| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix MMIO read buffer leak on probe failure
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in the probe error path
before releasing the remaining device resources.
This issue was found by manual code inspection. |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. |
| Improper neutralization of special elements used in a command ('command injection') in Azure Pipelines allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config
Three related problems exist in the handling of KVM interrupt and page
resources when a queue is removed from the host's AP configuration
while assigned to a mediated device (mdev).
Problem 1:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue()
When the AP bus removes a queue device whose adapter or domain has
been removed from the host's AP configuration,
vfio_ap_mdev_remove_queue() is called. If the queue is still in the
host's AP configuration at that point, it calls
vfio_ap_mdev_reset_queue(), which issues a PQAP(ZAPQ). Since the
adapter is already gone from the host configuration, ap_zapq() returns
AP_RESPONSE_Q_NOT_AVAIL (0x01). This response code is not handled in
vfio_ap_mdev_reset_queue()'s switch statement and falls through to
the default case, which issues a WARN but does not call
vfio_ap_free_aqic_resources(). As a result, if IRQ handling was
enabled for the queue by the guest, the KVM GISC registration and
the pinned guest page holding the notification indicator byte (NIB)
are both leaked.
This is fixed by adding AP_RESPONSE_Q_NOT_AVAIL to the same case as
AP_RESPONSE_DECONFIGURED and AP_RESPONSE_CHECKSTOPPED in
vfio_ap_mdev_reset_queue(). Like those response codes, Q_NOT_AVAIL
indicates the queue is not operational and no further reset attempts
are possible; the correct action is to free the IRQ resources
immediately.
Problem 2:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in apq_status_check()
In vfio_ap_mdev_reset_queue(), there are four cases that indicate a queue
reset has not yet completed, in which case apq_reset_check() is queued to
a work queue to verify completion of the reset operation. This function
uses the PQAP(TAPQ) function to get the queue's status and calls
apq_status_check() to verify whether the reset has completed, failed or
needs to be executed again. As described in Problem #1 above,
apq_reset_check() does not specifically check for AP_RESPONSE_Q_NOT_AVAIL,
thereby potentially leaking KVM GISC registration and the pinned guest page
holding the NIB.
This is fixed by adding a case statement for AP_RESPONSE_Q_NOT_AVAIL to
apq_status_check() and returning -ENODEV for that case. The caller,
apq_reset_check() will then check for this return code and call
vfio_ap_free_aqic_resources() to prevent the leak.
Problem 3:
~~~~~~~~~
vfio_ap_free_aqic_resources() leaks saved_isc when kvm is NULL
vfio_ap_free_aqic_resources() guards the call to
kvm_s390_gisc_unregister() with:
if (q->saved_isc != VFIO_AP_ISC_INVALID &&
!WARN_ON(!(q->matrix_mdev && q->matrix_mdev->kvm)))
If matrix_mdev->kvm is NULL -- which can happen when
vfio_ap_mdev_unset_kvm() has already run and cleared kvm before a
subsequent cleanup path reaches this function -- the WARN_ON fires
and the entire block is skipped. This leaves q->saved_isc set to a
non-invalid value, creating a potential double-free on any subsequent
call to this function.
When kvm is NULL the KVM guest is already torn down, so
kvm_s390_gisc_unregister() need not and cannot be called; however,
q->saved_isc must always be cleared. Fix this by separating the
kvm_s390_gisc_unregister() call from the q->saved_isc reset. The
WARN_ON now guards only the genuinely impossible case of matrix_mdev
being NULL. A NULL kvm is handled gracefully by skipping only the
unregister call, and q->saved_isc = VFIO_AP_ISC_INVALID is set
unconditionally whenever saved_isc was not already invalid.
Additionally, add an else clause to the host-config check in
vfio_ap_mdev_remove_queue() to call vfio_ap_free_aqic_resources()
directly when the queue is not in the host's AP configuration. This
serves as a backstop: when the AP bus fires the driver .remove
callback after an adapter is removed from the host config, the queue
is by definition no longer addressable, so vfio_ap_mdev_reset_queue
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths
Fix 3 leaks in macb_alloc() error paths:
- Tx buffer allocated but crossing a 4G boundary: Tx leaked.
- Rx buffer allocation fails: Tx leaked.
- Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked.
This is because our error handling calls macb_free(bp) which in turn
frees the buffers stored in bp->queues[0], but nothing has been stored
in there. Fix by storing allocated buffers into bp->queues[0] ASAP. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path,
i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV
VM if its state is intra-host migrated. Alternatively, the mask could be
freed in sev_migrate_from() when "converting" the source VM, but that gets
annoying because ideally KVM would nullify the mask to guard against UAF,
and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y.
Freeing the mask during sev_migrate_from() is also not robust against other
KVM bugs, though that's kind of a moot point since any such bugs would show
up even if sev->active is never set. I.e. KVM must get that side of things
correct. But, that's not a great reason to add more code just to make
things marginally less robust. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl()
virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on
both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create()
error paths instead of dropping the reference it owns, so
obj->funcs->free() never runs and the virtio_gpu_object, the resource id
and the host-side resource are leaked.
