| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: restore RX state on reload failure
lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before
reallocating the RX resources for the new MTU. If the allocation fails,
the restore path puts these fields back before restarting RX.
However, the reload path also updates rx->page_order and rx->max_mtu
before calling lan966x_fdma_rx_alloc(). These fields are not restored on
failure, so RX can be restarted with the old pages, old FDMA state and
old page pool, but with the page geometry from the failed new MTU.
This can make the XDP path advertise a frame size derived from the new
page_order while the actual RX pages still come from the old allocation.
For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be
called with a frame size larger than the restored RX pages.
lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page
pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If
fdma_alloc_coherent() fails, the new page pool is destroyed, but the
rollback path does not restore the per-port XDP RXQ mem model
registration either.
Save and restore rx->page_order and rx->max_mtu, and restore the old page
pool registration for each port's XDP RXQ before RX is started again.
This keeps the restored RX state consistent after a failed reload. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode()
After seeing the patch [1] to guard is_in_v2_mode() with RCU, it makes
me realize that is_in_v2_mode() may be called in a context where a new
cgroup filesystem is being rebound with stale cpuset_cgrp_subsys.root
pointer. Avoid this potential UaF situation by adding a new cpuset_v2_mode
flag which is set when the cpuset_v2_mode mount option is used. This
flag is written into only when cpuset_bind() is being called with a
stable cpuset_cgrp_subsys.root value. The is_in_v2_mode() helper is
modified to read the new cpuset_v2_mode flag instead of accessing
cpuset_cgrp_subsys.root directly.
[1] https://lore.kernel.org/lkml/20260929084124.626693-2-arighi@nvidia.com |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: unlock inode and extent in caller when io_uring read extent fails
btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken
the inode shared lock and the extent lock. On failure it used to unlock
in out_fail, and a pages-array allocation failure returned -ENOMEM
without unlocking at all.
Unlock in the caller instead on all failure returns, matching the
copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks
in btrfs_uring_read_finished(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: use vb2_video_unregister_device on driver removal
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: reset ar->num_stations on hardware start
When (multiple) hw restart occurs, we end up in a situation where we
cannot accept new stations / mesh peers. This seems to be the
'num_stations' in 'struct ath11k' that did not get reset properly in
this case. In ath11k_mac_op_start(), it was indeed the only accounting var
that did not get reset so let's clear it too.
This avoids problems like those:
[1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0
[1248828.088115] Call trace:
[1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P)
[1248828.088119] ieee80211_reconfig+0x774/0x1438
[1248828.088123] ieee80211_restart_work+0x10c/0x178
[1248828.088127] process_one_work+0x178/0x3c0
[1248828.088130] worker_thread+0x280/0x440
[1248828.088133] kthread+0xe0/0xf8
[1248828.088137] ret_from_fork+0x10/0x20
[1248828.088141] ---[ end trace 0000000000000000 ]---
[1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128)
[1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 |
| IBM MQ could allow an authenticated attacker to cause a denial of service through a specially crafted message that triggers excessive memory operations during character set conversion. |
| BuildAdmin through 2.3.9 contains an insecure direct object reference vulnerability that allows authenticated backend administrators to modify other administrators' profiles via the id parameter. Attackers holding the routine/adminInfo/edit permission can overwrite avatar, nickname, email, mobile and motto fields, including a super administrator's email and mobile. |
| Incus before 6.0.7, 6.1.0 before 7.0.2, and 7.1.0 before 7.5.0 contains a missing authorization vulnerability in GET /1.0/operations/{uuid} that lets project-restricted clients read operations in other projects. Attackers holding a restricted certificate and a known operation UUID can retrieve command lines, environment secrets, websocket secrets, and trust enrolment tokens. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix self-redirect copied_seq double-counting
When a BPF stream_verdict program redirects an skb back to the same
socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply()
calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the
skb is then delivered to the socket's psock ingress queue and later
read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via
the copied_from_self accounting path. This double-counting causes
copied_seq to advance by 2x the actual data length, triggering:
TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \
rcvnxt BF2E806, fl 0
WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640
Call Trace:
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806
WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0
Call Trace:
tcp_recvmsg_locked+0x8d1/0x2640
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by converting self-redirect verdict to __SK_PASS at the
beginning of sk_psock_verdict_apply(). This bypasses the
__SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting
the __SK_PASS path queue the skb to the psock ingress queue. The
data is then read via tcp_bpf_recvmsg_parser(), which advances
copied_seq exactly once through copied_from_self. Cross-socket
redirects continue through __SK_REDIRECT with sk_psock_eat_skb()
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix IRQ injection with SIGP Stop and Store Status
When __inject_sigp_stop() is called for a Stop and Store Status
operation, if the vCPU is running, the interrupt is marked as pending
and the status is stored by the thread performing the KVM_RUN IOCTL.
