| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: only release the dirty pages io tree after successful writes
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
_fsstress_pid=""
workload()
{
dmesg -C
mkfs.btrfs -f -K $dev > /dev/null
echo 1 > /sys/kernel/debug/clear_warn_once
mount $dev $mnt
$fsstress -w -n 1024 -p 4 -d $mnt &
_fsstress_pid=$!
sleep 0
$godown $mnt
pkill --echo -PIPE fsstress > /dev/null
wait $_fsstress_pid
unset _fsstress_pid
umount $mnt
if dmesg | grep -q "WARNING"; then
fail
fi
}
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: bail out on template ct in get eval
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl()
pppol2tp_ioctl() read sock->sk->sk_user_data directly without any
locks or reference counting. If a controllable sleep was induced during
copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent
socket close could trigger pppol2tp_session_close() asynchronously. This
frees the l2tp_session structure via the l2tp_session_del_work workqueue.
Upon resuming, the ioctl thread dereferences the stale session pointer,
resulting in a Use-After-Free (UAF).
Fix this by securely fetching the session reference using the RCU-safe,
refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the
session's refcount across the sleep. We structured the function to exit
via standard err breaks, guaranteeing that l2tp_session_put() is cleanly
called on all return paths to drop the reference.
To preserve existing behavior we validate the session and its magic
signature only for the specific L2TP commands that require it. This
ensures that generic/unknown ioctls called on an unconnected socket
still return -ENOIOCTLCMD and correctly fall back to generic handlers
(e.g. in sock_do_ioctl()). |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: clean the sfp upstream if phy probing fails
Sashiko reported that we don't call sfp_bus_del_upstream() in the probe
failure path, so let's add it, otherwise the sfp-bus is left with a
dangling 'upstream' field, that may be used later on during SFP events.
This issue existed before the generic phylib sfp support, back when
drivers were calling phy_sfp_probe themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using
the PF's log_max_current_uc/mc_list capabilities. When querying a VF
vport with a larger configured max (via devlink), the firmware response
can overflow this buffer:
BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385
CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_report+0x176/0x4e4
kasan_report+0xc8/0x100
mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core]
esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core]
esw_vport_change_handler+0x6a/0x90 [mlx5_core]
process_one_work+0x87f/0x15e0
worker_thread+0x62b/0x1020
kthread+0x375/0x490
ret_from_fork+0x4dc/0x810
ret_from_fork_asm+0x11/0x20
</TASK>
Fix by querying the vport's own HCA caps to size the buffer correctly.
Refactor the function to allocate and return the MAC list internally,
removing the caller's dependency on knowing the correct max. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure
In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()
returns false (e.g. XDPSQ is full), the function returns without
unmapping the DMA address or freeing the xdp_frame allocated by
xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on
success, so the completion path cannot recover these entries.
With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind:
DMA-API: pci 0000:08:00.0: device driver has pending DMA
allocations while released from device [count=1116]
One of leaked entries details: [device address=0x000000010ffd7028]
[size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy]
WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180
...
DMA-API: Mapped at:
debug_dma_map_phys+0x4b/0xd0
dma_map_phys+0xfd/0x2d0
mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core]
mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core]
mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]
Add the missing unmap + xdp_return_frame, matching the cleanup already
done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,
so no per-frag unmap is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock between reflink and transaction commit when using flushoncommit
When using the flushoncommit mount option, we can have a deadlock between
a transaction commit and a reflink operation that copied an inline extent
to an offset beyond the current i_size of the destination node.
The deadlock happens like this:
1) Task A clones an inline extent from inode X to an offset of inode Y
that is beyond Y's current i_size. This means we copied the inline
extent's data to a folio of inode Y that is beyond its EOF, using a
call to copy_inline_to_page();
2) Task B starts a transaction commit and calls
btrfs_start_delalloc_flush() to flush delalloc;
3) The delalloc flushing sees the new dirty folio of inode Y and when it
attempts to flush it, it ends up at extent_writepage() and sees that
the offset of the folio is beyond the i_size of inode Y, so it attempts
to invalidate the folio by calling folio_invalidate(), which ends up at
btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it
tries to lock the folio's range in inode Y's extent io tree, but it
blocks since it's currently locked by task A - during a reflink we lock
the inodes and the source and destination ranges after flushing all
delalloc and waiting for ordered extent completion - after that we
don't expect to have dirty folios in the ranges, the exception is if
we have to copy an inline extent's data (because the destination offset
is not zero);
4) Task A then attempts to start a transaction to update the inode item,
and then it's blocked since the current transaction is in the
TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the
current transaction to become unblocked (its state >=
TRANS_STATE_UNBLOCKED).
