| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hdlc_ppp: sync per-proto timers before freeing hdlc state
Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp
registers a timer via timer_setup(). That struct ppp is the
hdlc->state allocation, which detach_hdlc_protocol() frees with kfree()
in both teardown paths: unregister_hdlc_device() and the re-attach inside
attach_hdlc_protocol().
The ppp proto never registered a .detach callback, so
detach_hdlc_protocol() performs no timer synchronization before the
kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(),
is partial (it does not wait for a running callback) and only runs on the
->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A
ppp_timer callback already executing (blocked on ppp->lock) survives the
kfree and then dereferences proto->state / ppp->lock in freed memory,
leading to a use-after-free.
Fix this by adding a .detach helper that calls timer_shutdown_sync() on
every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev)
before kfree(hdlc->state), so timer_shutdown_sync()
now runs on both free paths.
timer_shutdown_sync() is used instead of timer_delete_sync() because the
keepalive path re-arms the timer through add_timer()/mod_timer() and
shutdown blocks any re-activation during teardown.
Initialize the per-protocol timers in ppp_ioctl() when the protocol is
attached, and remove the now-redundant timer_setup() from ppp_start(), so
that the timers are initialized exactly once at attach time and
ppp_timer_release() never operates on uninitialized timer_list
structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so
struct ppp's protos[i].timer is uninitialized garbage until the first
timer_setup(); without this init-at-attach, attaching the PPP protocol
without ever bringing the device up would leave timer_shutdown_sync()
operating on uninitialized memory in .detach. Moving the init out of
ppp_start() (which only runs on NETDEV_UP) into the attach path makes the
initialization unconditional and avoids initializing the same timer_list
twice.
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: char: Fix use-after-free on probe error path
rpmsg_chrdev_probe() stores the newly allocated eptdev in the default
endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If
rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while
the default endpoint may still dispatch callbacks with the stale priv
pointer.
Avoid publishing eptdev through the default endpoint until
rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv
pointer is published should be ignored by rpmsg_ept_cb(). Flow-control
updates can hit rpmsg_ept_flow_cb() in the same window, so make both
callbacks return success when priv is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds read in smb_check_perm_dacl()
The permission-check ACE walk in smb_check_perm_dacl() validates the ACE
header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it
never checks that ace->size is actually large enough to contain
num_subauth sub-authorities before compare_sids() dereferences them.
CIFS_SID_BASE_SIZE covers the SID header up to but excluding the
sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header,
so the existing guards only guarantee the 8-byte SID base, i.e. zero
sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for
i < min(local_sid->num_subauth, ace->sid.num_subauth). The local
comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid()
result) always have at least one sub-authority, and an attacker controls
the ACE revision and authority bytes (which lie within the in-bounds SID
base), so they can match one of those SIDs and force the sub_auth read.
A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of
the security descriptor therefore causes a heap out-of-bounds read of up
to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd
allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr()
into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in
ndr_decode_v4_ntacl()), so the read lands past the allocation. The
malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL
is not normalised before being written to the security.NTACL xattr) and
the read fires on a subsequent SMB2_CREATE access check, making this
reachable by an authenticated client on a share that uses ACL xattrs.
Add the missing num_subauth-versus-ace_size check, mirroring the
identical guards already present in the sibling parsers parse_dacl() and
smb_inherit_dacl(). |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd
When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.
One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.
[ 21.858578] ------------[ cut here ]------------
[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[ 21.859251] Call trace:
[ 21.859255] __queue_work+0x5e0/0x790 (P)
[ 21.859265] queue_work_on+0x6c/0xf0
[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[ 21.859318] notifier_call_chain+0xa4/0x230
[ 21.859329] srcu_notifier_call_chain+0x64/0xb8
[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common]
[ 21.859355] rproc_start+0x130/0x230
[ 21.859367] rproc_boot+0x3d4/0x518
...
Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.
This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix mechToken leak when SPNEGO decode fails after token alloc
The kernel ASN.1 BER decoder calls action callbacks incrementally as it
walks the input. When ksmbd_decode_negTokenInit() reaches the mechToken
[2] OCTET STRING element, ksmbd_neg_token_alloc() allocates
conn->mechToken immediately via kmemdup_nul(). If a later element in
the same blob is malformed, then the decoder will return nonzero after
the allocation is already live. This could happen if mechListMIC [3]
overrunse the enclosing SEQUENCE.
decode_negotiation_token() then sets conn->use_spnego = false because
both the negTokenInit and negTokenTarg grammars failed. The cleanup at
the bottom of smb2_sess_setup() is gated on use_spnego:
if (conn->use_spnego && conn->mechToken) {
kfree(conn->mechToken);
conn->mechToken = NULL;
}
so the kfree is skipped, causing the mechToken to never be freed.
