| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows VHD miniport driver allows an authorized attacker to elevate privileges locally. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JGSS). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JGSS). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N). |
| Use after free in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check the mounts before reading their parents in pivot_root()
path_pivot_root() reads the parents of new_root and of the caller's root
and checks whether they are shared before it checks that either mount is
in the caller's mount namespace. Only namespace_sem is held. That's fine
for a mount that is in the caller's mount namespace.
But new_root can be a file descriptor to a mount that has been unmounted
and that only the file descriptor keeps alive. If that mount stayed
attached to its parent when it was unmounted nothing pins the parent for
it. The final mntput() of the parent unhooks the children under
mount_lock alone and frees the parent afterwards:
pivot_root() close(fd), last ref on the parent
------------ ---------------------------------
ex_parent = new_mnt->mnt_parent
mntput_no_expire_slowpath()
__umount_mnt(new_mnt)
cleanup_mnt()
call_rcu()
IS_MNT_SHARED(ex_parent)
BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840
Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157
path_pivot_root+0xf1a/0x1840
__x64_sys_pivot_root+0x165/0x190
The same goes for the caller's root via chroot(). Both outcomes of the
check end in EINVAL so nothing but the read itself goes wrong. It's the
same thing commit bb4609405752 ("statmount: read the parent of an
unmounted mount under mount_lock") fixed for statmount().
Check that both mounts are in the caller's namespace before their
parents are read. Every path returns EINVAL either way. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: core: wait for request completion before freeing card
In memstick_alloc_card() and memstick_set_rw_addr(),
wait_for_completion_timeout() is used to wait for device identification
and address configuration requests to complete.
The memstick subsystem does not provide an abort or cancellation
callback in struct memstick_host for in-flight requests. If
wait_for_completion_timeout() expires (for instance, when a USB transfer
or command retry is delayed), memstick_alloc_card() returns an error and
frees the memstick_dev structure via kfree(card).
However, the host controller driver (such as rtsx_usb_ms) is still
running the request asynchronously in worker context. When the transfer
eventually finishes, the driver writes into host->req->data, which
points to memory inside the already freed card structure. This leads to
a KASAN slab-use-after-free write:
BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990
Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239
Workqueue: events rtsx_usb_ms_handle_req
Call Trace:
ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450
rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline]
rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560
kthread+0x373/0x450 kernel/kthread.c:436
Allocated by task 1662:
memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline]
memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Freed by task 1662:
kfree+0x20c/0x650 mm/slub.c:6792
memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline]
memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already
implement their own hardware and bus timeouts, and callers in
mspro_block and ms_block already rely on wait_for_completion()
unconditionally.
Replace wait_for_completion_timeout() with wait_for_completion() in
memstick_set_rw_addr() and memstick_alloc_card() so that the card
structure is never freed while an asynchronous request is in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix metadata_dst refcount handling on representor teardown
ice_eswitch_release_repr() uses metadata_dst_free() to release the
representor's metadata_dst. metadata_dst_free() directly frees the
underlying memory without checking the dst_entry refcount.
When ice_eswitch_port_start_xmit() processes a packet, it takes a
reference via dst_hold() and attaches the metadata_dst to the skb.
If the representor is torn down while packets are still queued on
the lower device (e.g. in a qdisc), the metadata_dst is freed while
references are still held.
Use dst_release() instead, which correctly decrements the refcount
and only frees the object when all references are dropped. The dst
subsystem already handles metadata_dst cleanup in dst_destroy() when
DST_METADATA is set.
