Export limit exceeded: 421453 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26155 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40032 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be NULL even after EPF initialization. Then it is prudent to check that they have non-NULL values before releasing the channels. Add the checks in pci_epf_test_clean_dma_chan(). Without the checks, NULL pointer dereferences happen and they can lead to a kernel panic in some cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Call trace: dma_release_channel+0x2c/0x120 (P) pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test] pci_epc_deinit_notify+0x74/0xc0 tegra_pcie_ep_pex_rst_irq+0x250/0x5d8 irq_thread_fn+0x34/0xb8 irq_thread+0x18c/0x2e8 kthread+0x14c/0x210 ret_from_fork+0x10/0x20 [mani: trimmed the stack trace] | ||||
| CVE-2025-40030 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: check the return value of pinmux_ops::get_function_name() While the API contract in docs doesn't specify it explicitly, the generic implementation of the get_function_name() callback from struct pinmux_ops - pinmux_generic_get_function_name() - can fail and return NULL. This is already checked in pinmux_check_ops() so add a similar check in pinmux_func_name_to_selector() instead of passing the returned pointer right down to strcmp() where the NULL can get dereferenced. This is normal operation when adding new pinfunctions. | ||||
| CVE-2025-40029 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: Check return value of platform_get_resource() platform_get_resource() returns NULL in case of failure, so check its return value and propagate the error in order to prevent NULL pointer dereference. | ||||
| CVE-2025-39995 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. | ||||
| CVE-2025-39992 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: swap: check for stable address space before operating on the VMA It is possible to hit a zero entry while traversing the vmas in unuse_mm() called from swapoff path and accessing it causes the OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000446--> Loading the memory from offset 0x40 on the XA_ZERO_ENTRY as address. Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault The issue is manifested from the below race between the fork() on a process and swapoff: fork(dup_mmap()) swapoff(unuse_mm) --------------- ----------------- 1) Identical mtree is built using __mt_dup(). 2) copy_pte_range()--> copy_nonpresent_pte(): The dst mm is added into the mmlist to be visible to the swapoff operation. 3) Fatal signal is sent to the parent process(which is the current during the fork) thus skip the duplication of the vmas and mark the vma range with XA_ZERO_ENTRY as a marker for this process that helps during exit_mmap(). 4) swapoff is tried on the 'mm' added to the 'mmlist' as part of the 2. 5) unuse_mm(), that iterates through the vma's of this 'mm' will hit the non-NULL zero entry and operating on this zero entry as a vma is resulting into the oops. The proper fix would be around not exposing this partially-valid tree to others when droping the mmap lock, which is being solved with [1]. A simpler solution would be checking for MMF_UNSTABLE, as it is set if mm_struct is not fully initialized in dup_mmap(). Thanks to Liam/Lorenzo/David for all the suggestions in fixing this issue. | ||||
| CVE-2023-54324 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix a race condition in retrieve_deps There's a race condition in the multipath target when retrieve_deps races with multipath_message calling dm_get_device and dm_put_device. retrieve_deps walks the list of open devices without holding any lock but multipath may add or remove devices to the list while it is running. The end result may be memory corruption or use-after-free memory access. See this description of a UAF with multipath_message(): https://listman.redhat.com/archives/dm-devel/2022-October/052373.html Fix this bug by introducing a new rw semaphore "devices_lock". We grab devices_lock for read in retrieve_deps and we grab it for write in dm_get_device and dm_put_device. | ||||
| CVE-2016-20022 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 8.4 High |
| In the Linux kernel before 4.8, usb_parse_endpoint in drivers/usb/core/config.c does not validate the wMaxPacketSize field of an endpoint descriptor. NOTE: This vulnerability only affects products that are no longer supported by the supplier. | ||||
