Export limit exceeded: 36384 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (3031 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-56727 | 1 Zammad | 1 Zammad | 2026-09-26 | N/A |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.2, summary In Zammad's inbound PGP email processing, the return value of the gpg verification call was silently discarded. Regardless of whether gpg reported a valid, invalid, or missing signature, the handler unconditionally wrote sign: { success: true, comment: "Good signature" } to the article's security preferences. Impact Any sender could tamper with the body of a multipart/signed PGP email, or craft a message with an entirely fabricated or mismatched signature, and Zammad would display it to the recipient as cryptographically verified with a "Good signature" label. Users and agents relying on Zammad's signature indicator to confirm message authenticity and integrity would be misled into trusting modified or forged content. The vulnerability affects all inbound PGP-signed emails processed while the PGP integration is enabled. This issue is fixed in version 7.0.2. | ||||
| CVE-2026-73064 | 1 Trustedfirmware | 1 Mbed Tls | 2026-09-26 | 2.9 Low |
| In Mbed TLS 3.2.0 though 3.6.6 and 4.0.0 through 4.1.0, an attacker who can cause an entropy source to fail can remove or inject bytes into the start of the TLS stream. This only affects TLS 1.3 servers. | ||||
| CVE-2026-93209 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log shows the HCI Read Local Version command was sent and the firmware replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG), but the waiter in __hci_cmd_sync_sk() never woke up and timed out after 10 s: bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add bluetooth hci0: skb len 4 // hci_cmd_sync_alloc bluetooth hci0: length 1 // hci_req_sync_run Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work Bluetooth: hci0 type 1 len 4 // hci_send_frame Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete <-- req_skb NULL: req_complete_skb not set, hci_cmd_sync_complete() never called, req_status stays HCI_REQ_PEND --> <-- 10 s later: wait_event_interruptible_timeout expires --> bluetooth hci0: end: err -110 // __hci_cmd_sync_sk The root cause is that hci_send_cmd_sync() clones the sent command into hdev->req_skb so that hci_req_cmd_complete() can locate the registered completion callback. Under memory pressure this skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply is received and processed, but hci_req_cmd_complete() finds NULL req_skb, so hci_cmd_sync_complete() is never called, req_status stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT. req_skb is only used to read bt_cb(skb)->hci callbacks and opcode -- it is never modified. Replace skb_clone() with skb_get(), which simply increments the reference count of hdev->sent_cmd without allocating new memory and therefore cannot fail. This issue was first observed as a use-after-free in ttyport_close() when ttyport_open() failed, which was investigated in an earlier patch series [1]. That investigation led to the discovery of the true root cause described above. [1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/ | ||||
| CVE-2026-97902 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: don't return -EINVAL for successful nested thaw Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices") replaced the freeze_holders bitmask with per-holder counters to allow nested freezes. In the bitmask version, a thaw that released a shared hold while another holder remained returned 0. Since the rework, thaw_super_locked() drops the freeze reference via freeze_dec() but then returns -EINVAL when other freezers remain, misinforming the caller: the thaw did succeed, the superblock just stays frozen for the remaining holders. This breaks bdev-initiated freezing. When a filesystem is frozen with FIFREEZE and additionally frozen via bdev_freeze() -- which nests by design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives -EINVAL from the holder op although its freeze reference was dropped, and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances the count. After the user's FITHAW and umount, the block device can never be mounted again: dm-1: Can't mount, blockdev is frozen There is no way for userspace to drop the leaked count; only destroying the block device (or a reboot) recovers the device. Reproducer (any kernel since v6.8): dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0" mkfs.ext4 /dev/mapper/dut mount /dev/mapper/dut /mnt fsfreeze --freeze /mnt # freeze_ucount == 1 dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2 dmsetup resume dut # ucount 2 -> 1, but thaw_super() # returns -EINVAL, so bdev_thaw() # keeps bd_fsfreeze_count at 1 fsfreeze --unfreeze /mnt # filesystem thaws fine umount /mnt mount /dev/mapper/dut /mnt # EBUSY, forever The same happens with fsfreeze held across an LVM snapshot of the origin volume. fs_bdev_thaw()'s documentation already describes the intended semantics: "If this function returns zero it doesn't mean that the filesystem is unfrozen as it may have been frozen multiple times". Restore them by returning 0 when a nested thaw drops its hold while other freezers remain. Thawing without holding a freeze still fails with -EINVAL as may_unfreeze() rejects that case before the reference count is touched. | ||||
