| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| GPAC MP4Box v2.4 was discovered to contain a floating point exception in the gf_parse_lfrac function (utils/error.c). Processing a crafted MP4 file containing a zero-denominator fraction string causes gf_parse_lfrac() to divide by zero, terminating the process with SIGFPE. |
| XSA-501 was about issues with v1 -> v2 and v2 -> v1 changes racing certain
other grant table operations. Sadly a v2 -> v1 -> v2 change has yet
another effect which wasn't accounted for: During the first change, status
pages would be freed. During the second change they would be allocated
again. Hence across the full pair of change the addresses of the status
pages may change, rendering stale previously calculated pointers into the
status array. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-oxp: use cancel_delayed_work_sync() in remove
oxp_hid_remove() uses cancel_delayed_work() for all three delayed work
items. cancel_delayed_work() only dequeues a pending work item without
waiting for a currently executing callback to finish. If any of the
work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is
running at the time of removal, the callback continues executing
concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID
device after it has been closed and stopped.
Use cancel_delayed_work_sync() instead to ensure that any in-progress
work callback completes before device teardown proceeds. |
| filelock is a platform-independent file lock for Python. From 3.20.4 until 4.2.1, ReadWriteLock let SQLite reopen the database and side files by name; on POSIX systems an attacker with rename access in a non-sticky parent can swap those names to cause overwrite or unlink operations, while a writable adjacent hot journal is additionally required for attacker-chosen content overwrites. This issue is fixed in version 4.2.1. |
| filelock is a platform-independent file lock for Python. Prior to 4.2.1, UnixFileLock can truncate a regular file renamed onto the lock path when another local user has actual rename permission, or hard-linked there under a permissive hard-link policy; when an explicit mode is requested, affected versions from 3.10.2 can also change that file's mode. This issue is fixed in version 4.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: replace bind when learning local endpoint
struct ovpn_bind is published through peer->bind with RCU, but local
endpoint learning updates bind->local in place under peer->lock. UDP TX
reads the field without that lock. In particular, a concurrent IPv6
update can therefore result in a torn address read.
Use ovpn_peer_reset_sockaddr to publish a replacement bind when learning
a new local endpoint, just as a remote endpoint change does. Preserve
the current remote address and reset the dst cache only after the new
bind has been published successfully.
Track remote endpoint changes separately so that float notification and
transport-address rehashing remain limited to actual peer floats. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From 2.2.7 until 2.2.11, ServiceSentinel.worker in service/singleton/servicesentinel.go checked an owned service under servicesLock and later dereferenced pointer-valued serviceStatusToday and serviceCurrentStatusData entries under serviceResponseDataStoreLock without revalidating that ServiceSentinel.Delete had not removed them. A RoleMember could concurrently report TCP or ICMP results through the member's own agent and delete the same owned service, causing a nil pointer dereference. Because the gRPC server had no recovery interceptor, the worker panic terminated the whole dashboard process and disrupted every tenant's web interface, REST API, and agent connections. The issue affects availability only and does not disclose or modify data. This issue is fixed in versions 2.2.11 and 2.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix divide-by-zero in btf_struct_walk()
When an access goes past the struct and the last member is a flexible
array, btf_struct_walk() folds the offset back into a single element with
(off - moff) % t->size, but never checks that the element type has a size.
BTF takes an empty struct, so this in program BTF
/* event could be empty */
struct event {
#ifdef HAVE_TIMESTAMP
__u64 ts;
#endif
};
struct batch {
int nr;
struct event events[];
};
divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that
is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a
sleepable program.
Oops: divide error: 0000 [#1] SMP KASAN PTI
RIP: 0010:btf_struct_walk+0x53f/0x1570
Call Trace:
<TASK>
btf_struct_access+0x42a/0xcd0
check_ptr_to_btf_access+0x4dc/0x1160
check_mem_access+0x3a45/0x8740
check_load_mem+0x36a/0xd10
do_check_common+0x3ef0/0xb210
bpf_check+0x6d3b/0x8580
bpf_prog_load+0xf7c/0x2720
__sys_bpf+0xa83/0x3690
__x64_sys_bpf+0xc7/0x150
x64_sys_call+0x1f3f/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Reject a zero-sized element type. The fixed array path in the same function
already bails out on the same thing:
btf_struct_walk()
...