If the vCPU is already stopped, the status is stored immediately.
Storing the status means writing into userspace, which might fault, and
__inject_sigp_stop() is called from do_inject_vcpu() which in turn is
always called holding a spinlock, which is obviously an issue.
Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and
adding a bool flag to indicate whether a store status is needed. The
callers of do_inject_vcpu() are modified to pass the pointer to the
bool flag; whenever a Store Status operation is needed, the callers can
now perform it outside the spinlock.
Opportunistically refactor kvm_s390_set_irq_state() to use
scoped_guard() and __free().
[ Added Fixes tag while picking -- Claudio ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Drop unnecessary PMD page copy when freeing
On a box with a discrete GPU, lockdep reports a possible deadlock as
soon as kswapd shrinks the TTM page pool. The immediate cause is an
x86 commit that added an mmap_read_lock() to kernel page protection
munging code.
The huge vmap code holds the same lock over a GFP_KERNEL allocation,
which is a no-no now that reclaim can take it. That allocation is in a
page table *free* path and ends up being for dubious purposes[1].
Basically, it tries to avoid hardware setting Accessed=1 in page table
entries that are unreachable by the hardware, a non-issue.
Remove the PMD copy. Detach the original PMD page at the PUD, flush
the mid-level caches, and free the PTE tables straight from the
detached PMD page. With no allocation left, the locking issue is gone.
Lockdep splat/analysis:
WARNING: possible circular locking dependency detected
7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U
------------------------------------------------------
kswapd0/269 is trying to acquire lock:
((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0
but task is already holding lock:
(pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm]
Chain exists of:
(init_mm).mmap_lock --> fs_reclaim --> pool_shrink_rwsem
The cycle is built from three edges:
1) pool_shrink_rwsem -> (init_mm).mmap_lock
The TTM shrinker restores the caching attribute of every page it
frees, while holding pool_shrink_rwsem:
ttm_pool_shrink()
-> ttm_pool_dispose_list()
-> ttm_pool_free_page()
-> set_pages_wb()
-> change_page_attr_set_clr() [ init_mm mmap read lock ]
2) fs_reclaim -> pool_shrink_rwsem
The same shrinker, called from reclaim.