| CVE-2025-40150 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid migrating empty section It reports a bug from device w/ zufs: F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT F2FS-fs (dm-64): Stopped filesystem due to reason: 4 Thread A Thread B - f2fs_expand_inode_data - f2fs_allocate_pinning_section - f2fs_gc_range - do_garbage_collect w/ segno #x - writepage - f2fs_allocate_data_block - new_curseg - allocate segno #x The root cause is: fallocate on pinning file may race w/ block allocation as above, result in do_garbage_collect() from fallocate() may migrate segment which is just allocated by a log, the log will update segment type in its in-memory structure, however GC will get segment type from on-disk SSA block, once segment type changes by log, we can detect such inconsistency, then shutdown filesystem. In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE), however segno #173822 was just allocated as data type segment, so in-memory SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA). Change as below to fix this issue: - check whether current section is empty before gc - add sanity checks on do_garbage_collect() to avoid any race case, result in migrating segment used by log. - btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". | ||||
| CVE-2025-40002 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix use-after-free in tb_dp_dprx_work The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(), which does not ensure that the delayed work item tunnel->dprx_work has fully completed if it was already running. This leads to use-after-free scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while tunnel->dprx_work remains active and attempts to dereference tb_tunnel in tb_dp_dprx_work(). A typical race condition is illustrated below: CPU 0 | CPU 1 tb_dp_tunnel_active() | tb_deactivate_and_free_tunnel()| tb_dp_dprx_start() tb_tunnel_deactivate() | queue_delayed_work() tb_dp_activate() | tb_dp_dprx_stop() | tb_dp_dprx_work() //delayed worker cancel_delayed_work() | tb_tunnel_put(tunnel); | | tunnel = container_of(...); //UAF | tunnel-> //UAF Replacing cancel_delayed_work() with cancel_delayed_work_sync() is not feasible as it would introduce a deadlock: both tb_dp_dprx_work() and the cleanup path acquire tb->lock, and cancel_delayed_work_sync() would wait indefinitely for the work item that cannot proceed. Instead, implement proper reference counting: - If cancel_delayed_work() returns true (work is pending), we release the reference in the stop function. - If it returns false (work is executing or already completed), the reference is released in delayed work function itself. This ensures the tb_tunnel remains valid during work item execution while preventing memory leaks. This bug was found by static analysis. | ||||
| CVE-2025-39996 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove The original code uses cancel_delayed_work() in flexcop_pci_remove(), which does not guarantee that the delayed work item irq_check_work has fully completed if it was already running. This leads to use-after-free scenarios where flexcop_pci_remove() may free the flexcop_device while irq_check_work is still active and attempts to dereference the device. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) flexcop_pci_remove() | flexcop_pci_irq_check_work() cancel_delayed_work() | flexcop_device_kfree(fc_pci->fc_dev) | | fc = fc_pci->fc_dev; // UAF This is confirmed by a KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff8880093aa8c8 by task bash/135 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x1be/0x460 flexcop_device_kmalloc+0x54/0xe0 flexcop_pci_probe+0x1f/0x9d0 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30 Freed by task 135: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 flexcop_device_kfree+0x32/0x50 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work has finished before the device memory is deallocated. This bug was initially identified through static analysis. To reproduce and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced artificial delays within the flexcop_pci_irq_check_work() function to increase the likelihood of triggering the bug. | ||||
| CVE-2025-40019 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: essiv - Check ssize for decryption and in-place encryption Move the ssize check to the start in essiv_aead_crypt so that it's also checked for decryption and in-place encryption. | ||||
| CVE-2025-40072 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fanotify: Validate the return value of mnt_ns_from_dentry() before dereferencing The function do_fanotify_mark() does not validate if mnt_ns_from_dentry() returns NULL before dereferencing mntns->user_ns. This causes a NULL pointer dereference in do_fanotify_mark() if the path is not a mount namespace object. Fix this by checking mnt_ns_from_dentry()'s return value before dereferencing it. Before the patch $ gcc fanotify_nullptr.c -o fanotify_nullptr $ mkdir A $ ./fanotify_nullptr Fanotify fd: 3 fanotify_mark: Operation not permitted $ unshare -Urm Fanotify fd: 3 Killed int main(void){ int ffd; ffd = fanotify_init(FAN_CLASS_NOTIF | FAN_REPORT_MNT, 0); if(ffd < 0){ perror("fanotify_init"); exit(EXIT_FAILURE); } printf("Fanotify fd: %d\n",ffd); if(fanotify_mark(ffd, FAN_MARK_ADD | FAN_MARK_MNTNS, FAN_MNT_ATTACH, AT_FDCWD, "A") < 0){ perror("fanotify_mark"); exit(EXIT_FAILURE); } return 0; } After the patch $ gcc fanotify_nullptr.c -o fanotify_nullptr $ mkdir A $ ./fanotify_nullptr Fanotify fd: 3 fanotify_mark: Operation not permitted $ unshare -Urm Fanotify fd: 3 fanotify_mark: Invalid argument [ 25.694973] BUG: kernel NULL pointer dereference, address: 0000000000000038 [ 25.695006] #PF: supervisor read access in kernel mode [ 25.695012] #PF: error_code(0x0000) - not-present page [ 25.695017] PGD 109a30067 P4D 109a30067 PUD 142b46067 PMD 0 [ 25.695025] Oops: Oops: 0000 [#1] SMP NOPTI [ 25.695032] CPU: 4 UID: 1000 PID: 1478 Comm: fanotify_nullpt Not tainted 6.17.0-rc4 #1 PREEMPT(lazy) [ 25.695040] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 25.695049] RIP: 0010:do_fanotify_mark+0x817/0x950 [ 25.695066] Code: 04 00 00 e9 45 fd ff ff 48 8b 7c 24 48 4c 89 54 24 18 4c 89 5c 24 10 4c 89 0c 24 e8 b3 11 fc ff 4c 8b 54 24 18 4c 8b 5c 24 10 <48> 8b 78 38 4c 8b 0c 24 49 89 c4 e9 13 fd ff ff 8b 4c 24 28 85 c9 [ 25.695081] RSP: 0018:ffffd31c469e3c08 EFLAGS: 00010203 [ 25.695104] RAX: 0000000000000000 RBX: 0000000001000000 RCX: ffff8eb48aebd220 [ 25.695110] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8eb4835e8180 [ 25.695115] RBP: 0000000000000111 R08: 0000000000000000 R09: 0000000000000000 [ 25.695142] R10: ffff8eb48a7d56c0 R11: ffff8eb482bede00 R12: 00000000004012a7 [ 25.695148] R13: 0000000000000110 R14: 0000000000000001 R15: ffff8eb48a7d56c0 [ 25.695154] FS: 00007f8733bda740(0000) GS:ffff8eb61ce5f000(0000) knlGS:0000000000000000 [ 25.695162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.695170] CR2: 0000000000000038 CR3: 0000000136994006 CR4: 00000000003706f0 [ 25.695201] Call Trace: [ 25.695209] <TASK> [ 25.695215] __x64_sys_fanotify_mark+0x1f/0x30 [ 25.695222] do_syscall_64+0x82/0x2c0 ... | ||||
| CVE-2025-24303 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-24325 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 8.8 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-39999 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix blk_mq_tags double free while nr_requests grown In the case user trigger tags grow by queue sysfs attribute nr_requests, hctx->sched_tags will be freed directly and replaced with a new allocated tags, see blk_mq_tag_update_depth(). The problem is that hctx->sched_tags is from elevator->et->tags, while et->tags is still the freed tags, hence later elevator exit will try to free the tags again, causing kernel panic. Fix this problem by replacing et->tags with new allocated tags as well. Noted there are still some long term problems that will require some refactor to be fixed thoroughly[1]. [1] https://lore.kernel.org/all/20250815080216.410665-1-yukuai1@huaweicloud.com/ | ||||
| CVE-2025-40034 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() When platform firmware supplies error information to the OS, e.g., via the ACPI APEI GHES mechanism, it may identify an error source device that doesn't advertise an AER Capability and therefore dev->aer_info, which contains AER stats and ratelimiting data, is NULL. pci_dev_aer_stats_incr() already checks dev->aer_info for NULL, but aer_ratelimit() did not, leading to NULL pointer dereferences like this one from the URL below: {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 {1}[Hardware Error]: event severity: corrected {1}[Hardware Error]: device_id: 0000:00:00.0 {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2020 {1}[Hardware Error]: aer_cor_status: 0x00001000, aer_cor_mask: 0x00002000 BUG: kernel NULL pointer dereference, address: 0000000000000264 RIP: 0010:___ratelimit+0xc/0x1b0 pci_print_aer+0x141/0x360 aer_recover_work_func+0xb5/0x130 [8086:2020] is an Intel "Sky Lake-E DMI3 Registers" device that claims to be a Root Port but does not advertise an AER Capability. Add a NULL check in aer_ratelimit() to avoid the NULL pointer dereference. Note that this also prevents ratelimiting these events from GHES. [bhelgaas: add crash details to commit log] | ||||
| CVE-2025-40050 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifier currently calls check_reg_arg() and adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations. However, if the destination register holds a pointer, these scalar adjustments are unnecessary and potentially incorrect. This patch adds a check to skip the adjustment logic when the destination register contains a pointer. | ||||
| CVE-2025-40031 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tee: fix register_shm_helper() In register_shm_helper(), fix incorrect error handling for a call to iov_iter_extract_pages(). A case is missing for when iov_iter_extract_pages() only got some pages and return a number larger than 0, but not the requested amount. This fixes a possible NULL pointer dereference following a bad input from ioctl(TEE_IOC_SHM_REGISTER) where parts of the buffer isn't mapped. | ||||
| CVE-2025-40056 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: vringh: Fix copy_to_iter return value check The return value of copy_to_iter can't be negative, check whether the copied length is equal to the requested length instead of checking for negative values. | ||||
| CVE-2025-40055 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix double free in user_cluster_connect() user_cluster_disconnect() frees "conn->cc_private" which is "lc" but then the error handling frees "lc" a second time. Set "lc" to NULL on this path to avoid a double free. | ||||