Use drm_gem_object_put() instead. |
| An Allocation of Resources Without Limits or Throttling vulnerability in rpd, the routing protocol daemon, of Juniper Networks Junos OS and Junos OS Evolved platforms allows an unauthenticated adjacent attacker to cause a denial of service and heap memory corruption via OSPFv3 messages on an enabled broadcast interface. |
| A flaw has been found in DrayTek Vigor2960 1.5.1.6 Revision 8218. Affected by this issue is the function sub_182B0 of the file /cgi-bin/mainfunction.cgi of the component CGI Interface. This manipulation of the argument usefile/usescript/option causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was found in H3C Magic NX15 100R017. This issue affects the function sub_416874 of the file /usr/bin/usrlist. Performing a manipulation results in os command injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix object leak when drm_gem_handle_create() fails
virtio_gpu_gem_create() owns the reference taken by
virtio_gpu_object_create(). On the drm_gem_handle_create() error path it
calls drm_gem_object_release() instead of dropping that reference.
drm_gem_object_release() is the inverse of drm_gem_object_init() and does
not touch the reference count or call obj->funcs->free(), so it is only
correct as the last step of a destructor, as in
virtio_gpu_cleanup_object(). Using it here leaves the bo at refcount 1
with no remaining reference, so virtio_gpu_free_object() never runs and
the shmem pages, sg table and virtio_gpu_object are leaked. Since
virtio_gpu_object_create() has already set bo->created,
VIRTIO_GPU_CMD_RESOURCE_UNREF is not queued either, leaking the host-side
resource and the resource id.
drm_gem_handle_create_tail() drops the handle reference on all of its
internal error paths, so the caller only has to drop its own. Use
drm_gem_object_put(), matching the success path below. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Bound ownership depth through local kptrs and graph roots
Program-allocated objects can own other local objects through referenced
kptrs. bpf_obj_free_fields() follows those pointers through
__bpf_obj_drop_impl() synchronously, before the object storage is freed
through RCU. A self-referential local kptr type therefore permits arbitrarily
deep object chains, and dropping the head can exhaust the kernel stack.
Long acyclic type chains have the same problem.
btf_check_and_fixup_fields() still assumes referenced kptrs only point to
kernel types and checks ownership through list and rbtree roots only. Its
existing rule is sufficient for graph-only cycles: the target of each graph
edge must contain a node, so every type in a cycle has both a root and a
node. The rule rejects such a type owning another root, breaking every
cycle. It also limits graph-only chains to three types, or two if the first
type contains a node, and conservatively rejects longer acyclic chains.
The missing local-kptr edges, rather than a missed graph-only cycle, are the
bug introduced by support for bpf_kptr_xchg() into local kptrs.
Replace that restriction with one bounded ownership walk covering graph
roots and local referenced kptrs. Run it after all BTF records have been
fixed up, reject cycles and paths deeper than eight record-bearing types,
and cache each type's suffix depth while checking it against the remaining
budget. This also permits the longer acyclic graph-only layouts rejected
by the old rule; update their existing BTF tests accordingly.
Keep the bound independent of MAX_CALL_FRAMES because recursive destruction
can run below a BPF call chain. A plain local pointee without special-field
metadata adds only a final non-recursing drop. Non-owning kptrs and
kernel-BTF kptrs do not recurse through local records and remain outside the
walk. Include local percpu-kptr edges too, although allocation of percpu
objects with special fields is currently forbidden, so that relaxing that
restriction cannot bypass the ownership bound.
btf_check_and_fixup_fields() continues to initialize graph_root.value_rec,
including for separately allocated map records. The ownership relationships
belong to immutable program BTF and only need validation at BTF load time. |
| Gitea's Maven upload handler reads checksum uploads entirely into memory and returns before enforcing package-size quotas. An authenticated user with package-publish permission can submit an oversized body to a checksum endpoint despite legitimate checksum values being at most 128 bytes. This bypasses the upload quota on that path and can exhaust server memory. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: release mesh path quota on failed additions
Repeated failed or duplicate mesh path additions can exhaust
MESH_MAX_MPATHS while the path table holds fewer paths, which stops new
paths to reachable destinations from being created.
mesh_path_add() reserves a slot before allocating and inserting a path.
If allocation fails, the function returns without releasing the slot. If
the rhashtable insertion reports an error or an existing destination, the
function discards its candidate but retains the reservation. No new path
is installed in any of these cases.
Release the reservation whenever the candidate is not installed. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kionix-kx022a: Prevent memory leak and fix state
The driver allocates memory for samples at buffer enable path. If regmap
operation fails in the kx022a_fifo_enable() at the buffer enable path, the
allocated memory is never freed. Furthermore, the state information and
previous hardware configuration(s) aren't undone, potentially leaving
WMI interrupts and buffers enabled, or driver state flags wrong.
Free the memory and revert the hardware configuration and state flags on
error path. |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Core). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Outside In Technology. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| GraphQL-core is a Python port of the GraphQL.js reference implementation. From 3.2.3 until 3.2.12 and 3.3.0rc1, the parser's max_tokens limit in Parser.advance_lexer counts only non-comment tokens returned after Lexer.lookahead skips comments. Each skipped comment is still allocated as a Token and retained through token.next and token.prev, allowing a highly compressible comment-padded GraphQL document to pass a low token limit while consuming memory. An unauthenticated remote attacker can exhaust worker memory before AST-based depth or complexity controls run. This issue is fixed in versions 3.2.12 and 3.3.0rc1. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix dynamic id driver deregistration race
Only free the dynamic ids after having deregistered the driver and
removed the "new_id" attribute to avoid leaking any id added by a racing
write to the attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: account proxy paths against the mesh path limit
Proxy-path churn can drive the interface path counter negative and let
later mesh path additions exceed MESH_MAX_MPATHS.
mesh_path_free_rcu() decrements the interface mpaths counter for entries
from both the mesh and proxy path tables, but mpp_path_add() never
reserves a slot in that counter. Removing or expiring a proxy path
therefore returns a slot that was never charged.
mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once
it falls below the number of installed paths the limit no longer holds.
Reserve the shared quota before allocating a proxy path and release it on
every unsuccessful addition. Mesh and proxy paths now share one
1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
