Export limit exceeded: 421046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26196 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64169 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: ep93xx: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. | ||||
| CVE-2026-64168 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: sprd: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to check the dma.enabled flag before trying to release the DMA channels also on late probe errors to avoid dereferencing an error pointer (or attempting to release a channel a second time). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. | ||||
| CVE-2026-64167 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kho: skip KHO for crash kernel kho_fill_kimage() unconditionally populates the kimage with KHO metadata for every kexec image type. When the image is a crash kernel, this can be problematic as the crash kernel can run in a small reserved region and the KHO scratch areas can sit outside it. The crash kernel then faults during kho_memory_init() when it tries phys_to_virt() on the KHO FDT address: Unable to handle kernel paging request at virtual address xxxxxxxx ... fdt_offset_ptr+... fdt_check_node_offset_+... fdt_first_property_offset+... fdt_get_property_namelen_+... fdt_getprop+... kho_memory_init+... mm_core_init+... start_kernel+... kho_locate_mem_hole() already skips KHO logic for KEXEC_TYPE_CRASH images, but kho_fill_kimage() was missing the same guard. As kho_fill_kimage() is the single point that populates image->kho.fdt and image->kho.scratch, fixing it here is sufficient for both arm64 and x86 as the FDT and boot_params path are bailing out when these fields are unset. | ||||
| CVE-2026-64166 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Check for NULL FF-A ID table while driver registration The bus match callback assumes that every FF-A driver provides an id_table and dereferences it unconditionally. Enforce that contract at registration time so a buggy client driver cannot crash the bus during match. | ||||
| CVE-2026-64165 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: integrator: Fix early initialization Starting with commit bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible which in turn calls of_syscon_register. This function allocates memory. Since the memory management code has not been initialized at that time, the call always fails. It either returns -ENOMEM or crashes as follows. Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPT Hardware name: ARM Integrator/CP (Device Tree) PC is at __kmalloc_cache_noprof+0xec/0x39c LR is at __kmalloc_cache_noprof+0x34/0x39c ... Call trace: __kmalloc_cache_noprof from of_syscon_register+0x7c/0x310 of_syscon_register from device_node_get_regmap+0xa4/0xb0 device_node_get_regmap from intcp_init_early+0xc/0x40 intcp_init_early from start_kernel+0x60/0x688 start_kernel from 0x0 The crash is seen due to a dereferenced pointer which is not supposed to be NULL but is NULL if the memory management subsystem has not been initialized. The crash is not seen with all versions of gcc. Some versions such as gcc 9.x apparently do not dereference the pointer, presumably if tracing is disabled. The problem has been reproduced with gcc 10.x, 11.x, and 13.x. Either case, if the crash is not seen, the call to syscon_regmap_lookup_by_compatible returns -ENOMEM, and sched_clock_register is never called. Fix the problem by moving the early initialization code into the standard machine initialization code. | ||||
| CVE-2026-53155 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: use correct flags for device private PMD entry Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") updated set_pmd_migration_entry() to use pmdp_huge_get_and_clear() in the softleaf case, but made no further adjustments to the function itself. Therefore this function continues to incorrectly use pmd_write(), pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed migration entry should be marked writable, softdirty or uffd-wp respectively. Whilst all are incorrect, the most problematic of these is pmd_write(), as this can lead to corrupted rmap state. On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling pmd_write() on a softleaf will return the softdirty state encoded in the entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled. This was observed when running the hmm.hmm_device_private.anon_write_child selftest: 1. The test faults in a range then migrates it such that a device-private THP range is established. 2. The parent then migrates it to a device-private writable PMD entry whose folio is entirely AnonExclusive with entire_mapcount=1, softdirty set (accidentally correct write state). 3. The parent forks and the PMD entries are set to device-private read only entries, entire_mapcount=2, softdirty still set. 4. [BUG] The child writes to the range then migrates to RAM - intending to install non-writable migration entries - but replacing parent and child PMD mappings with WRITABLE entries due to misinterpreting the softdirty bit. 5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for both parent and child, which are therefore AnonExclusive. 6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets entire_mapcount=2 and we end up with an AnonExclusive folio with entire_mapcount=2! Assert fires in __folio_add_anon_rmap(): VM_WARN_ON_FOLIO(folio_test_large(folio) && folio_entire_mapcount(folio) > 1 && PageAnonExclusive(cur_page), folio) This patch fixes the issue by correctly referencing the softleaf entry fields for writable, softdirty and uffd-wp in set_pmd_migration_entry(). It also only updates A/D flags if the entry is present as these are otherwise not meaningful for a softleaf entry. This patch also flips the if (!present) { ... } else { ... } logic in set_pmd_migration_entry() so it is easier to understand, and adds some comments to make things clearer. I was able to bisect this to commit 775465fd26a3 ("lib/test_hmm: add zone device private THP test infrastructure") which first exposes this bug as it was the commit that permitted test_hmm to generate the test. However commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") is the commit that actually enabled this behaviour. | ||||
