| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The mysqlnd wire protocol parser reads fields out of server packets before checking that the packet still holds enough bytes for them. A malicious or compromised MySQL server can send a truncated packet and make the client read past the end of the packet buffer, which is undefined behaviour and can crash the process. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| NoMachine mDNS Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NoMachine. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the parsing of mDNS resource records. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-30982. |
| GStreamer rtpL16depay Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the processing of RTP payload elements. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-31143. |
| Mongoose is an embedded web server and network library. Prior to 7.23, ppp_handle_ipv6cp() in src/l2_ppp.c trusts the 16-bit IPv6CP len field without checking it against the received payload size. On a PPP or PPPoE link using MG_ENABLE_TCPIP and MG_ENABLE_IPV6, an unauthenticated adjacent peer can complete the required LCP exchange and send a short Configure-Request with an oversized length, causing ppp_tx_frame() to read beyond recv_queue.buf and write beyond tx.buf. The same length misuse can also expose adjacent heap bytes in a reply or hang the event loop through find_opt(). This issue is fixed in version 7.23. |
| Integer overflow or wraparound in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to elevate privileges locally. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's JPEG decoder can write a full-width scanline into a buffer sized for a requested draft scale. ImagingJpegDecode does not verify libjpeg's actual output width and component count after scaling is requested, and an 8-bit lossless SOF3 JPEG decoded by a build linked to libjpeg-turbo 3.x can ignore the requested downscaling geometry. An attacker can supply such a JPEG to an application that uses draft() or thumbnail() to request downscaling. This can corrupt heap memory, crash the process, or potentially allow code execution. Older libjpeg-turbo 2.x and IJG builds reject the SOF3 input. This issue is fixed in version 13.0.0. |
| A Heap-based Buffer Overflow vulnerability in the VXLAN Gateway Daemon (vgd) of Juniper Networks Junos OS allows a malicious or compromised SDN-controller to cause a complete outage of the OVSDB control plane and possibly remote code execution. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a location is configured that uses the alias directive together with rewrite and a set or return directive referencing the $request_filename variable. Alternatively, the same result could be achieved when the $request_filename variable is used in an access log format directive. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NVIDIA Warp contains a vulnerability where an attacker could cause a heap-based buffer overflow. A successful exploit of this vulnerability might lead to denial of service. |
| A heap buffer overflow in HPE NonStop NDSREST could corrupt resume-execution address and may potentially redirect execution flow. |
| A heap buffer overflow in HPE NonStop OCAX could corrupt address space and may potentially redirect execution flow. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's FlashPix JPEG-tile decoder can write decoded scanlines beyond the allocated tile buffer. FlashPix (FPX) JPEG decoding selects raw mode LA with two bytes per pixel, while an unrecognized JPEG mode can be decoded as JCS_UNKNOWN with four components, causing ImagingJpegDecode to write four-component scanlines into the two-byte tile buffer. An attacker can supply a crafted OLE2 FlashPix file to an application with the optional olefile dependency installed that opens or thumbnails untrusted input. This can corrupt heap memory and may allow arbitrary code execution. This issue is fixed in version 13.0.0. |
| Photoshop Desktop is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Insufficient Granularity of Access Control vulnerability in Drupal Webform allows Forceful Browsing. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
iscsi_encode_text_output() concatenates "key=value\0" records into
login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer
allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call
sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check
the remaining buffer capacity:
*length += sprintf(output_buf, "%s=%s", er->key, er->value);
*length += 1;
output_buf = textbuf + *length;
The 8192-byte ceiling at iscsi_target_check_login_request() bounds the
*input* Login PDU payload, but a single PDU can carry up to 2048 minimal
four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte
"a=NotUnderstood\0" output record via iscsi_add_notunderstood_response().
2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB
heap overrun in the kmalloc-8k slab.
The fix introduces a static iscsi_encode_text_record() helper that uses
snprintf() with a per-call bounds check against the remaining buffer,
and threads a u32 textbuf_size parameter through
iscsi_encode_text_output(). Both call sites in
iscsi_target_handle_csg_zero() (PHASE_SECURITY) and
iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass
MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls
iscsi_release_extra_responses() to drop queued records, and returns -1;
both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR /
ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning,
so the initiator sees an explicit failed-login response rather than a
silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL
caller did that; the PHASE_SECURITY caller is converted to the same
shape.) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this. |
| A heap-based buffer overflow vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.2, FortiAnalyzer 7.4.0 through 7.4.5, FortiAnalyzer 7.2.0 through 7.2.9, FortiAnalyzer 7.0.0 through 7.0.13, FortiAnalyzer 6.4 all versions, FortiAnalyzer 6.2 all versions, FortiAnalyzer 6.0 all versions, FortiAnalyzer Cloud 7.4.1 through 7.4.5, FortiAnalyzer Cloud 7.2.1 through 7.2.9, FortiAnalyzer Cloud 7.0.1 through 7.0.13, FortiAnalyzer Cloud 6.4 all versions, FortiManager 7.6.0 through 7.6.1, FortiManager 7.4.0 through 7.4.5, FortiManager 7.2.0 through 7.2.9, FortiManager 7.0.0 through 7.0.13, FortiManager 6.4 all versions, FortiManager 6.2 all versions, FortiManager 6.0 all versions, FortiManager Cloud 7.6.2, FortiManager Cloud 7.4.1 through 7.4.5, FortiManager Cloud 7.2.1 through 7.2.9, FortiManager Cloud 7.0.1 through 7.0.13, FortiManager Cloud 6.4 all versions, FortiOS 7.6.0 through 7.6.2, FortiOS 7.4.0 through 7.4.6, FortiOS 7.2.0 through 7.2.10, FortiOS 7.0.0 through 7.0.16, FortiOS 6.4.0 through 6.4.15, FortiOS 6.2 all versions, FortiProxy 7.6.0 through 7.6.1, FortiProxy 7.4.0 through 7.4.7, FortiProxy 7.2.0 through 7.2.12, FortiProxy 7.0.0 through 7.0.19, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to execute unauthorized code or commands via specifically crafted requests. |