| CVE-2026-97589 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix wrong return code to engine in asynch callbacks When crypto_finalize_hash_request() or crypto_finalize_skcipher_request() explicitly completes a request, the do_one_request callback must return 0 to indicate successful handling. Returning a negative error code causes the crypto engine to assume the driver failed to take ownership and triggers a second completion via crypto_request_complete(), resulting in a double completion. This pattern occurs in paes_s390.c 4 times and once in phmac_s390.c. Fixed in phmac_do_one_request() and all four paes do_one_request callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit finalization instead of propagating the error code. | ||||
| CVE-2026-97588 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly When hardware persistently returns -EBUSY after exhausting retries, the error propagates to crypto_finalize_*_request(). The crypto API's completion wrapper treats -EBUSY as a queueing status and swallows it, preventing the completion callback from firing. This causes callers using crypto_wait_req() to block indefinitely. Translate persistent -EBUSY to -EIO after retry exhaustion to ensure proper error propagation and callback invocation. | ||||
| CVE-2026-98144 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: put the chained BO when its mapping fails amdxdna_cmd_set_error() looks up the first BO of a command chain, which takes a reference, and drops it at the end of the function. The mapping of that BO is established in between, and the failure path returns without the put, so the reference is leaked. Ordinary use does not reach it. The chain has been submitted before any of this runs, so aie2_cmdlist_fill_slot() has already called amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its address. What makes it reachable is that the BO is resolved again by handle here, and the handle is userspace's to recycle: closing it after submission and importing a dma-buf whose exporter implements no vmap onto the same id leaves amdxdna_gem_get_obj() returning an object this cannot map, since prime_import() types every import AMDXDNA_BO_SHARE. | ||||
| CVE-2026-93233 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: fix callocated underflow on large folio split nouveau_dmem_folio_free() drops chunk->callocated once per freed folio, while a large (compound) device-private folio is only counted once when it is allocated. When such a folio is split, the mm core invokes ->folio_split() (nouveau_dmem_folio_split()) once for each new sub-folio, but the hook only fixes up the sub-folio metadata and leaves chunk->callocated unchanged. Each resulting sub-folio is later freed separately, so after a split the single allocation (+1) is met by N frees (-N), leaving chunk->callocated short by N-1. On the first split/free cycle it underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter wraps and never returns to zero, so the chunk can no longer be reclaimed (nouveau_dmem_fini() also warns on the leaked count). Account for the new sub-folio in the split hook, under the same lock as nouveau_dmem_folio_free(), so the count stays balanced. | ||||
| CVE-2026-93241 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memcg: bypass the reclaim and oom killer for dying tasks once oom_reaper is done At Meta, we are seeing instances where an OOM killed job is stuck in the exit path for several hours. In one particular case, the job was stuck for more than 8 hours and I had to manually remove the memory.max limits to allow the process to exit. The job was a single process job and had ~55 GiB memory.max and zswap enabled. It had almost 0 anon in memory and ~111 GiB in zswap compressed to ~51 GiB zswap pool (i.e. almost all of memory.current was zswap). Nothing was left on the LRUs to reclaim. On further inspection, I observed ~20k threads of that process stuck with the following stack: [<0>] mem_cgroup_out_of_memory+0x4e/0xa0 [<0>] charge_memcg+0x8bf/0x990 [<0>] mem_cgroup_swapin_charge_folio+0x4e/0x80 [<0>] __read_swap_cache_async+0x10c/0x260 [<0>] swapin_readahead+0x116/0x3f0 [<0>] do_swap_page+0x13c/0x1ce0 [<0>] handle_mm_fault+0x61d/0x11f0 [<0>] do_user_addr_fault+0x3e7/0x6d0 [<0>] exc_page_fault+0x8f/0x110 [<0>] asm_exc_page_fault+0x22/0x30 [<0>] __get_user_8+0x14/0x20 [<0>] futex_cleanup+0x27/0x1c0 [<0>] futex_exit_release+0x47/0x60 [<0>] do_exit+0x107/0x940 [<0>] do_group_exit+0x81/0xa0 [<0>] get_signal+0x2b1/0x6e0 [<0>] arch_do_signal_or_restart+0x1a/0x1c0 [<0>] exit_to_user_mode_loop+0xa8/0x1c0 [<0>] do_syscall_64+0x152/0x250 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 In addition the dmesg was filled with "Out of memory and no killable processes..." messages. I have no idea