So task A is waiting for the transaction commit done by task B, and
the later waiting on the extent lock of inode Y that is currently
held by task A.
Syzbot recently reported this with the following stack traces:
INFO: task kworker/u8:7:1053 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000
Workqueue: writeback wb_workfn (flush-btrfs-46)
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5298 [inline]
__schedule+0x1553/0x5240 kernel/sched/core.c:6911
__schedule_loop kernel/sched/core.c:6993 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7008
wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline]
btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914
btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline]
btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704
extent_writepage fs/btrfs/extent_io.c:1852 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline]
btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713
do_writepages+0x32e/0x550 mm/page-writeback.c:2554
__writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750
writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042
wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227
wb_do_writeback fs/fs-writeback.c:2374 [inline]
wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414
process_one_work kernel/workqueue.c:3276 [inline]
process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359
worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
INFO: task syz.4.64:6910 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.64 state:D stack:22752 pid:6910 tgid:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix OOB in pcpu_init_value
An out-of-bounds read occurs when copying element from a
BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the
same value_size that is not rounded up to 8 bytes.
The issue happens when:
1. A CGROUP_STORAGE map is created with value_size not aligned to
8 bytes (e.g., 4 bytes)
2. A pcpu map is created with the same value_size (e.g., 4 bytes)
3. Update element in 2 with data in 1
pcpu_init_value assumes that all sources are rounded up to 8 bytes,
and invokes copy_map_value_long to make a data copy, However, the
assumption doesn't stand since there are some cases where the source
may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data.
the verifier verifies exactly the size that the source claims, not
the size rounded up to 8 bytes by kernel, an OOB happens when the
source has only 4 bytes while the copy size(4) is rounded up to 8. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix clone_alias() to use the original device's devid
Currently clone_alias() assumes first argument (pdev) is always the
original device pointer. This function is called by
pci_for_each_dma_alias() which based on topology decides to send
original or alias device details in first argument.
This meant that the source devid used to look up and copy the DTE
may be incorrect, leading to wrong or stale DTE entries being
propagated to alias device.
Fix this by passing the original pdev as the opaque data argument to
both the direct clone_alias() call and pci_for_each_dma_alias(). Inside
clone_alias(), retrieve the original device from data and compute devid
from it. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked()
When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.
The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).
Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.
The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here! |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free on cdev close
This addresses a use-after-free bug when a raw bundle is disconnected
but its chardev is still opened by an application. When the application
releases the cdev, it causes the following panic when init on free is
enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130
...
Call Trace:
<TASK>
cdev_put+0x18/0x30
__fput+0x255/0x2a0
__x64_sys_close+0x3d/0x80
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The cdev is contained in the "gb_raw" structure, which is freed in the
disconnect operation. When the cdev is released at a later time,
cdev_put gets an address that points to freed memory.
To fix this use-after-free, convert the struct device from a pointer to
being embedded, that makes the lifetime of the cdev and of this device
the same. Then, use cdev_device_add, which guarantees that the device
won't be released until all references to the cdev have been released.
Finally, delegate the freeing of the structure to the device release
function, instead of freeing immediately in the disconnect callback. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free if write is called after disconnect
If a user writes to the chardev after disconnect has been called, the
kernel panics with the following trace (with
CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
BUG: kernel NULL pointer dereference, address: 0000000000000218
...
Call Trace:
<TASK>
gb_operation_create_common+0x61/0x180
gb_operation_create_flags+0x28/0xa0
gb_operation_sync_timeout+0x6f/0x100
raw_write+0x7b/0xc7 [gb_raw]
vfs_write+0xcf/0x420
? task_mm_cid_work+0x136/0x220
ksys_write+0x63/0xe0
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Disconnect calls gb_connection_destroy, which ends up freeing the
connection object. When gb_operation_sync is called in the write file
operations, its gets a freed connection as parameter and the kernel
panics.
The gb_connection_destroy cannot be moved out of the disconnect
function, as the Greybus subsystem expect all connections belonging to a
bundle to be destroyed when disconnect returns.