| CVE-2026-64156 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs, afs: Fix write skipping in dir/link writepages Fix netfs_write_single() and afs_single_writepages() to better handle a write that would be skipped due to lock contention and WB_SYNC_NONE by returning 1 from netfs_write_single() if it skipped and making afs_single_writepages() skip also. If a skip occurs, the inode must be re-marked as the VFS may have cleared the mark. This is really only theoretical for directories in netfs_write_single() as the only path to that is through afs_single_writepages() that takes the ->validate_lock around it, thereby serialising it. | ||||
| CVE-2026-64119 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: use list_del_rcu in l2tp_session_unhash An unprivileged local user can pin a host CPU indefinitely in l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace suffices; on any host that has l2tp_core loaded the trigger is reachable from a standard `unshare -Urn` sandbox. l2tp_session_unhash() removes a session from tunnel->session_list with list_del_init(), but that list is walked by l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under rcu_read_lock_bh(). list_del_init() leaves the deleted entry's next/prev self-pointing; a reader that has loaded the entry and then advances pos->list.next reads &session->list, container_of()s back to the same session, and list_for_each_entry_rcu() never reaches the list head. The CPU stays in strcmp() inside the walker, with BH and preemption disabled, so RCU grace periods on the host stall behind it and the wedged thread cannot be killed (SIGKILL is delivered on syscall return). Use list_del_rcu() to match the existing list_add_rcu() in l2tp_session_register(); the deleted session remains visible to in-flight walkers with consistent next/prev pointers until kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list has exactly one list_del_init() call site; the list_del_init (&session->clist) at l2tp_core.c:533 operates on the per-collision list, which is not walked under RCU. list_empty(&session->list) is not used anywhere in net/l2tp/ after the unhash point, so dropping the post-delete self-init is safe; the fix has no userspace-visible behavior change. | ||||
| CVE-2026-64120 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethtool: fix NULL pointer dereference in phy_reply_size In phy_prepare_data(), several strings such as 'name', 'drvname', 'upstream_sfp_name', and 'downstream_sfp_name' are allocated using kstrdup(). However, these allocations were not checked for failure. If kstrdup() fails for 'name', it returns NULL while the function continues. This leads to a kernel NULL pointer dereference and panic later in phy_reply_size() when it unconditionally calls strlen() on the NULL pointer. While other strings like 'upstream_sfp_name' might be checked before access in certain code paths, failing to handle these allocations consistently can lead to incomplete data reporting or hidden bugs. Fix this by adding proper NULL checks for all kstrdup() calls in phy_prepare_data() and implement a centralized error handling path using goto labels to ensure all previously allocated resources are freed on failure. | ||||
| CVE-2026-64122 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after mlx5e_safe_reopen_channels() has torn down and freed the channel (and its embedded SQs). Replace the three sq->netdev references with priv->netdev which is safe because priv outlives channel teardown. The netdev_err() call already used priv->netdev for this reason; make the trylock/unlock and health_channel_eq_recover calls consistent. This fixes the following KASAN splat: BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277 Call Trace: mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] devlink_health_reporter_recover+0xa2/0x150 devlink_health_report+0x254/0x7c0 mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core] mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core] process_one_work+0x677/0xf20 worker_thread+0x51f/0xd90 kthread+0x3a5/0x810 ret_from_fork+0x208/0x400 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-64124 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: devmem: reject dma-buf bind with non-page-aligned size or SG length net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be PAGE_SIZE multiples without checking: - tx_vec is sized dmabuf->size / PAGE_SIZE, and net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size before indexing tx_vec[virt_addr / PAGE_SIZE]. With size = N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base = N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past. - owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner() covers the full byte len, so a non-page-multiple non-final sg desyncs num_niovs from the gen_pool region for every later sg, on both RX and TX. dma-buf does not require page-aligned sizes, so the bind path has to enforce what its own indexing assumes. Reject both with -EINVAL. The size check is TX-only (only tx_vec is sized off dmabuf->size); the SG-length check covers both directions. | ||||