why oom reaper was not able to reap/unmap the process. My guess is that since oom reaper tries to acquire mmap_lock in read mode limited number of times and then gives up, there might be a thread of that process which had mmap_lock in write mode at that time. My initial suspicion was the futex_cleanup and kernel page fault causing infinite fault and charge retries but that was put to rest in previous discussions happened on similar problem [1]. My current theory is that it is just a simple slow serialization behind the oom_lock. Unlike page allocator, memcg charge code takes the oom_lock without the "try". Though memcg oom code uses mutex_lock_killable(), note that in the call stack get_signal() consumes SIGKILL (or sigdelset(SIGKILL)) before calling do_group_exit(). So this mutex_lock_killable() is just a mutex_lock() here. Therefore 10s of thousands of threads are waiting on oom_lock and one by one they get -EFAULT from get_user() in the futex cleanup code and bails out. Discussion from [1] led to commit a75ffa26122b ("memcg, oom: do not bypass oom killer for dying tasks") which routes dying tasks into the OOM path precisely so the oom_reaper can reap their mm and free the memory asynchronously. But the reaper is best-effort and one-shot: if it cannot take mmap_lock for read (e.g. a sibling thread holds it for write) it sets MMF_OOM_SKIP and never retries, leaving only the glacial oom_lock-serialized synchronous drain. Once MMF_OOM_SKIP is set there is no more asynchronous reclaim coming for the mm, so a dying task charging against it has nothing left to wait for: it frees its memory only once it finishes exiting. Running reclaim and the (no-victim) OOM killer for it is then pointless, and doing it for 10s of thousands of exiting threads is what serializes them behind oom_lock. So before reclaim, if current is an OOM victim whose reaper is done, fail the charge. Reproduced with 20k threads, each parking a robust futex head on its own zswapped page, OOM-group-killed while a sibling holds mmap_lock for write so the reaper gives up and sets MMF_OOM_SKIP. Tested on next-20260728 and baseline show ~90 seconds exit time while with the patch the exit time reduced to ~3 seconds. | ||||
| CVE-2026-93219 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/timer-sun4i: Advertise a real minimum delta sun4i_clkevt_next_event() compensates for the timer stop/start synchronization delay by programming evt - TIMER_SYNC_TICKS into the hardware interval register. The clockevent device currently advertises TIMER_SYNC_TICKS as min_delta_ticks, so the clockevents core is allowed to call set_next_event() with evt == TIMER_SYNC_TICKS. That programs a zero-tick interval. With oneshot/highres/nohz timer operation this can leave the next event stuck, which was observed as a boot hang on Allwinner D1 after the clockevents core started reusing forced minimum-delta events. Advertise one extra tick instead, so the smallest event accepted by the core still programs at least one hardware tick after the synchronization compensation. | ||||
| CVE-2026-93258 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: do not use make_bad_inode() in ocfs2_read_inode_block_full() This reverts commit 58b6fcd2ab34 ("ocfs2: mark inode bad upon validation failure during read"). Since 'make_bad_inode()' resets inode type to S_IFREG, doing this for directory inode during active VFS lookup is likely to confuse the latter, including VFS_BUG_ON_INODE() triggered in this case. | ||||
| CVE-2026-90064 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Reject page faults from non-fault-mode scratch VMs Having scratch enabled does not make a VM capable of handling recoverable page faults. Allowing scratch VMs through the ASID lookup also admits dma-fence mode VMs. If such a VM faults on an already valid VMA, the handler reports success without fixing the fault, causing the GPU to retry indefinitely. Only allow fault-mode VMs through the ASID lookup. Fault-mode VMs using scratch remain supported, while faults from 3D VMs are rejected. (cherry picked from commit bfb24a06405b652d37831f3fb66b71d33a6605de) | ||||
| CVE-2026-90058 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup qdisc_get_stab() accepts a user-supplied size table, and __qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the overhead, the size-table data (u16), and size_log (up to STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len() to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as DRR and ETS replenish one quantum per loop iteration; with a tiny quantum (1) they spin billions of times under the qdisc lock, producing a soft lockup / RCU stall as illustrated by vega@nebusec.ai. Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table amplification cannot drive deficit schedulers into an unbounded loop. A legitimate size table (e.g. qfq's overhead 999999999, which is handled by dropping) is still accepted. Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above any legitimate single-skb wire length: the largest current skb->len is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax) amplifies that to ~578 KB, both comfortably below 1 MiB. At the same time, 1 MiB bounds the deficit refill loop to ~1M iterations per packet with quantum=1, which completes in a few milliseconds well under the demonstrated softlockup threshold (~10^9 iterations). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y). - Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]). - Add a class with a tiny quantum of 1 and send one small packet; the deficit loop spins billions of times under the qdisc lock and trips the softlockup detector (panic with kernel.softlockup_panic=1). - Reachable as root or from an unprivileged user in a fresh user+net namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN. | ||||