/* skip empty array */
if (moff == mtrue_end)
continue;
msize /= total_nelems; |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix race in _destroy_pages_crste()
Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid
dereferencing the pointer multiple times. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: serialize buffer teardown with mode claims
Buffer-mode claims hold mlock to guarantee that the device remains in
buffer mode until the claim is released. Normal buffer updates take
info_exist_lock followed by mlock in iio_update_buffers().
However, iio_device_unregister() disables and deactivates all buffers
without taking mlock. This can invalidate buffer state, including
active_scan_mask, while a buffer-mode claim is held.
Take mlock in iio_disable_all_buffers() so that unregister honors the
mode-claim lifetime guarantee. The info_exist_lock -> mlock ordering
matches iio_update_buffers(). |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Don't access a DP tunnel after its DPRX read was canceled
tb_dp_dprx_work() checks ->dprx_canceled before it takes tb->lock so it
misses a tb_dp_dprx_stop() that could not cancel the already running
work. It then polls the DPRX capabilities and runs the callback for a
tunnel that has already been torn down while the domain is suspending or
going away.
This can be hit by cancelling the DPRX read from outside the ordered
tb->wq: During suspend tb_disconnect_and_release_dp() does just this and
with a later patch tb_stop() will do it as well. The latter in combination
with the Apple NHI where the DPRX read never completed is how I hit
this.
Check the flag with tb->lock held instead and check it again in
tb_dp_tunnel_active() because the callback runs after the lock has been
dropped again.
Also clear the flag in tb_dp_dprx_start() so that it only ever describes
the work that is currently in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
The invalidHandle, swapfile, oplock_break_cancelled, offload,
and status_file_deleted fields are stored in the same bitfield byte
in struct cifsFileInfo, but are updated in different code paths that
may run simultaneously, and are protected by different locks. Since
bitfield assignments generate byte-level read-modify-write operations,
a modification to one flag can overwrite a concurrent modification to
another flag.
To avoid these races, convert these flags from a bitfield to
separate bool fields. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. A malicious application may be able to bypass Privacy preferences. |
| Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabled at build time and runtime.
Root Cause:
When a bRPC server negotiates RDMA with a client, the handshake completes on the TCP fd, but the server kept parsing that fd afterwards as if it were still an RPC channel. The TCP-fd input stream and the RDMA QP input stream (driven by CQ events) shared the same Socket::_read_buf, preferred_index and parsing_context without synchronization. In addition, CQ event processing could start while the handshake parsing was still in progress, and the handshake ACK phase could consume bytes belonging to the next protocol. A remote, unauthenticated client that has completed the RDMA handshake can send data on the TCP fd at the same time RDMA messages are being processed, corrupting the shared input buffer and parser state and crashing the server process (CWE-362, availability impact).
Affected Scenarios:
Use a bRPC server with RDMA support enabled (built with BRPC_WITH_RDMA and serving rdma:// / SOCKET_MODE_RDMA sockets) and accept connections from untrusted clients. Deployments without RDMA are not affected.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3505 |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in WPdevelop Booking Calendar booking allows Leveraging Race Conditions.This issue affects Booking Calendar: from n/a through 11.8.4. |
| Schroedinger libschroedinger through 1.0.11 contains a divide by zero vulnerability that allows attackers to crash applications by supplying a zero slice_bytes_denom or slice count in a Dirac stream. Attackers can provide a crafted low-delay picture parsed by schro_decoder_parse_transform_parameters and schro_decoder_parse_lowdelay_transform_data to trigger a SIGFPE and cause denial of service. |
| Traefik 2.11.x before 2.11.58 and 3.x before 3.7.14 contains a race condition in NTLM and Kerberos (Negotiate) backend authentication, where the per-connection sticky round tripper slot is read and written without synchronization. Remote attackers can send concurrent HTTP/2 or HTTP/3 requests over one connection to orphan backend connections, break connection-bound authentication, or crash Traefik. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain
struct amdxdna_cmd_chain contains a flexible array annotated with
__counted_by(command_count). Since the structure is stored in shared
AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently.
If command_count is changed to zero, the bounds check generated from
__counted_by may fail and trigger a kernel panic.
Remove __counted_by to avoid relying on the userspace-controlled
command_count for the flexible array bounds check. |
