| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An incorrect privilege assignment vulnerability exists in Esri Portal for ArcGIS 11.5 in Windows and Linux that allows highly privileged users to create developer credentials that may grant more privileges than expected. |
| An incorrect authorization vulnerability exists in Esri Portal for ArcGIS 11.4, 11.5 and 12.0 on Windows, Linux and Kubernetes that did not correctly check permissions assigned to developer credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix overflow on long hmac keys
When a key longer than block size is supplied, it is copied and then
hashed into the real key. The memory allocated for the copy needs to
be rounded to DMA cache alignment, as otherwise the hashed key may
corrupt neighbouring memory.
The copying is performed using kmemdup, however this leads to an overflow:
reading more bytes (aligned_len - keylen) from the keylen source buffer.
Fix this by replacing kmemdup with kmalloc, followed by memcpy. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix oversized RESPONSE authenticator length check
rxgk_verify_response() decodes auth_len from the packet and is supposed
to verify that it fits in the remaining bytes. The existing check is
inverted, so oversized RESPONSE authenticators are accepted and passed
to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an
impossible length and hit BUG_ON(len).
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
RIP: __skb_to_sgvec()
[net/core/skbuff.c:5285 (discriminator 1)]
Call Trace:
skb_to_sgvec() [net/core/skbuff.c:5305]
rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81]
rxgk_verify_response() [net/rxrpc/rxgk.c:1268]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Reject authenticator lengths that exceed the remaining packet payload. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Protect RNDIS options with mutex
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
geth_alloc() increments the reference count, but geth_free() fails to
decrement it. This prevents the configuration of attributes via configfs
after unlinking the function.
Decrement the reference count in geth_free() to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
With concurrent TLB invalidations, completion wait randomly gets timed out
because cmd_sem_val was incremented outside the IOMMU spinlock, allowing
CMD_COMPL_WAIT commands to be queued out of sequence and breaking the
ordering assumption in wait_on_sem().
Move the cmd_sem_val increment under iommu->lock so completion sequence
allocation is serialized with command queuing.
And remove the unnecessary return. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger
When a durable file handle survives session disconnect (TCP close without
SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the
handle for later reconnection. However, it did not clean up the byte-range
locks on fp->lock_list.
Later, when the durable scavenger thread times out and calls
__ksmbd_close_fd(NULL, fp), the lock cleanup loop did:
spin_lock(&fp->conn->llist_lock);
This caused a slab use-after-free because fp->conn was NULL and the
original connection object had already been freed by
ksmbd_tcp_disconnect().
The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were
left dangling on the freed conn->lock_list while fp->conn was nulled out.
To fix this issue properly, we need to handle the lifetime of
smb_lock->clist across three paths:
- Safely skip clist deletion when list is empty and fp->conn is NULL.
- Remove the lock from the old connection's lock_list in
session_fd_check()
- Re-add the lock to the new connection's lock_list in
ksmbd_reopen_durable_fd(). |
| In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: chacha: Zeroize permuted_state before it leaves scope
Since the ChaCha permutation is invertible, the local variable
'permuted_state' is sufficient to compute the original 'state', and thus
the key, even after the permutation has been done.
While the kernel is quite inconsistent about zeroizing secrets on the
stack (and some prominent userspace crypto libraries don't bother at all
since it's not guaranteed to work anyway), the kernel does try to do it
as a best practice, especially in cases involving the RNG.
Thus, explicitly zeroize 'permuted_state' before it goes out of scope. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback
SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using
smp_cond_load_acquire() until the target CPU's kick_sync advances. Because
the irq_work runs in hardirq context, the waiting CPU cannot reschedule and
its own kick_sync never advances. If multiple CPUs form a wait cycle, all
CPUs deadlock.
Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to
force the CPU through do_pick_task_scx(), which queues a balance callback
to perform the wait. The balance callback drops the rq lock and enables
IRQs following the sched_core_balance() pattern, so the CPU can process
IPIs while waiting. The local CPU's kick_sync is advanced on entry to
do_pick_task_scx() and continuously during the wait, ensuring any CPU that
starts waiting for us sees the advancement and cannot form cyclic
dependencies. |
| In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: Check for out of bounds chip_id
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
[hverkuil: fix checkpatch warning for is_tw286x] |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix locking/synchronization error
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes()
The change to dynamic IDs for SM8450 platform interconnects left two links
unconverted, fix it to avoid the NULL pointer dereference in runtime,
when a pointer to a destination interconnect is not valid:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
<...>
Call trace:
icc_link_nodes+0x3c/0x100 (P)
qcom_icc_rpmh_probe+0x1b4/0x528
platform_probe+0x64/0xc0
really_probe+0xc4/0x2a8
__driver_probe_device+0x80/0x140
driver_probe_device+0x48/0x170
__device_attach_driver+0xc0/0x148
bus_for_each_drv+0x88/0xf0
__device_attach+0xb0/0x1c0
device_initial_probe+0x58/0x68
bus_probe_device+0x40/0xb8
deferred_probe_work_func+0x90/0xd0
process_one_work+0x15c/0x3c0
worker_thread+0x2e8/0x400
kthread+0x150/0x208
ret_from_fork+0x10/0x20
Code: 900310f4 911d6294 91008280 94176078 (f94002a0)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: crypto: Use the correct destructor kfunc type
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the target
function. I ran into the following type mismatch when running BPF
self-tests:
CFI failure at bpf_obj_free_fields+0x190/0x238 (target:
bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc)
Internal error: Oops - CFI: 00000000f2008228 [#1] SMP
...
As bpf_crypto_ctx_release() is also used in BPF programs and using
a void pointer as the argument would make the verifier unhappy, add
a simple stub function with the correct type and register it as the
destructor kfunc instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: adxl380: Avoid reading more entries than present in FIFO
The interrupt handler reads FIFO entries in batches of N samples, where N
is the number of scan elements that have been enabled. However, the sensor
fills the FIFO one sample at a time, even when more than one channel is
enabled. Therefore,the number of entries reported by the FIFO status
registers may not be a multiple of N; if this number is not a multiple, the
number of entries read from the FIFO may exceed the number of entries
actually present.
To fix the above issue, round down the number of FIFO entries read from the
status registers so that it is always a multiple of N. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
We observe spurious "Synchronous External Abort" exceptions
(ESR=0x96000010) and kernel crashes on Monaco-based platforms.
These faults are caused by the kernel inadvertently accessing
hypervisor-owned memory that is not properly marked as reserved.
>From boot log, The Qualcomm hypervisor reports the memory range
at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned:
qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0
However, the EFI memory map provided by firmware only reserves the
subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion
(0x91a88000–0x91afffff) is incorrectly reported as conventional
memory (from efi debug):
efi: 0x000091a40000-0x000091a87fff [Reserved...]
efi: 0x000091a88000-0x0000938fffff [Conventional...]
As a result, the allocator may hand out PFNs inside the hypervisor
owned region, causing fatal aborts when the kernel accesses those
addresses.
Add a reserved-memory carveout for the Gunyah hypervisor metadata
at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not
map or allocate from this area.
For the record:
Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC)
UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix event ring index not programmed for IPA v5.0+
For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to
CH_C_CNTXT_1. The v5.0 register definition intended to define this
field in the CH_C_CNTXT_1 fmask array but used the old identifier of
ERINDEX instead of CH_ERINDEX.
Without a valid event ring, GSI channels could never signal transfer
completions. This caused gsi_channel_trans_quiesce() to block
forever in wait_for_completion().
At least for IPA v5.2 this resolves an issue seen where runtime
suspend, system suspend, and remoteproc stop all hanged forever. It
also meant the IPA data path was completely non functional. |
