| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: flush backend after device ioctls
vhost-scsi translates guest response descriptors into userspace iovecs
when commands are submitted. Target-core completes those commands
asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while
an in-flight command still retains response iovecs translated through the
old table.
If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command
completion can write the response to an unrelated userspace object.
Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device
ioctl. This waits for in-flight commands that can still use the old
response iovecs before the ioctl returns. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: smbus: reject oversized block transfers in the common path
The SMBus block transfer length data->block[0] is validated in
i2c_smbus_xfer_emulated() but that check runs too late for tracepoints
and is skipped entirely when the adapter provides a native smbus_xfer
implementation. This allows user-controlled oversized block lengths to
reach tracepoint memcpy calls and driver callbacks unchecked.
Add an early validation in __i2c_smbus_xfer() that rejects block
transfers whose caller-supplied length is zero or exceeds
I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback
runs. data->block[0] is filled in by the device on SMBus block reads,
so the check is scoped to operations where the length is actually
supplied by the caller. This is consistent with the existing -EINVAL
convention in the emulated path and protects all downstream consumers
at once: the smbus_write tracepoint, all native smbus_xfer driver
implementations, and the emulated path.
Two distinct bugs are fixed by this change:
Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h)
trace_smbus_write() fires before any validation and copies
data->block[0]+1 bytes into a 34-byte event buffer. With
block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221.
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530
Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91
Call Trace:
<TASK>
__asan_memcpy+0x23/0x80
trace_event_raw_event_smbus_write+0x27c/0x530
__i2c_smbus_xfer+0x43a/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c)
stub_xfer() implements .smbus_xfer directly and only clamps
block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With
block[0]=0xff and command=0 the loop accesses block[1+i] for
i up to 254, far past the 34-byte union.
UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44
index 34 is out of range for type '__u8 [34]'
Call Trace:
<TASK>
__ubsan_handle_out_of_bounds+0xd7/0x120
stub_xfer+0x1971/0x198f [i2c_stub]
__i2c_smbus_xfer+0x306/0xa40
i2c_smbus_xfer+0x19e/0x340
i2cdev_ioctl_smbus+0x38f/0x7f0
i2cdev_ioctl+0x35e/0x680
__x64_sys_ioctl+0x147/0x1e0
do_syscall_64+0xcf/0x15a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: dma-unmap pages before handling migration errors
drm_pagemap_migrate_unmap_pages() relies on the pages array to determine
which pages require DMA unmapping. However,
drm_pagemap_migration_unlock_put_pages() clears the array as part of its
cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page
information if it is called afterward.
Call drm_pagemap_migrate_unmap_pages() before
drm_pagemap_migration_unlock_put_pages() so the pages array remains
valid during DMA unmapping. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: skip the zoned limits update if the zone info query failed
nvme_query_zone_info() returns either a negative errno or a positive
NVMe status code, but nvme_update_ns_info_block() only tests for the
negative case:
ret = nvme_query_zone_info(ns, lbaf, &zi);
if (ret < 0)
goto out;
If the device fails the Identify Namespace (I/O Command Set specific)
command, or the Identify Controller command issued by
nvme_set_max_append(), the positive status falls through and setup
continues with the zero-initialized zone info. nvme_update_zone_info()
then marks the queue zoned with chunk_sectors and ns->head->zsze set to
zero.
blk_validate_zoned_limits() does not check chunk_sectors, so the limits
commit succeeds. blk_revalidate_disk_zones() does reject the zero zone
size, but by then the limits are live and nothing rolls them back, so
I/O keeps being submitted to a zoned queue with a zero zone size and
disk_zone_no() shifts by ilog2(0):
nvme0n1: Invalid non power of two zone size (0)
UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16
shift exponent -1 is negative
disk_zone_no include/linux/blkdev.h:747 [inline]
bio_straddles_zones include/linux/blkdev.h:1058 [inline]
blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline]
blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605
blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196
submit_bh_wbc+0x575/0x740 fs/buffer.c:2824
__block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933
Any device, firmware or NVMe-oF target that fails this one command
reaches this.
