| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: qdsp6: topology: check widget type before accessing data
Check widget type before accessing the private data, as this could a
virtual widget which is no associated with a dsp graph, container and
module. Accessing witout check could lead to incorrect memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()
Fix inverted condition that skips frequency change trigger,
causing kernel panics during cpufreq scaling. |
| In the Linux kernel, the following vulnerability has been resolved:
fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal
CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so
`cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls
`fwctl_register()` and then `device_add()`, fwctl_class is not yet
registered because fwctl_init() hasn't run, causing `class_to_subsys()` to
return NULL and skip knode_class initialization.
On device removal, `class_to_subsys()` returns non-NULL, and
`device_del()` calls `klist_del()` on the uninitialized knode, triggering
a NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Move ndesc initialization at end of airoha_qdma_init_rx_queue()
If queue entry or DMA descriptor list allocation fails in
airoha_qdma_init_rx_queue routine, airoha_qdma_cleanup() will trigger a
NULL pointer dereference running netif_napi_del() for RX queue NAPIs
since netif_napi_add() has never been executed to this particular RX NAPI.
The issue is due to the early ndesc initialization in
airoha_qdma_init_rx_queue() since airoha_qdma_cleanup() relies on ndesc
value to check if the queue is properly initialized. Fix the issue moving
ndesc initialization at end of airoha_qdma_init_tx routine.
Move page_pool allocation after descriptor list allocation in order to
avoid memory leaks if desc allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done()
Local sashiko review pointed it out that group->domain could be NULL when
a default domain fails to allocate during the first probe, which can crash
at domain->ops->attach_dev dereference in __iommu_attach_device() invoked
by pci_dev_reset_iommu_done().
pci_dev_reset_iommu_prepare() is fine as an old_domain pointer can be NULL.
Skip the re-attach in pci_dev_reset_iommu_done() to fix the bug. |
| Nil-pointer dereference in CreateCustomVolumeFromBackup in LXD up to version 6.8 and 5.21 on Linux allows an authenticated user with can_create_storage_volumes permissions to cause a denial of service via a specially crafted custom-volume backup tarball that omits the expires_at snapshot field. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/adfs: validate nzones in adfs_validate_bblk()
Reject ADFS disc records with a zero zone count during boot block
validation, before the disc record is used.
When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...)
which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes to
dm[-1], causing an out-of-bounds write before the allocated buffer.
adfs_validate_dr0() already rejects nzones != 1 for old-format
images. Add the equivalent check to adfs_validate_bblk() for
new-format images so that a crafted image with nzones == 0 is
rejected at probe time.
Found by syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: reject NPU_OP_RESIZE commands from userspace
NPU_OP_RESIZE is a U85-only command that the driver does not yet
implement. The existing WARN_ON(1) placeholder fires unconditionally
whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE,
causing unbounded kernel log spam.
If panic_on_warn is set the kernel panics, giving any unprivileged user
with access to the DRM device a trivial denial-of-service primitive.
Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl
rejects the command before it reaches hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
iptfs_destroy_state() calls hrtimer_cancel() while holding a spinlock
that the timer callback also acquires, leading to an ABBA deadlock on
SMP systems.
For the output timer (iptfs_timer):
- iptfs_destroy_state() holds x->lock, calls hrtimer_cancel()
- iptfs_delay_timer() callback takes x->lock
For the drop timer (drop_timer):
- iptfs_destroy_state() holds drop_lock, calls hrtimer_cancel()
- iptfs_drop_timer() callback takes drop_lock
Both timers use HRTIMER_MODE_REL_SOFT, so their callbacks run in softirq
context. When hrtimer_cancel() is called for a soft timer that is
currently executing on another CPU, hrtimer_cancel_wait_running() spins
on softirq_expiry_lock -- the same lock held by the softirq running the
callback. If the callback is blocked waiting for the spinlock held by
the caller of hrtimer_cancel(), a circular dependency forms:
CPU 0: holds lock_A -> waits for softirq_expiry_lock
CPU 1: holds softirq_expiry_lock -> waits for lock_A
Fix by calling hrtimer_cancel() before acquiring the respective locks.
hrtimer_cancel() is safe to call without holding any lock and will wait
for any in-progress callback to complete. For the output timer, the
lock is still acquired afterwards to drain the packet queue. For the
drop timer, the lock/unlock pair is removed entirely since it only
existed to serialize with the timer callback, which hrtimer_cancel()
already guarantees.
Found by source code audit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups
v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect
buffer and the workgroup buffer and is expected to release them before
returning. When any of the workgroup counts read from the buffer is zero,
the function bailed out early and skipped the cleanup, leaking the vaddr
mappings of both BOs.
Jump to the cleanup path instead of returning directly, so the mappings
are always dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
rseq: Fix using an uninitialized stack variable in rseq_exit_user_update()
There is an bug in which an uninitialized stack variable is used in
rseq_exit_user_update() as reported by syzbot:
BUG: KMSAN: kernel-infoleak in rseq_set_ids_get_csaddr include/linux/rseq_entry.h:502 [inline]
The local variable:
struct rseq_ids ids = {
.cpu_id = task_cpu(t),
.mm_cid = task_mm_cid(t),
.node_id = cpu_to_node(ids.cpu_id),
};
According to the C standard, the evaluation order of expressions in an
initializer list is indeterminately sequenced. The compiler (Clang, in
this KMSAN build) evaluates `cpu_to_node(ids.cpu_id)` *before*
`ids.cpu_id` is initialized with `task_cpu(t)`.
This is fixed by moving the assignment of ids.node_id outside the
structure initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
NFT_META_BRI_IIFHWADDR declares its destination register with
len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to
two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does
memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and
leaving the upper 2 bytes of the second register as uninitialised
nft_do_chain() stack. A downstream load of that register span leaks
those stale bytes to userspace.
Zero the second register before the memcpy so the full declared span is
written. |
| OS Command Injection vulnerability in Rapid7 InsightConnect RPM Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the repo, key, or name parameters due to insufficient input sanitization in shell command construction. |
| OS Command Injection vulnerability in Rapid7 InsightConnect SQLmap Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the api_host or api_port parameters during connection configuration due to insufficient input validation. |
| OS Command Injection vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the expression parameter due to insufficient input validation. |
| Arbitrary File Write vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to write attacker-controlled content to arbitrary file paths via the expression parameter. |
| Arbitrary File Read vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to read arbitrary files via the expression parameter due to insufficient input validation. |
| OS Command Injection vulnerability in the ping action of Rapid7 InsightConnect Ping Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host parameter due to insufficient input validation when constructing shell commands. |
| OS Command Injection vulnerability in the TR action of Rapid7 InsightConnect Translate Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to insufficient input sanitization in shell command construction. |
| OS Command Injection vulnerability in the process_string action of Rapid7 InsightConnect AWK Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to unsafe shell command construction in the processing pipeline. |
