| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in WebRTC in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| An issue was discovered in do_madvise in mm/madvise.c in the Linux kernel before 5.6.8. There is a race condition between coredump operations and the IORING_OP_MADVISE implementation, aka CID-bc0c4d1e176e. |
| An issue was discovered in drivers/accessibility/speakup/spk_ttyio.c in the Linux kernel through 5.9.9. Local attackers on systems with the speakup driver could cause a local denial of service attack, aka CID-d41227544427. This occurs because of an invalid free when the line discipline is used more than once. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when a specially crafted query is run with range partitioned tables. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix out-of-bounds memset in command slot handling
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in devmap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix dead lock for suspend and resume
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/xive: fix kmemleak caused by incorrect chip_data lookup
The kmemleak reports the following memory leak:
Unreferenced object 0xc0000002a7fbc640 (size 64):
comm "kworker/8:1", pid 540, jiffies 4294937872
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 09 04 00 04 00 00 ................
00 00 a7 81 00 00 0a c0 00 00 08 04 00 04 00 00 ................
backtrace (crc 177d48f6):
__kmalloc_cache_noprof+0x520/0x730
xive_irq_alloc_data.constprop.0+0x40/0xe0
xive_irq_domain_alloc+0xd0/0x1b0
irq_domain_alloc_irqs_parent+0x44/0x6c
pseries_irq_domain_alloc+0x1cc/0x354
irq_domain_alloc_irqs_parent+0x44/0x6c
msi_domain_alloc+0xb0/0x220
irq_domain_alloc_irqs_locked+0x138/0x4d0
__irq_domain_alloc_irqs+0x8c/0xfc
__msi_domain_alloc_irqs+0x214/0x4d8
msi_domain_alloc_irqs_all_locked+0x70/0xf8
pci_msi_setup_msi_irqs+0x60/0x78
__pci_enable_msix_range+0x54c/0x98c
pci_alloc_irq_vectors_affinity+0x16c/0x1d4
nvme_pci_enable+0xac/0x9c0 [nvme]
nvme_probe+0x340/0x764 [nvme]
This occurs when allocating MSI-X vectors for an NVMe device. During
allocation the XIVE code creates a struct xive_irq_data and stores it
in irq_data->chip_data.
When the MSI-X irqdomain is later freed, xive_irq_free_data() is
responsible for retrieving this structure and freeing it. However,
after commit cc0cc23babc9 ("powerpc/xive: Untangle xive from child
interrupt controller drivers"), xive_irq_free_data() retrieves the
chip_data using irq_get_chip_data(), which looks up the data through
the child domain.
This is incorrect because the XIVE-specific irq data is associated with
the XIVE (parent) domain. As a result the lookup fails and the allocated
struct xive_irq_data is never freed, leading to the kmemleak report
shown above.
Fix this by retrieving the irq_data from the correct domain using
irq_domain_get_irq_data() and then accessing the chip_data via
irq_data_get_irq_chip_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: use sk blob accessor in socket permission helpers
SELinux socket state lives in the composite LSM socket blob.
sock_has_perm() and nlmsg_sock_has_extended_perms() currently
dereference sk->sk_security directly, which assumes the SELinux socket
blob is at offset zero.
In stacked configurations that assumption does not hold. If another LSM
allocates socket blob storage before SELinux, these helpers may read the
wrong blob and feed invalid SID and class values into AVC checks.
Use selinux_sock() instead of accessing sk->sk_security directly. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Hold eventfs_mutex and SRCU when remount walks events
Commit 340f0c7067a9 ("eventfs: Update all the eventfs_inodes from the
events descriptor") had eventfs_set_attrs() recurse through ei->children
on remount. The walk only holds the rcu_read_lock() taken by
tracefs_apply_options() over tracefs_inodes, which is wrong:
- list_for_each_entry over ei->children races with the list_del_rcu()
in eventfs_remove_rec() -- LIST_POISON1 deref, same shape as
d2603279c7d6.
- eventfs_inodes are freed via call_srcu(&eventfs_srcu, ...).
rcu_read_lock() does not extend an SRCU grace period, so ti->private
can be reclaimed under the walk.
- The writes to ei->attr race with eventfs_set_attr(), which holds
eventfs_mutex.