Skip the zoned limits update in that case, and log which of the two
things happened: during a revalidation the queue keeps the zone
geometry it was last validated with, and on a first scan the namespace
is registered without zoned limits, so that it is still available as a
handle for admin commands. Neither of the paths in
nvme_query_zone_info() that return a positive status logs anything, so
the failure would otherwise be silent.
zi.zone_size is an exact indicator: every path that returns a positive
status returns before it is assigned, and after that the only failure
left is -ENODEV, which the caller already handles.
Found by FuzzNvme. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds reads in share config responses
Validate IPC share configuration payload sizes before consuming
variable-length fields. Bound veto list parsing and account for
the separator byte when deriving the path length. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation
Whiteout objects are used in the upper layer of an OverlayFS to
indicate that the file with this name does not exist in the unified
view, even if it is present in one of the lower layer file systems.
For the userspace implementations of OverlayFS (fuse-overlayfs),
whiteout objects can be created from userspace as well:
* mknod(2) with S_IFCHR and makedev(0, 0)
* renameat2(2) with RENAME_WHITEOUT,
creating the whiteout in the old place of the moved file.
This commit guards whiteout creation in both of these cases with
LANDLOCK_ACCESS_FS_MAKE_REG. Whiteout objects are *not* considered
character devices and are not bound to a driver.
LANDLOCK_ACCESS_FS_MAKE_REG describes the same permission class as a
whiteout object: creating one is the only S_IFCHR creation that the VFS
exempts from CAP_MKNOD, so it is as unprivileged as creating a regular
file, while LANDLOCK_ACCESS_FS_MAKE_CHAR and
LANDLOCK_ACCESS_FS_MAKE_BLOCK keep meaning the creation of devices that
expose a kernel interface [1].
For the mknod(2) case, introduce a Landlock erratum. The creation of
whiteout objects through mknod(2) was previously guarded using
LANDLOCK_ACCESS_FS_MAKE_CHAR, and it is now guarded using
LANDLOCK_ACCESS_FS_MAKE_REG.
For the renameat2(2) case, fix a bug: Before this commit, renameat2(2)
with RENAME_WHITEOUT would create a directory entry even when all
LANDLOCK_ACCESS_FS_MAKE_* rights were denied.
This does not affect normal renames within layered OverlayFS mounts:
When doing a regular rename() on a mounted fuse-overlayfs, it is the
fuse-overlayfs daemon that exercises renameat2() with RENAME_WHITEOUT,
and only the Landlock domain of that daemon is checked there.
Depends-on: 49c9e09d9610 ("landlock: Fix handling of disconnected directories")
Depends-on: fe72ce6710cb ("landlock: Add errata documentation section")
[mic: Record why LANDLOCK_ACCESS_FS_MAKE_REG is the matching right, and
add link(2) to the user doc] |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page()
ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set,
it can allocate a reader page with an outdated order. This isn't a big
issue, the user can still re-allocate a new reader page and try again.
However, what is more problematic is if the value of subbuf_order
changes in the middle of ring_buffer_alloc_read_page(). In that case,
bpage->order might not match the actual allocated memory.
Use bpage->order for the allocation to prevent this race. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page
Discarding a cached reader page after a concurrent ring buffer resize
uses the new global subbuf_order for the free_pages() call. This
mismatched order may crashes the kernel or leaks memory because the cached
page was allocated under the old size.
Save the actual free_page order alongside the page address to ensure we
always refer to the correct value and do not rely on the potentially
stalled cpu_buffer->subbuf_order value. The simplest is to make
free_page a buffer_data_read_page which already covers exactly what we
need: a page address and a page order. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix UAF in selftest IOPF reporting
IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from
group->pasid_array without synchronizing against PASID detach,
then a concurrent iommu_report_device_fault() can dereference
that borrowed handle's domain pointer after the detach erases
the handle and frees the backing struct iommufd_attach_handle.
TRIGGER_IOPF then dereferences the freed handle, causing a UAF.
Fix by adding a iopf_rwsem in mock_dev to follow the expected design
of a real driver. Hold its read side across the whole
iommu_report_device_fault() call, and its write side around every
path that attaches, detaches, or replaces a device domain.
