued for the
NIC to transmit, namely dql->num_queued, is updated by the ICE driver
when it invokes __netdev_tx_sent_queue(). Subsequently the driver
updates the hardware queue tail allowing the NIC to begin processing the
work queue. The queue accounting update should be ordered before the NIC
begins transmitting descriptors.
The transmit path currently updates the hardware doorbell using
writel_relaxed(), which (on arm64) does not provide the same ordering
guarantees between writes to normal memory and writes to MMIO registers
that writel() does. This introduces a potential race where the NIC
begins transmitting descriptors before the dql->num_queued update is
globally visible. If the NIC finishes before the update is observed by
dql_completed(), it detects an invalid state where more bytes have been
completed than have been queued. When this happens the following BUG_ON
is triggered.
BUG_ON(count > num_queued - dql->num_completed);
This has been observed and manifests as the following crash (note that
the trace has been trimmed) in an environment with sustained network
load that uses an Intel Corporation Ethernet Controller E810-XXV for SFP
(rev 02) on an arm64 machine. Replacing writel_relaxed() with writel()
in a test kernel eliminated the crash in the user's workload, which
previously reproduced the issue reliably.
kernel BUG at lib/dynamic_queue_limits.c:99
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
pc : dql_completed+0x268/0x2a0
lr : ice_clean_tx_irq+0x1d4/0x620 [ice]
Call trace:
dql_completed+0x268/0x2a0 (P)
ice_napi_poll+0x94/0x520 [ice]
__napi_poll+0x48/0x3f0
net_rx_action+0x194/0x420
This restores the behaviour prior to commit ccde82e90946 ("ice: add E830
Earliest TxTime First Offload support"), which changed the notification
mechanism from writel() to writel_relaxed(). |
