| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate release report content before using for RTL8922DE
The commit 957eda596c76
("wifi: rtw89: pci: validate sequence number of TX release report")
does validation on existing chips, which somehow a release report of SKB
becomes malformed. As no clear cause found, add rules ahead for RTL8922DE
to avoid crash if it happens. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: validate bsscfg indices in IF events
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
[add missing wifi prefix] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate the whole DACL before rewriting it in cifsacl
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_eui64: reject invalid MAC header for all packets
`eui64_mt6()` derives a modified EUI-64 from the Ethernet source address
and compares it with the low 64 bits of the IPv6 source address.
The existing guard only rejects an invalid MAC header when
`par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()`
can still reach `eth_hdr(skb)` even when the MAC header is not valid.
Fix this by removing the `par->fragoff != 0` condition so that packets
with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: validate MPLS set/set_masked payload length
validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for
SET/SET_MASKED actions. In action handling, OVS expects fixed-size
MPLS key data (struct ovs_key_mpls).
Use the already normalized key_len (masked case included) and reject
non-matching MPLS action key sizes.
Reject invalid MPLS action payload lengths early. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS.
rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[].
Validate addrnr during rule installation so malformed rules are rejected
before the match logic can use an out-of-range value. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: reject mount if bigalloc with s_first_data_block != 0
bigalloc with s_first_data_block != 0 is not supported, reject mounting
it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| A Improper Validation of Specified Quantity in Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated attacker to cause a denial of service via a malformed RSVP packet when RSVP is enabled on the receiving interface. |
| An Improper Validation of Consistency within Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured BGP ISO-VPN peer to cause an rpd crash by sending a specific ISO-VPN update which is then processed by BMP route monitoring or NSR. |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: Check range in proc_dointvec_ms_jiffies_minmax
Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit
d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with
functions") incorrectly removed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Restrict CO-RE poisoning to relocatable instructions
CO-RE relocation records can name any instruction offset. When a
relocation cannot be resolved, bpf_core_patch_insn() currently poisons its
target before checking whether that instruction is a valid relocation
target. Malformed metadata can therefore replace jumps, calls, exits,
register-source arithmetic, or non-immediate loads instead of failing at
the relocation step.
Handle poisoning only after the instruction has passed the same class and
operand-form checks used for a resolved relocation. Route invalid forms
through the existing diagnostic and return a hard error. Keep poisoning
supported instructions, including both halves of a plain ldimm64, so an
unresolved relocation in dead code remains valid.
Extend bpf_core_poison_insn() to poison both halves of ldimm64, and return
its status directly from each validated instruction case. This avoids
routing the success path through a common label and leaves the helper free
to report errors.
The shared relocation code applies this restriction to both libbpf and
in-kernel CO-RE. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject non-negative offsets in stack_slot_obj_get_spi()
bpf_get_spi() computes (-off - 1) / BPF_REG_SIZE using C division,
which truncates toward zero. For off == 0, this produces spi 0, the
same index used by the valid stack slot at fp-8.
stack_slot_obj_get_spi() currently checks alignment and the resulting
spi bounds, but does not reject the non-negative offset itself. It can
therefore validate a PTR_TO_STACK register holding fp+0 against an
iterator stored at fp-8 even though the runtime receives the actual fp+0
pointer. An effectful iterator kfunc can then interpret memory outside
the BPF stack as iterator state.
Reject non-negative offsets before converting the offset to an spi. All
valid stack objects begin at a negative offset from the frame pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: reject out-of-range OCF values
The raw HCI socket security filter has 128 OCF bits per supported OGF,
but masks the 10-bit OCF with 127 before looking up the command. An
unprivileged socket can therefore submit a reserved OCF that aliases an
allowlisted command modulo 128.
A conforming controller should reject reserved opcodes. Nevertheless,
the security decision must apply to the opcode that will actually be
sent, especially since controller-specific behavior is outside the host
stack's control.
Reject OCF values that cannot be represented by the security filter
instead of aliasing them onto an unrelated command. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, the MQTT 5 parser in deps/rabbitmq_mqtt/src/rabbit_mqtt_packet.erl accepts Request-Problem-Information on PUBLISH packets even though the property is valid only for CONNECT. An authenticated publisher with topic write permission can cause the broker to store and route that inapplicable property to a separately authenticated matching subscriber. When the subscriber path serializes the outbound PUBLISH, serialise_prop/2 has no matching clause, and the uncontained function_clause exception closes the victim MQTT or Web MQTT connection. The publisher connection and broker remain available, and queued replay, retained-message persistence, and broker-wide denial of service were not established. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| GitPython before 3.2.0 contains a remote code execution vulnerability that allows attackers to run commands because Git.ls_remote forwards URLs without check_unsafe_protocols validation. Attackers can supply ext:: remote-helper URLs to execute commands when git permits the ext transport, while merge_base and IndexFile.move also accept unguarded option injection. |
| Gitea's OAuth2 token endpoint verified the signature and grant of a token submitted with the `refresh_token` grant type, but not that the token was a refresh token. An unexpired access token for the same OAuth2 application and grant could be exchanged for a new access token and refresh token. Whoever holds such an access token could keep access beyond the token's original lifetime. |