This can block new reports and drains in-flight reports before an old
attach handle or the IOPF fault parameter can be removed.
Also take the write side while registering a mock device, since
it can invoke the mock driver's default-domain attach callback. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails
amd_pmc_probe() registers the LPS0 s2idle handler with
acpi_register_lps0_dev() and creates the driver's debugfs directory before
calling amd_stb_s2d_init(), which is the last step in probe that can fail.
When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot
be ioremapped on a long-running system, or the SMU rejects the S2D setup)
the error path only calls pci_dev_put() and returns. This leaves
amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks
the debugfs directory, while the devm-managed resources backing the handler
are torn down.
Reloading the module then walks the corrupted list in
acpi_register_lps0_dev() and hits:
list_add corruption. next->prev should be prev, but was NULL.
kernel BUG at lib/list_debug.c:29!
acpi_register_lps0_dev+0x44/0x80
amd_pmc_probe+0x224/0x380 [amd_pmc]
platform_probe+0x67/0x90
Even without a reload, the stale registration means the next s2idle
transition calls into torn-down driver state.
Unwind the debugfs directory and the LPS0 registration on the
amd_stb_s2d_init() error path. acpi_unregister_lps0_dev() is safe to call
unconditionally here: it is guarded on the same conditions as
acpi_register_lps0_dev(), which is exactly what amd_pmc_remove() already
relies on. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Unlink scc_entry in unix_del_edge().
Kyle Zeng reported that GC could free a dead SCC partially.
The scenario is as follows:
1) Create two SCCs:
X -. A <-> B
^--'
2) Run the following concurrently:
2-1) send() sk-B to sk-B from sk-X
2-2) close() both A and B
At 2-1), there is a small window where unix_add_edges()
publishes a new edge (B <-> B) to GC but its skb is not queued
by skb_queue_tail().
If 2-2) completes before skb_queue_tail() and GC is triggered,
it judges A <-> B as dead, but B is not freed because GC cannot
collect the not-yet-queued skb holding the B <-> B edge.
X -. A <-> B -. This edge is visible
^--' ^..' but skb is not
This itself is not a problem since the next GC run will judge
B as dead as well and free it finally.
X -. A <.> B -.
^--' ^--'
However, X's SCC forces the next GC to call unix_walk_scc_fast(),
and it iterates over A through B's scc_entry.
Let's unlink scc_entry before freeing the vertex in unix_del_edge(). |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: platform: defer connection counter increment until alloc succeeds
coresight_add_out_conn() increments nr_outconns before calling
devm_krealloc_array() and again before devm_kmalloc(). If either
allocation fails, the counter is already bumped while the corresponding
array entry is NULL or uninitialized garbage.
coresight_add_in_conn() has the same problem with nr_inconns and
devm_krealloc_array().
In both cases the probe returns -ENOMEM, which causes
coresight_get_platform_data() to call coresight_release_platform_data()
for cleanup. That function iterates up to nr_outconns (or nr_inconns)
entries and dereferences each pointer unconditionally, hitting the NULL
or garbage entry and panicking instead of failing gracefully.
Fix by moving the counter increments to after all allocations succeed,
so the struct is always consistent on any error path. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ACE size against SID sub-authorities
set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but
does not verify that the declared ACE size contains all sub-authorities
described by that field. An undersized ACE can therefore be copied
and later make the POSIX ACL deduplication walk inspect data beyond
the copied ACE boundary.
The existing initial bound check is also too small. It only ensures
that the ACE size field is accessible before set_ntacl_dacl() reads
sid.num_subauth farther into the input buffer.
Require enough input for the fixed SID header before accessing
num_subauth, reject ACEs smaller than that header, and skip ACEs
whose declared size cannot contain the complete SID. This makes the
validation consistent with the other ACE walk paths. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix shadow paging use-after-free due to unexpected role
Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due
to unexpected GFN") fixed a shadow paging mismatch between stored and
computed GFNs; the bug could be triggered by changing a PDE mapping from
outside the guest, and then deleting a memslot. The rmap_remove()
call would miss entries created after the PDE change because the GFN
of the leaf SPTE does not match the GFN of the struct kvm_mmu_page.
