| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Improper input validation in the SMM communications buffer could allow a privileged attacker to perform an out of bounds read or write to SMRAM potentially resulting in loss of confidentiality or integrity. |
| Nidesoft DVD Ripper 5.2.18 contains a local buffer overflow vulnerability in the License Code registration parameter that allows attackers to execute arbitrary code. Attackers can craft a malicious payload and paste it into the License Code field to trigger a stack-based buffer overflow and execute shellcode. |
| Port Forwarding Wizard 4.8.0 contains a buffer overflow vulnerability that allows local attackers to execute arbitrary code through a long request in the Register feature. Attackers can craft a malicious payload with an egg tag and overwrite SEH handlers to potentially execute shellcode on vulnerable Windows systems. |
| Socusoft Photo to Video Converter Professional 8.07 contains a local buffer overflow vulnerability in the 'Output Folder' input field that allows attackers to execute arbitrary code. Attackers can craft a malicious payload and paste it into the output folder field to trigger a stack-based buffer overflow and potentially execute shellcode. |
| FTPDummy 4.80 contains a local buffer overflow vulnerability in its preference file handling that allows attackers to execute arbitrary code. Attackers can craft a malicious preference file with carefully constructed shellcode to trigger a structured exception handler overwrite and execute system commands. |
| A stack buffer overflow has been identified in the AsIO3.sys driver. This vulnerability can be triggered by input manipulation, may leading to a system crash (BSOD) or other potentially undefined execution.
Refer to the 'Security Update for Armoury Crate App' section on the ASUS Security Advisory for more information. |
| GPAC MP4box 2.1-DEV-rev574-g9d5bb184b contains a buffer overflow in gf_vvc_read_pps_bs_internal function of media_tools/av_parsers.c, check needed for num_exp_tile_columns |
| Improper handling of overlap between the segmented reverse map table (RMP) and system management mode (SMM) memory could allow a privileged attacker corrupt or partially infer SMM memory resulting in loss of integrity or confidentiality. |
| The NtfsHandler.cpp NTFS handler in 7-Zip before 24.01 (for 7zz) contains an out-of-bounds read that allows an attacker to read beyond the intended buffer. The bytes read beyond the intended buffer are presented as a part of a filename listed in the file system image. This has security relevance in some known web-service use cases where untrusted users can upload files and have them extracted by a server-side 7-Zip process. |
| A stack-based buffer overflow vulnerability exists in ActFax Server version 4.32, specifically in the "Import Users from File" functionality of the client interface. The application fails to properly validate the length of tab-delimited fields in .exp files, leading to unsafe usage of strcpy() during CSV parsing. An attacker can exploit this vulnerability by crafting a malicious .exp file and importing it using the default character set "ECMA-94 / Latin 1 (ISO 8859)". Successful exploitation may result in arbitrary code execution, leading to full system compromise. User interaction is required to trigger the vulnerability. |
| A vulnerability has been found in Mercury KM08-708H GiGA WiFi Wave2 1.1. Affected by this issue is the function sub_450B2C of the file /goform/mcr_setSysAdm. The manipulation of the argument ChgUserId leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| Missing protection mechanism for alternate hardware interface in the Intel(R) Quick Assist Technology for some Intel(R) Platforms within Ring 0: Kernel may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Insufficient Granularity of Access Control in SEV firmware could allow a privileged user with a malicious hypervisor to create a SEV-ES guest with an ASID in the range meant for SEV-SNP guests potentially resulting in a partial loss of confidentiality. |
| n affected platforms running Arista EOS, ACL policies may not be enforced. IPv4 ingress ACL, MAC ingress ACL, or IPv6 standard ingress ACL enabled on one or more ethernet or LAG interfaces may result in ACL policies not being enforced for ingress packets. This can cause incoming packets to incorrectly be allowed or denied. The two symptoms of this issue on the affected release and platform are:
* Packets which should be permitted may be dropped and,
* Packets which should be dropped may be permitted. |
| z2d is a pure Zig 2D graphics library. z2d v0.7.0 released with a new multi-sample anti-aliasing (MSAA) method, which uses a new buffering mechanism for storing coverage data. This differs from the standard alpha mask surface used for the previous super-sample anti-aliasing (SSAA) method. Under certain circumstances where the path being drawn existed in whole or partly outside of the rendering surface, incorrect bounding could cause out-of-bounds access within the coverage buffer. This affects the higher-level drawing operations, such as Context.fill, Context.stroke, painter.fill, and painter.stroke, when either the .default or .multisample_4x anti-aliasing modes were used. .supersample_4x was not affected, nor was drawing without anti-aliasing. In non-safe optimization modes (consumers compiling with ReleaseFast or ReleaseSmall), this could potentially lead to invalid memory accesses or corruption. z2d v0.7.1 fixes this issue, and it's recommended to upgrade to v0.7.1, or, given the small period of time v0.7.0 has been released, use v0.7.1 immediately, skipping v0.7.0. |
| Millenium MP3 Studio versions up to and including 2.0 is vulnerable to a stack-based buffer overflow when parsing .pls playlist files. The application fails to properly validate the length of the File1 field within the playlist, allowing an attacker to craft a malicious .pls file that overwrites the Structured Exception Handler (SEH) and executes arbitrary code. Exploitation requires the victim to open the file locally, though remote execution may be possible if the .pls extension is registered to the application and opened via a browser. |
| Xenorate versions up to and including 2.50, a Windows-based multimedia player, is vulnerable to a stack-based buffer overflow when processing .xpl playlist files. The application fails to properly validate the length of input data, allowing an attacker to craft a malicious .xpl file that overwrites the Structured Exception Handler (SEH) and enables arbitrary code execution. Exploitation requires local interaction, typically by convincing a user to open the crafted file. |
| gAlan 0.2.1, a modular audio processing environment for Windows, is vulnerable to a stack-based buffer overflow when parsing .galan files. The application fails to properly validate the length of input data, allowing a specially crafted file to overwrite the stack and execute arbitrary code. Exploitation requires local interaction, typically by convincing a user to open the malicious file. |
