| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd938x: fix missing mbhc init error handling
MBHC initialisation can fail so add the missing error handling to avoid
dereferencing an error pointer when later configuring the jack:
Unable to handle kernel paging request at virtual address fffffffffffffff8
pc : wcd_mbhc_start+0x28/0x380 [snd_soc_wcd_mbhc]
lr : wcd938x_codec_set_jack+0x28/0x48 [snd_soc_wcd938x]
Call trace:
wcd_mbhc_start+0x28/0x380 [snd_soc_wcd_mbhc]
wcd938x_codec_set_jack+0x28/0x48 [snd_soc_wcd938x]
snd_soc_component_set_jack+0x28/0x8c [snd_soc_core]
qcom_snd_wcd_jack_setup+0x7c/0x19c [snd_soc_qcom_common]
sc8280xp_snd_init+0x20/0x2c [snd_soc_sc8280xp]
snd_soc_link_init+0x28/0x90 [snd_soc_core]
snd_soc_bind_card+0x628/0xbfc [snd_soc_core]
snd_soc_register_card+0xec/0x104 [snd_soc_core]
devm_snd_soc_register_card+0x4c/0xa4 [snd_soc_core]
sc8280xp_platform_probe+0xf0/0x108 [snd_soc_sc8280xp] |
| In the Linux kernel, the following vulnerability has been resolved:
md: don't dereference mddev after export_rdev()
Except for initial reference, mddev->kobject is referenced by
rdev->kobject, and if the last rdev is freed, there is no guarantee that
mddev is still valid. Hence mddev should not be used anymore after
export_rdev().
This problem can be triggered by following test for mdadm at very
low rate:
New file: mdadm/tests/23rdev-lifetime
devname=${dev0##*/}
devt=`cat /sys/block/$devname/dev`
pid=""
runtime=2
clean_up_test() {
pill -9 $pid
echo clear > /sys/block/md0/md/array_state
}
trap 'clean_up_test' EXIT
add_by_sysfs() {
while true; do
echo $devt > /sys/block/md0/md/new_dev
done
}
remove_by_sysfs(){
while true; do
echo remove > /sys/block/md0/md/dev-${devname}/state
done
}
echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed"
add_by_sysfs &
pid="$pid $!"
remove_by_sysfs &
pid="$pid $!"
sleep $runtime
exit 0
Test cmd:
./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime
Test result:
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bcb: 0000 [#4] PREEMPT SMP
CPU: 0 PID: 1292 Comm: test Tainted: G D W 6.5.0-rc2-00121-g01e55c376936 #562
RIP: 0010:md_wakeup_thread+0x9e/0x320 [md_mod]
Call Trace:
<TASK>
mddev_unlock+0x1b6/0x310 [md_mod]
rdev_attr_store+0xec/0x190 [md_mod]
sysfs_kf_write+0x52/0x70
kernfs_fop_write_iter+0x19a/0x2a0
vfs_write+0x3b5/0x770
ksys_write+0x74/0x150
__x64_sys_write+0x22/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix this problem by don't dereference mddev after export_rdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: Fix potential null ptr dereference in dev_pm_opp_get_required_pstate()
"opp" pointer is dereferenced before the IS_ERR_OR_NULL() check. Fix it by
removing the dereference to cache opp_table and dereference it directly
where opp_table is used.
This fixes the following smatch warning:
drivers/opp/core.c:232 dev_pm_opp_get_required_pstate() warn: variable
dereferenced before IS_ERR check 'opp' (see line 230) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt: avoid overflow in bnxt_get_nvram_directory()
The value of an arithmetic expression is subject
of possible overflow due to a failure to cast operands to a larger data
type before performing arithmetic. Used macro for multiplication instead
operator for avoiding overflow.
Found by Security Code and Linux Verification
Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: fix null-ptr-deref in handshake_nl_done_doit()
We should not call trace_handshake_cmd_done_err() if socket lookup has failed.
Also we should call trace_handshake_cmd_done_err() before releasing the file,
otherwise dereferencing sock->sk can return garbage.
This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable")
Unable to handle kernel paging request at virtual address dfff800000000003
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000003] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
lr : handshake_nl_done_doit+0x180/0x9c8
sp : ffff800096e37180
x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000
x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8
x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000
x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000
x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001
x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003
x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078
x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000
Call trace:
handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline]
genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x56c/0x840 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908) |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
When the best clk is searched, we iterate over all possible clk.
If we find a better match, the previous one, if any, needs to be freed.
If a better match has already been found, we still need to free the new
one, otherwise it leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: sunxi-ng: mp: Fix dual-divider clock rate readback
When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).
Fix this by incorporating the P divider offset into the calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: Fix __bch_btree_node_alloc to make the failure behavior consistent
In some specific situations, the return value of __bch_btree_node_alloc
may be NULL. This may lead to a potential NULL pointer dereference in
caller function like a calling chain :
btree_split->bch_btree_node_alloc->__bch_btree_node_alloc.
Fix it by initializing the return value in __bch_btree_node_alloc. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix incorrect io_kiocb reference in io_link_skb
In io_link_skb function, there is a bug where prev_notif is incorrectly
assigned using 'nd' instead of 'prev_nd'. This causes the context
validation check to compare the current notification with itself instead
of comparing it with the previous notification.
Fix by using the correct prev_nd parameter when obtaining prev_notif. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix gmap_helper_zap_one_page() again
A few checks were missing in gmap_helper_zap_one_page(), which can lead
to memory corruption in the guest under specific circumstances.
Add the missing checks. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix memory leak in get_file_all_info()
In get_file_all_info(), if vfs_getattr() fails, the function returns
immediately without freeing the allocated filename, leading to a memory
leak.
Fix this by freeing the filename before returning in this error case. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory and information leak in smb3_reconfigure()
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: phy: isp1301: fix non-OF device reference imbalance
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
| Use after free in Aura in Google Chrome prior to 139.0.7258.127 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Medium) |
| IBM Security QRadar 3.12 EDR uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive credential information. |
| .NET Remote Code Execution Vulnerability |
| IBM InfoSphere Information Server 11.7 could allow a local user to execute privileged commands due to the improper handling of permissions. |
| .NET, .NET Framework, and Visual Studio Remote Code Execution Vulnerability |
| .NET and Visual Studio Remote Code Execution Vulnerability |