A similar hole however remains if the modified PDE points to a non-leaf
page. In this case the gfn can be made to match, but the role does not
match: the original large 2MB page creates a kvm_mmu_page with direct=1,
while the new 4KB needs a kvm_mmu_page with direct=0. However,
kvm_mmu_get_child_sp() does not compare the role, and therefore reuses
the page.
The next step is installing a leaf (4KB) SPTE on the new path which
records an rmap entry under the gfn resolved by the walk. But when
that child is zapped its parent kvm_mmu_page has direct=1 and
kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as
sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[]
in older kernels). It therefore fails to remove the recorded entry.
When the memslot is dropped the shadow page is freed but the rmap
entry survives, as in the scenario that was already fixed. Code that
later walks that gfn (dirty logging, MMU notifier invalidation, and
so on) dereferences an sptep that lies in the freed page, causing the
use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: don't decrement ep refcount while still holding the ep mutex
Jann Horn points out that epoll is decrementing the ep refcount and then
doing a
mutex_unlock(&ep->mtx);
afterwards. That's very wrong, because it can lead to a use-after-free.
That pattern is actually fine for the very last reference, because the
code in question will delay the actual call to "ep_free(ep)" until after
it has unlocked the mutex.
But it's wrong for the much subtler "next to last" case when somebody
*else* may also be dropping their reference and free the ep while we're
still using the mutex.
Note that this is true even if that other user is also using the same ep
mutex: mutexes, unlike spinlocks, can not be used for object ownership,
even if they guarantee mutual exclusion.
A mutex "unlock" operation is not atomic, and as one user is still
accessing the mutex as part of unlocking it, another user can come in
and get the now released mutex and free the data structure while the
first user is still cleaning up.
See our mutex documentation in Documentation/locking/mutex-design.rst,
in particular the section [1] about semantics:
"mutex_unlock() may access the mutex structure even after it has
internally released the lock already - so it's not safe for
another context to acquire the mutex and assume that the
mutex_unlock() context is not using the structure anymore"
So if we drop our ep ref before the mutex unlock, but we weren't the
last one, we may then unlock the mutex, another user comes in, drops
_their_ reference and releases the 'ep' as it now has no users - all
while the mutex_unlock() is still accessing it.
Fix this by simply moving the ep refcount dropping to outside the mutex:
the refcount itself is atomic, and doesn't need mutex protection (that's
the whole _point_ of refcounts: unlike mutexes, they are inherently
about object lifetimes). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: extend RCU protection in igmp6_send()
igmp6_send() can be called without RTNL or RCU being held.
Extend RCU protection so that we can safely fetch the net pointer
and avoid a potential UAF.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fail verification for sign-extension of packet data/data_end/data_meta
syzbot reported a kernel crash due to
commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses").
The reason is due to sign-extension of 32-bit load for
packet data/data_end/data_meta uapi field.
The original code looks like:
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */
r0 = r2
r0 += 8
if r3 > r0 goto +1
...
Note that __sk_buff->data load has 32-bit sign extension.
After verification and convert_ctx_accesses(), the final asm code looks like:
r2 = *(u64 *)(r1 +208)
r2 = (s32)r2
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
...
Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid
which may cause runtime failure.
Currently, in C code, typically we have
void *data = (void *)(long)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
and it will generate
r2 = *(u64 *)(r1 +208)
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
If we allow sign-extension,
void *data = (void *)(long)(int)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
the generated code looks like
r2 = *(u64 *)(r1 +208)
r2 <<= 32
r2 s>>= 32
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
and this will cause verification failure since "r2 <<= 32" is not allowed
as "r2" is a packet pointer.
To fix this issue for case
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
this patch added additional checking in is_valid_access() callback
function for packet data/data_end/data_meta access. If those accesses
are with sign-extenstion, the verification will fail.
[1] https://lore.kernel.org/bpf/000000000000c90eee061d236d37@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