3) (init_mm).mmap_lock -> fs_reclaim
ioremap() installing a huge PUD mapping over an existing PMD table:
ioremap_page_range()
-> vmap_range_noflush()
-> vmap_try_huge_pud() [ init_mm mmap read lock ]
-> pud_free_pmd_page()
-> __get_free_page(GFP_KERNEL) [ enters reclaim ]
[ dhansen: Lots of changelog munging/trimming and merged comments from my
version of the fix. ] |
| SiteServer SSCMS through 7.4.0 contains an authorization bypass vulnerability in ChannelsController that allows site-scoped administrators to access other sites' channels by supplying foreign channel IDs. Attackers with Channels permission on one site can read and overwrite another site's channel names, file paths, templates, link URLs, and custom fields, breaking multi-site isolation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: cap ATOM command table nesting depth
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.0, multiple ixml DOM traversal functions process deeply nested XML with unbounded recursion. The iterative XML parser accepts the document, but ixmlPrintDomTreeRecursive in ixml/src/ixml.c and ixmlNode_getElementsByTagNameRecursive, ixmlNode_getElementsByTagNameNSRecursive, ixmlNode_cloneNodeTreeRecursive, and ixmlNode_isAncestor in ixml/src/node.c recurse over firstChild and nextSibling links. An unauthenticated peer on the local network can supply deeply nested XML through a SOAP request, exhaust a service thread's stack, and crash the UPnP service. This is an incomplete-fix case for CVE-2021-28302 because its remediation converted ixmlNode_free but left these traversal paths recursive. This issue is fixed in 2.0.0. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions 0.9rc2 and below, avahi-daemon can be crashed via a segmentation fault by sending an unsolicited mDNS response containing a recursive CNAME record, where the alias and canonical name point to the same domain (e.g., "h.local" as a CNAME for "h.local"). This causes unbounded recursion in the lookup_handle_cname function, leading to stack exhaustion. The vulnerability affects record browsers where AVAHI_LOOKUP_USE_MULTICAST is set explicitly, which includes record browsers created by resolvers used by nss-mdns. This issue is patched in commit 78eab31128479f06e30beb8c1cbf99dd921e2524, which is part of version 0.9-rc3. |
| The FluentCart A New Era of eCommerce – Faster, Lighter, and Simpler plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.7.0 via the 'order_id + billing_address_id (also shipping_address_id)' parameter due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to read and exfiltrate another customer's stored billing and shipping address PII — including street address, city, state, postcode, phone number, company name, VAT number, and legal registration ID — by enumerating sequential AUTO_INCREMENT order and address ID pairs. The id-equality guard intended to restrict address reuse is bypassed because the attacker controls both halves of the compared pair, and the unauthenticated AJAX entry point imposes only a soft rate limit of 5 requests per 60 seconds rather than any authentication or ownership check. |
| In Splunk Enterprise versions below 10.4.4, a user that holds a role with the preview_data_management_pipeline capability or edit_data_management_pipeline_job capability could read or delete Data Management SPL2 preview jobs and results outside their ownership scope.
The vulnerability is possible because the Data Management Representational State Transfer (REST) API verifies the required capability but does not verify that the requested preview job belongs to the requester.
The affected Data Management REST API is available only when the Edge Processor feature is turned on. The Edge Processor feature is turned off by default.
For more information see Set up a data management control plane (https://help.splunk.com/en/splunk-enterprise/process-data-at-the-edge/use-edge-processors-for-splunk-enterprise/10.4/getting-started/set-up-a-data-management-control-plane) and Getting sample data for previewing data transformations (https://help.splunk.com/en/splunk-enterprise/process-data-at-the-edge/use-edge-processors-for-splunk-enterprise/10.4/working-with-pipelines/getting-sample-data-for-previewing-data-transformations) in the Splunk documentation. |
| OpenBao before 2.6.4 and 2.7.x before 2.7.1 does not verify, when renewing a token issued by the Kubernetes Auth method, that the service account token originally used to authenticate is still valid. An authenticated attacker can keep renewing such tokens to persist access after the Kubernetes service account has been deleted. |
| Lotus through 0.10.2 contains an insecure direct object reference vulnerability in SubscriptionViewSet.get_object() that uses an unscoped queryset without organization filtering or permission checks. Authenticated users or API keys from any organization can supply another organization's subscription_id to read, cancel, update, switch plans, or modify addons, altering another tenant's billing. |
| Netmaker through 1.7.0 contains an authorization bypass vulnerability in the updateExtClient handler that allows network-scoped users to modify external clients on other networks. Attackers with external client permissions on one network can send PUT requests to /api/extclients/{network}/{clientid} to replace public keys, disable clients, and obtain WireGuard private keys. |