| CVE-2026-93111 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark tracing_multi trampolines as ftrace managed Since tracing_multi link does not set ftrace_managed, it would fail to release the tracing_multi link when attaching tracing_multi link and then attaching fentry link. [ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97 ... [ 3.733170] bpf_tracing_multi_link_release+0x14/0x30 [ 3.733890] bpf_link_free+0x58/0x130 [ 3.734414] bpf_link_release+0x23/0x30 Fix it by setting 'ftrace_managed = true' in register_fentry_multi(). | ||||
| CVE-2026-92504 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int3400: clean up ODVP on probe failures evaluate_odvp() creates per-ODVP sysfs files before the thermal zone and later probe resources are registered. The current unwind path only calls cleanup_odvp() from the late sysfs failure path, so failures after evaluate_odvp() but before that label, including thermal_tripless_zone_device_register() failures, leave the ODVP files and storage behind. Move the ODVP cleanup to the common ART/TRT unwind path so every failure after evaluate_odvp() releases the ODVP state. Also clear the cached ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call it for partial setup failures while probe continues. | ||||
| CVE-2026-90354 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix double hif2 init on the non-WED path mt7915_pci_init_hif2() was called unconditionally and again inside the WED-inactive branch. The helper increments the global hif_idx, writes the PCIe RECOG_ID register and takes a get_device() reference via mt7915_pci_get_hif2(), while removal only drops one reference. On non-WED dual-hif hardware this double-incremented hif_idx, wrote RECOG_ID twice and leaked a device reference. Only the call inside the WED-inactive branch is correct; drop the unconditional one. hif2 is already initialised to NULL. | ||||
| CVE-2026-90432 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Abort directly from the hardlockup handler scx_hardlockup() defers the abort to an irq_work because exit claiming used to take scx_sched_lock and couldn't run from NMI. The deferral is now unnecessary - claiming is NMI-safe and asserting ->aborting is exactly what breaks the live-locks that hard-lock CPUs. Call handle_lockup() directly and drop the irq_work. This also makes the self-detected case recoverable: the perf watchdog fires on the hard-locked CPU itself, where a queued irq_work never runs with IRQs off. Also fix the return value: %true used to be returned whenever sched_ext was loaded, suppressing the kernel's hardlockup report even when the abort was refused. Return %true only when this call initiated the abort. | ||||
| CVE-2026-93044 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for arena-related insns Since the interpreter does not support the arena-related insns, interpreter fallback should not be allowed for these insns in core.c::__bpf_prog_select_runtime(). Currently, when the interpreter executes the arena ST/LDX/STX insns, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0) [ 2.579998] ------------[ cut here ]------------ [ 2.580652] kernel BUG at kernel/bpf/core.c:2349! [ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI Set jit_required as true when arena map is used in the prog to disallow interpreter fallback for arena-related insns. | ||||
| CVE-2026-93187 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Return error for invalid number of formats When the number of input or output formats is zero, sof_ipc4_widget_setup_comp_src() and sof_ipc4_widget_setup_comp_asrc() print an error and jump to the cleanup label. At that point 'ret' is still 0, because the earlier sof_ipc4_get_audio_fmt() call succeeded, so the function returns success and the caller never finds out that the widget setup actually failed. Set ret to -EINVAL before the goto so the error gets reported. | ||||
| CVE-2026-93193 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: analogix_dp: Fix OF node reference leak via auto cleanup Sashiko reported a reference leak in rockchip_dp_drm_encoder_enable(), the of_get_child_by_name() function does not call of_node_put() in a symmetrical way [1]. Fix the device node reference leak by using __free(device_node) to automatically manage of_node_put() for all device nodes. | ||||