Reproducer:
while :; do mount -o remount,uid=$((RANDOM%1000)) /sys/kernel/tracing; done &
while :; do
echo "p:kp submit_bio" > /sys/kernel/tracing/kprobe_events
echo > /sys/kernel/tracing/kprobe_events
done
Wrap the events portion of tracefs_apply_options() in
eventfs_remount_lock()/_unlock() that take eventfs_mutex and
srcu_read_lock(&eventfs_srcu). eventfs_set_attrs() doesn't sleep so the
nested rcu_read_lock() is fine; lockdep_assert_held() pins the contract.
Comment in tracefs_drop_inode() said "RCU cycle" -- it is SRCU. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: check for nEPT/nNPT in slow flush hypercalls
Checking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa()
is only valid if an L2 guest is running *with nested EPT/NPT enabled*.
Instead use the same condition as translate_nested_gpa() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: /smack/doi: accept previously used values
Writing to /smack/doi a value that has ever been
written there in the past disables networking for
non-ambient labels.
E.g.
# cat /smack/doi
3
# netlabelctl -p cipso list
Configured CIPSO mappings (1)
DOI value : 3
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (3)
domain: "_" (IPv4)
protocol: UNLABELED
domain: DEFAULT (IPv4)
protocol: CIPSO, DOI = 3
domain: DEFAULT (IPv6)
protocol: UNLABELED
# cat /smack/ambient
_
# cat /proc/$$/attr/smack/current
_
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms
# echo foo >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms
unknown option 86
# echo 4 >/smack/doi
# echo 3 >/smack/doi
!> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17
# echo 3 >/smack/doi
!> [ 249.402261] smk_cipso_doi:678 remove rc = -2
!> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17
# ping -c1 10.1.95.12
!!> ping: 10.1.95.12: Address family for hostname not supported
# echo _ >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms
This happens because Smack keeps decommissioned DOIs,
fails to re-add them, and consequently refuses to add
the “default” domain map:
# netlabelctl -p cipso list
Configured CIPSO mappings (2)
DOI value : 3
mapping type : PASS_THROUGH
DOI value : 4
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (2)
domain: "_" (IPv4)
protocol: UNLABELED
!> (no ipv4 map for default domain here)
domain: DEFAULT (IPv6)
protocol: UNLABELED
Fix by clearing decommissioned DOI definitions and
serializing concurrent DOI updates with a new lock.
Also:
- allow /smack/doi to live unconfigured, since
adding a map (netlbl_cfg_cipsov4_map_add) may fail.
CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI
- add new DOI before removing the old default map,
so the old map remains if the add fails
(2008-02-04, Casey Schaufler) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix NULL pointer dereference on panthor_fw_unplug
This patch removes the MCU halt and wait for halt procedures during
panthor_fw_unplug() as the MCU can be in a variety of states or the FW
may not even be loaded/initialized at all, the latter of which can lead
to a NULL pointer dereference.
It should be safe on unplug to just disable the MCU without waiting for
it to halt as it may not be able to. |
| In the Linux kernel 5.0.21, mounting a crafted btrfs filesystem image can lead to slab-out-of-bounds write access in index_rbio_pages in fs/btrfs/raid56.c. |
| In xsltCopyText in transform.c in libxslt 1.1.33, a pointer variable isn't reset under certain circumstances. If the relevant memory area happened to be freed and reused in a certain way, a bounds check could fail and memory outside a buffer could be written to, or uninitialized data could be disclosed. |
| drivers/gpu/drm/radeon/radeon_display.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. NOTE: A third-party software maintainer states that the work queue allocation is happening during device initialization, which for a graphics card occurs during boot. It is not attacker controllable and OOM at that time is highly unlikely |
| An issue was discovered in the Linux kernel before 5.2.3. There is a use-after-free caused by a malicious USB device in the drivers/media/usb/dvb-usb/dvb-usb-init.c driver. |
| ICMP information such as (1) netmask and (2) timestamp is allowed from arbitrary hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: fix role switching during resume
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: inside-secure/eip93 - unregister only available algorithm
EIP93 has an options register. This register indicates which crypto
algorithms are implemented in silicon. Supported algorithms are
registered on this basis. Unregister algorithms on the same basis.
Currently, all algorithms are unregistered, even those not supported
by HW. This results in panic on platforms that don't have all options
implemented in silicon. |