This codepath is reachable pre-authentication, so untrusted clients can
cause slow memory leaks on a server without even being properly
authenticated.
Fix this up by not checking check for use_spnego, as it's not required,
so the memory will always be properly freed. At the same time, always
free the memory in ksmbd_conn_free() incase some other failure path
forgot to free it. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: prevent potential infinite loop in bond_header_parse()
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked()
When
9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
moved the error messages dumping so that they don't need to be issued by
the callers, it missed the case where __sev_firmware_shutdown() calls
__sev_platform_shutdown_locked() with a NULL argument which leads to
a NULL ptr deref on the shutdown path, during suspend to disk:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022
RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp]
That rIP is:
00000000000006fd <__sev_platform_shutdown_locked.cold>:
6fd: 8b 13 mov (%rbx),%edx
6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi
703: 89 c1 mov %eax,%ecx
Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e
RSP: 0018:ffffc90005467d00 EFLAGS: 00010282
RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000
^^^^^^^^^^^^^^^^
and %rbx is nice and clean.
Call Trace:
<TASK>
__sev_firmware_shutdown.isra.0
sev_dev_destroy
psp_dev_destroy
sp_destroy
pci_device_shutdown
device_shutdown
kernel_power_off
hibernate.cold
state_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Pass in a pointer to the function-local error var in the caller.
With that addressed, suspending the ccp shows the error properly at
least:
ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP
ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110
SEV-SNP: Leaking PFN range 0x146800-0x146a00
SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00]
...
ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0
ACPI: PM: Preparing to enter system sleep state S5
kvm: exiting hardware virtualization
reboot: Power down
Btw, this driver is crying to be cleaned up to pass in a proper I/O
struct which can be used to store information between the different
functions, otherwise stuff like that will happen in the future again. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix dereferencing uninitialized error pointer
Fix below smatch warnings:
drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked()
error: we previously assumed 'error' could be null |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down()
As discussed in the past (commit 2d3916f31891 ("ipv6: fix skb drops
in igmp6_event_query() and igmp6_event_report()")) I think the
synchronize_net() call in ipv6_mc_down() is not needed.
Under load, synchronize_net() can last between 200 usec and 5 ms.
KASAN seems to agree as well. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Add alignment check for event ring read pointer
Though we do check the event ring read pointer by "is_valid_ring_ptr"
to make sure it is in the buffer range, but there is another risk the
pointer may be not aligned. Since we are expecting event ring elements
are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer
could lead to multiple issues like DoS or ring buffer memory corruption.
So add a alignment check for event ring read pointer. |
| IBM Langflow OSS 1.0.0 through 1.10.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. |
| IBM Langflow OSS 1.0.0 through 1.10.0 allows an authenticated attacker to create a malicious flow pointing to an attacker-controlled URL that returns a specially crafted Content-Disposition header (e.g., filename="../../../target/path" ), enabling arbitrary file write operations with attacker-controlled content to any path accessible by the Langflow process. |
| Improper verification of cryptographic signature in .NET allows an unauthorized attacker to bypass a security feature over a network. |
| A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c.
Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue.
We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL pointer bug in svm_range_set_attr
The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm
before calling kfd_ioctl_svm.
(cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) |
| A possible unauthorized memory access flaw was found in the Linux kernel's cpu_entry_area mapping of X86 CPU data to memory, where a user may guess the location of exception stacks or other important data. Based on the previous CVE-2023-0597, the 'Randomize per-cpu entry area' feature was implemented in /arch/x86/mm/cpu_entry_area.c, which works through the init_cea_offsets() function when KASLR is enabled. However, despite this feature, there is still a risk of per-cpu entry area leaks. This issue could allow a local user to gain access to some important data with memory in an expected location and potentially escalate their privileges on the system. |
| IBM Langflow OSS 1.0.0 through 1.10.0 Langflow 1.9.0 could allow server-side request forgery (SSRF) due to insecure default configuration and incomplete enforcement of the SSRF protection mechanism. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values. |