To prevent this bug, use a rw lock to synchronize access between write
and disconnect. This guarantees that the write function doesn't try
to use a disconnected connection. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: avoid reading already updated pages during GC
We found the following issue during fuzz testing:
page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9
memcg:f8ffff800e269c00
aops:f2fs_meta_aops ino:2
flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a)
raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618
raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00
page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio))
page_owner tracks the page as allocated
post_alloc_hook+0x58c/0x5ec
prep_new_page+0x34/0x284
get_page_from_freelist+0x2dcc/0x2e8c
__alloc_pages_noprof+0x280/0x76c
__folio_alloc_noprof+0x18/0xac
__filemap_get_folio+0x6bc/0xdc4
pagecache_get_page+0x3c/0x104
do_garbage_collect+0x5c78/0x77a4
f2fs_gc+0xd74/0x25f0
gc_thread_func+0xb28/0x2930
kthread+0x464/0x5d8
ret_from_fork+0x10/0x20
------------[ cut here ]------------
kernel BUG at mm/filemap.c:1563!
folio_end_read+0x140/0x168
f2fs_finish_read_bio+0x5c4/0xb80
f2fs_read_end_io+0x64c/0x708
bio_endio+0x85c/0x8c0
blk_update_request+0x690/0x127c
scsi_end_request+0x9c/0xb8c
scsi_io_completion+0xf0/0x250
scsi_finish_command+0x430/0x45c
scsi_complete+0x178/0x6d4
blk_mq_complete_request+0xcc/0x104
scsi_done_internal+0x214/0x454
scsi_done+0x24/0x34
which is similar to the problem reported by syzbot:
https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc
This case is consistent with the description in commit 9bf1a3f
("f2fs: avoid GC causing encrypted file corrupted"):
Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after
being written it is marked as uptodate. Then, Page 1 is moved from blkaddr
B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by
ra_data_block.
There is no need to read Page 1 again from blkaddr B, since it has already
been updated. Therefore, avoid initiating I/O in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix double-free of tx_buf skb
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/psi: fix race between file release and pressure write
A potential race condition exists between pressure write and cgroup file
release regarding the priv member of struct kernfs_open_file, which
triggers the uaf reported in [1].
Consider the following scenario involving execution on two separate CPUs:
CPU0 CPU1
==== ====
vfs_rmdir()
kernfs_iop_rmdir()
cgroup_rmdir()
cgroup_kn_lock_live()
cgroup_destroy_locked()
cgroup_addrm_files()
cgroup_rm_file()
kernfs_remove_by_name()
kernfs_remove_by_name_ns()
vfs_write() __kernfs_remove()
new_sync_write() kernfs_drain()
kernfs_fop_write_iter() kernfs_drain_open_files()
cgroup_file_write() kernfs_release_file()
pressure_write() cgroup_file_release()
ctx = of->priv;
kfree(ctx);
of->priv = NULL;
cgroup_kn_unlock()
cgroup_kn_lock_live()
cgroup_get(cgrp)
cgroup_kn_unlock()
if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv
The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards
the memory deallocation of of->priv performed within cgroup_file_release().
However, the operations involving of->priv executed within pressure_write()
are not entirely covered by the protection of cgroup_mutex. Consequently,
if the code in pressure_write(), specifically the section handling the
ctx variable executes after cgroup_file_release() has completed, a uaf
vulnerability involving of->priv is triggered.
Therefore, the issue can be resolved by extending the scope of the
cgroup_mutex lock within pressure_write() to encompass all code paths
involving of->priv, thereby properly synchronizing the race condition
occurring between cgroup_file_release() and pressure_write().
And, if an live kn lock can be successfully acquired while executing
the pressure write operation, it indicates that the cgroup deletion
process has not yet reached its final stage; consequently, the priv
pointer within open_file cannot be NULL. Therefore, the operation to
retrieve the ctx value must be moved to a point *after* the live kn
lock has been successfully acquired.
In another situation, specifically after entering cgroup_kn_lock_live()
but before acquiring cgroup_mutex, there exists a different class of
race condition:
CPU0: write memory.pressure CPU1: write cgroup.pressure=0
=========================== =============================
kernfs_fop_write_iter()
kernfs_get_active_of(of)
pressure_write()
cgroup_kn_lock_live(memory.pressure)
cgroup_tryget(cgrp)
kernfs_break_active_protection(kn)
... blocks on cgroup_mutex
cgroup_pressure_write()
cgroup_kn_lock_live(cgroup.pressure)
cgroup_file_show(memory.pressure, false)
kernfs_show(false)
kernfs_drain_open_files()
cgroup_file_release(of)
kfree(ctx)
of->priv = NULL
cgroup_kn_unlock()
... acquires cgroup_mutex
ctx = of->priv; // may now be NULL
if (ctx->psi.trigger) // NULL dereference
Consequently, there is a possibility that of->priv is NULL, the pressure
write needs to check for this.
Now that the scope of the cgroup_mutex has been expanded, the original
explicit cgroup_get/put operations are no longer necessary, this is
because acquiring/releasing the live kn lock inherently executes a
cgroup get/put operation.
[1]
BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011
Call Trace:
pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011
cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43
---truncated--- |
