| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious CPU microcode resulting in loss of confidentiality and integrity of a confidential guest running under AMD SEV-SNP. |
| Ceph is a distributed object, block, and file storage platform. In versions 19.2.3 and below, it is possible to send an JWT that has "none" as JWT alg. And by doing so the JWT signature is not checked. The vulnerability is most likely in the RadosGW OIDC provider. As of time of publication, a known patched version has yet to be published. |
| A flaw was found in Red Hat Enterprise Application Platform 8. When an OIDC app that serves multiple tenants attempts to access the second tenant, it should prompt the user to log in again since the second tenant is secured with a different OIDC configuration. The underlying issue is in OidcSessionTokenStore when determining if a cached token should be used or not. This logic needs to be updated to take into account the new "provider-url" option in addition to the "realm" option.
EAP-7 does not provide the vulnerable provider-url configuration option in its OIDC implementation and is not affected by this flaw. |
| check-jsonschema is a CLI and set of pre-commit hooks for jsonschema validation. The default cache strategy uses the basename of a remote schema as the name of the file in the cache, e.g. `https://example.org/schema.json` will be stored as `schema.json`. This naming allows for conflicts. If an attacker can get a user to run `check-jsonschema` against a malicious schema URL, e.g., `https://example.evil.org/schema.json`, they can insert their own schema into the cache and it will be picked up and used instead of the appropriate schema. Such a cache confusion attack could be used to allow data to pass validation which should have been rejected. This issue has been patched in version 0.30.0. All users are advised to upgrade. A few workarounds exist: 1. Users can use `--no-cache` to disable caching. 2. Users can use `--cache-filename` to select filenames for use in the cache, or to ensure that other usages do not overwrite the cached schema. (Note: this flag is being deprecated as part of the remediation effort.) 3. Users can explicitly download the schema before use as a local file, as in `curl -LOs https://example.org/schema.json; check-jsonschema --schemafile ./schema.json` |
| In OpenStack Neutron before 25.0.1, neutron/extensions/tagging.py can use an incorrect ID during policy enforcement. It does not apply the proper policy check for changing network tags. An unprivileged tenant is able to change (add and clear) tags on network objects that do not belong to the tenant, and this action is not subjected to the proper policy authorization check. This affects 23 before 23.2.1, 24 before 24.0.2, and 25 before 25.0.1. |
| This vulnerability exists in the TP-Link Archer C50 due to improper signature verification mechanism in the firmware upgrade process at its web interface. An attacker with administrative privileges within the router’s Wi-Fi range could exploit this vulnerability by uploading and executing malicious firmware which could lead to complete compromise of the targeted device. |
| cjwt is a C JSON Web Token (JWT) Implementation. Algorithm confusion occurs when a system improperly verifies the type of signature used, allowing attackers to exploit the lack of distinction between signing methods. If the system doesn't differentiate between an HMAC signed token and an RS/EC/PS signed token during verification, it becomes vulnerable to this kind of attack. For instance, an attacker could craft a token with the alg field set to "HS256" while the server expects an asymmetric algorithm like "RS256". The server might mistakenly use the wrong verification method, such as using a public key as the HMAC secret, leading to unauthorised access. For RSA, the key can be computed from a few signatures. For Elliptic Curve (EC), two potential keys can be recovered from one signature. This can be used to bypass the signature mechanism if an application relies on asymmetrically signed tokens. This issue has been addressed in version 2.3.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Due to the lack of randomness in assigning Object Identifiers in the SAP NetWeaver AS JAVA IIOP service, an authenticated attacker with low privileges could predict the identifiers by conducting a brute force search. By leveraging knowledge of several identifiers generated close to the same time, the attacker could determine a desired identifier which could enable them to access limited system information. This poses a low risk to confidentiality without impacting the integrity or availability of the service. |
| Invision Community through 4.7.16 allows remote code execution via the applications/core/modules/admin/editor/toolbar.php IPS\core\modules\admin\editor\_toolbar::addPlugin() method. This method handles uploaded ZIP files that are extracted into the applications/core/interface/ckeditor/ckeditor/plugins/ directory without properly verifying their content. This can be exploited by admin users (with the toolbar_manage permission) to write arbitrary PHP files into that directory, leading to execution of arbitrary PHP code in the context of the web server user. |
| An improper verification of a loaded library in Zscaler Client Connector on Mac < 4.2.0.241 may allow a local attacker to elevate their privileges. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected components do not properly authenticate heartbeat messages. This could allow an unauthenticated remote attacker to affected the availability of secondary RTLS systems configured using a TeeRevProxy service and potentially cause loss of data generated during the time the attack is ongoing. |
| sshpiper is a reverse proxy for sshd. Starting in version 1.0.50 and prior to version 1.3.0, the way the proxy protocol listener is implemented in sshpiper can allow an attacker to forge their connecting address. Commit 2ddd69876a1e1119059debc59fe869cb4e754430 added the proxy protocol listener as the only listener in sshpiper, with no option to toggle this functionality off. This means that any connection that sshpiper is directly (or in some cases indirectly) exposed to can use proxy protocol to forge its source address. Any users of sshpiper who need logs from it for whitelisting/rate limiting/security investigations could have them become much less useful if an attacker is sending a spoofed source address. Version 1.3.0 contains a patch for the issue. |
| Improper verification of cryptographic signature issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. The affected app cannot detect event data with invalid signatures. |
| Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious microcode, potentially resulting in loss of integrity of x86 instruction execution, loss of confidentiality and integrity of data in x86 CPU privileged context and compromise of SMM execution environment. |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The firmware upgrade function in the admin web interface of the Rittal IoT Interface & CMC III Processing Unit devices checks if
the patch files are signed before executing the containing run.sh
script. The signing process is kind of an HMAC with a long string as key
which is hard-coded in the firmware and is freely available for
download. This allows crafting malicious "signed" .patch files in order
to compromise the device and execute arbitrary code. |
| Laravel Reverb provides a real-time WebSocket communication backend for Laravel applications. Prior to 1.4.0, there is an issue where verification signatures for requests sent to Reverb's Pusher-compatible API were not being verified. This API is used in scenarios such as broadcasting a message from a backend service or for obtaining statistical information (such as number of connections) about a given channel. This issue only affects the Pusher-compatible API endpoints and not the WebSocket connections themselves. In order to exploit this vulnerability, the application ID which, should never be exposed, would need to be known by an attacker. This vulnerability is fixed in 1.4.0. |
| An improper file signature check in Palo Alto Networks Cortex XDR agent may allow an attacker to bypass the Cortex XDR agent's executable blocking capabilities and run untrusted executables on the device. This issue can be leveraged to execute untrusted software without being detected or blocked. |
| ABB is aware of privately reported vulnerabilities in the product versions referenced in this CVE. An attacker could exploit these vulnerabilities by sending a specially crafted firmware or configuration to the system node, causing the node to stop, become inaccessible, or allowing the attacker to take control of the node. |