Other drivers sharing this pattern (nfp, airoha, bnxt) already use
dst_release() for their metadata_dst lifecycle. |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving `first` dangling. A following IA in the same packet allocates a new lease and copies `first->key`, producing a 16-byte heap-use-after-free read. ASan confirms the UAF; native tracing shows the packet shape can deterministically reclaim the freed lease as the destination allocation, producing a zeroed Reconfigure key copy. The validated impact is unauthenticated adjacent-network denial of service and DHCPv6 Reconfigure/ForceRenew key confusion. Arbitrary PC control is not proven for this UAF alone. This issue has been patched in version 25.12. |
| The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an operand of virt >> 12. That operand encodes the ASID in bits [63:48], so the invalidation only ever matched ASID 0 (the kernel page tables) and global entries. Memory domains, however, are allocated ASIDs starting at 1 in arch_mem_domain_init(), and every domain-private leaf created by private_map() is mapped with MT_NG, i.e. non-global. A domain's cached translation therefore survived the invalidation.
All callers of invalidate_tlb_page() are demand-paging paths. When the eviction algorithm reclaims a frame, page_frame_prepare_locked() in kernel/mmu.c calls arch_mem_page_out(), which marks the kernel leaf invalid, propagates the invalid descriptor into every domain via sync_domains(), and then flushes only ASID 0. do_page_fault() immediately reuses the very same page frame for the incoming mapping through arch_mem_page_in(). A user thread that had already touched the evicted page — a k_mem_partition added with arch_mem_domain_partition_add(), or its own stack mapped by map_thread_stack() — retains a valid EL0 read/write translation to that physical frame under its own ASID.
Unprivileged code running in a user thread can drive memory pressure to force eviction and then keep accessing the stale address, obtaining read and write access to whatever the kernel subsequently placed in that frame: supervisor data, another memory domain's partition, or another thread's stack. This defeats the isolation that CONFIG_USERSPACE is meant to enforce, allowing information disclosure and memory corruption up to full compromise of the system.
The fix switches the implementation to TLBI VAAE1{IS}, which matches every ASID and both global and non-global entries, so no domain-tagged translation survives a page out, dirty-bit update or access-flag clear. Exploitation requires an arm64 build with both CONFIG_USERSPACE and CONFIG_DEMAND_PAGING enabled, an active backing store, and at least one demand-paged page that is also privately mapped into a user memory domain. The same commit additionally stops globalize_table() from stripping EL0 permission and non-global attributes off domain-private leaves during paging synchronization, which previously caused user threads to lose access to their own partitions and stacks. |
| The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return.
Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice.
The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient.
Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected. |
| Apache Traffic Server's experimental wasm plugin has a use-after-free in its transaction-close handler and forwards unvalidated guest-supplied metric IDs to the internal stats API.
This issue affects Apache Traffic Server: from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 10.1.5 or 10.2.1, which fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: hub: use shorter 120ms post resume hold for SS root hubs
Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers
an AMD platform issue. Users running Android adb report crashes after
adb has been polling and waking up the USB subsystem once a second for
some time. Vendors are working on a solution. Disabling USB runtime PM
is one way to prevent this issue, but it is also proven that reducing the
hold time to 120ms in resume also mitigates it. See Link for more
details.
Reducing the hold time to 120ms for the USB3 roothub is in itself a valid
change and optimization, as the current 200ms is excessive: a root hub
has no upstream suspended hub whose wake propagation needs to be
accounted for, but still need some time for USB3 link training to
complete.
Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c
("usb: hub: fix detection of high tier USB3 devices behind suspended
hubs") is intended for. |
| In the Linux kernel, the following vulnerability has been resolved:
unshare: don't drop active namespace references that were never taken
Active references on the namespaces of an nsproxy are taken when the
nsproxy is installed into a task in switch_task_namespaces() and
copy_namespaces() and dropped again by put_nsproxy() through
deactivate_nsproxy().
But ksys_unshare() calls put_nsproxy() on an nsproxy that was never
installed when set_cred_ucounts() fails. The new namespaces of that
nsproxy go from zero to minus one and the namespaces shared with the
caller lose a reference that belongs to the nsproxy the caller keeps
using:
WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230
nsproxy_ns_active_put
deactivate_nsproxy
ksys_unshare
Afterwards the namespaces the caller lives in aren't listed by listns()
anymore. set_cred_ucounts() only fails when alloc_ucounts() can't
allocate and it only allocates when the real uid of the caller differs
from its effective uid.
Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify
create_new_namespaces()") separated the two cases on purpose.
nsproxy_free() frees an nsproxy that was prepared but never installed
and that's what a failed setns() uses in put_nsset(). Export it and use
it for a failed unshare() as well. |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix P2P device removal race in brcmf_detach()
When the driver is removed while the user space process that created
the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device
interface is removed twice and the kernel crashes.
The two paths are:
- wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P
device. nl80211_del_interface() holds RTNL and the wiphy mutex and
calls brcmf_p2p_del_vif(), which disables discovery and waits up to
1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(),
which unregisters the wdev and frees the vif and the ifp.
- brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives,
and calls brcmf_remove_interface(ifp, false) for the same ifp.
brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on
rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls
cfg80211_unregister_wdev() on the wdev that was already unregistered
and freed.
The second list_del_rcu() of wdev->list faults on LIST_POISON2:
brcmfmac: brcmf_p2p_del_vif delete P2P vif
brcmfmac: brcmf_p2p_deinit_discovery enter
brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared
brcmfmac: brcmf_detach Enter
brcmfmac: brcmf_bus_change_state 1 -> 0
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
[1.5 s later, brcmf_p2p_del_vif() timed out]
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
Unable to handle kernel paging request at virtual address dead000000000122
Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP
pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
Call trace:
_cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
cfg80211_unregister_wdev+0x10/0x1c [cfg80211]
brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac]
brcmf_remove_interface+0x1f4/0x254 [brcmfmac]
brcmf_detach+0x88/0x180 [brcmfmac]
brcmf_sdio_remove+0x90/0x7b0 [brcmfmac]
brcmf_sdiod_remove+0x20/0xa0 [brcmfmac]
brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac]
sdio_bus_remove+0x38/0x144
device_release_driver_internal+0x1e8/0x2c0
device_release_driver+0x14/0x20
brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac]
brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac]
__exit_compat+0x18/0x418 [brcmfmac_cyw]
__arm64_sys_delete_module+0x1ac/0x244
The log was taken with debug=0x406 on an i.MX 8M Plus board with a
CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of
brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same
in mainline.
To reproduce:
1. Start wpa_supplicant on wlan0 and let it associate. It creates the
P2P device (iw dev shows "type P2P-device").
2. Stop wpa_supplicant and remove the driver without waiting for
wpa_supplicant to exit:
kill $(pidof wpa_supplicant)
rmmod brcmfmac_cyw brcmfmac
The crash is reproducible on that board.
For the interface without a netdev (the P2P device), take RTNL and the
wiphy mutex in brcmf_detach() before reading iflist, and remove it with
locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the
slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev
any more. The interfaces with a netdev are removed as before, because
brcmf_del_if() takes RTNL on its own for the primary interface. |
| Use after free in SQL Server allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
statmount: read the parent of an unmounted mount under mount_lock
statmount_mnt_basic() reads the ids of the parent through m->mnt_parent
with namespace_sem held for reading. That's fine for a mount that is
in a namespace. Everything above it is pinned by that namespace.
STATMOUNT_BY_FD also accepts a file descriptor on a mount that has
been unmounted on purpose and that only the file descriptor keeps alive.
If that mount stayed attached to its parent when it was unmounted the
parent is unmounted as well and nothing pins it for the child.
The final mntput() unmounts the children under mount_lock alone and
frees the parent afterwards. Concurrently, statmount_mnt_basic() reads
m->mnt_parent twice while that can happen and can easily dereference a
mount that's already gone.
Read the parent of an unmounted mount under mount_lock. The parent
can't be put while it is held and both ids come from the same mount. A
mounted mount's parent is pinned by the namespace and a mount can't
leave its namespace while namespace_sem is held, so the common case
takes no global lock. |
| Use after free in WebAppInstalls in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in ANGLE in Google Chrome on on Windows prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