| CVE-2026-64129 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page When check_stable_address_space() fails after the PMD spinlock has been acquired via pmd_lock(), the code jumps directly to the abort label, bypassing the spin_unlock() call in unlock_abort. This causes the PMD spinlock to be permanently held, leading to a deadlock. Change the goto target from abort to unlock_abort to ensure the spinlock is always released on this error path. | ||||
| CVE-2026-64130 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free __GFP_ZEROTAGS semantics are currently a bit weird, but effectively this flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN. If we run with init_on_free, we will zero out pages during __free_pages_prepare(), to skip zeroing on the allocation path. However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will consequently not only skip clearing page content, but also skip clearing tag memory. Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that will get mapped to user space through set_pte_at() later: set_pte_at() and friends will detect that the tags have not been initialized yet (PG_mte_tagged not set), and initialize them. However, for the huge zero folio, which will be mapped through a PMD marked as special, this initialization will not be performed, ending up exposing whatever tags were still set for the pages. The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state that allocation tags are set to 0 when a page is first mapped to user space. That no longer holds with the huge zero folio when init_on_free is enabled. Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to tag_clear_highpages() whether we want to also clear page content. Invert the meaning of the tag_clear_highpages() return value to have clearer semantics. Reproduced with the huge zero folio by modifying the check_buffer_fill arm64/mte selftest to use a 2 MiB area, after making sure that pages have a non-0 tag set when freeing (note that, during boot, we will not actually initialize tags, but only set KASAN_TAG_KERNEL in the page flags). $ ./check_buffer_fill 1..20 ... not ok 17 Check initial tags with private mapping, sync error mode and mmap memory not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory ... This code needs more cleanups; we'll tackle that next, like decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN. [akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David] | ||||
| CVE-2026-64132 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: refresh hdr pointer before ioam6_event() Reported by Sashiko: In ipv6_hop_ioam(), the hdr pointer is initialized to point into the skb's linear data buffer. Later, the code calls skb_ensure_writable(), which might reallocate the buffer: if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; /* Trace pointer may have changed */ trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + optoff + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev), GFP_ATOMIC, (void *)trace, hdr->opt_len - 2); If the skb is cloned or lacks sufficient linear headroom, skb_ensure_writable() will invoke pskb_expand_head(), which reallocates the skb's data buffer and frees the old one, invalidating pointers to it. While the code recalculates the trace pointer immediately after the call to skb_ensure_writable(), it fails to recalculate the hdr pointer. This patch fixes the above by recalculating the hdr pointer before passing hdr->opt_len to ioam6_event(), so that we avoid any UaF. | ||||
| CVE-2026-64135 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and passes it to i2c_smbus_read_block_data() to retrieve the 4-byte BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour caller buffer sizes -- it memcpy()s data.block[0] bytes from the SMBus transaction (where data.block[0] is the length byte returned by the slave device, up to I2C_SMBUS_BLOCK_MAX = 32): memcpy(values, &data.block[1], data.block[0]); If the device returns any block length above 5, the call overflows the caller's 5-byte stack buffer before the post-call if (ret != 4) return -EIO; check has a chance to reject the response. Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room for any well-formed SMBus block response, matching the convention used by the other i2c_smbus_read_block_data() callers in this driver. | ||||
| CVE-2026-64137 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: require net admin for CIFS SWN netlink CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations. | ||||
| CVE-2026-64285 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Pin source page for write when adding CPUID data for SNP guest When populating a guest_memfd instance with the initial CPUID data for an SNP guest, acquire a writable pin on the source page as KVM will write back the "correct" CPUID information if the userspace provided data is rejected by trusted firmware. Because KVM writes to the source page using a kernel mapping, pinning for read could result in KVM clobbering read-only memory. Note, well-behaved VMMs are unlikely to be affected, as CPUID information is almost always dynamically generated by userspace, i.e. it's unlikely for the CPUID information to be backed by a read-only mapping. [sean: rewrite shortlog and changelog, tag for stable@] | ||||
| CVE-2026-68334 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix io_thread race in rxrpc_wake_up_io_thread() rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but then reloads the pointer for wake_up_process(). local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so the second load can see NULL even if the first load did not. Take a READ_ONCE() snapshot and use it for both the NULL check and the wake_up_process() call, as rxrpc_encap_rcv() already does. | ||||
| CVE-2026-11980 | 4 Apple, Ibm, Linux and 1 more | 5 Macos, Aspera, Aspera Desktop App and 2 more | 2026-08-13 | 7.3 High |
| IBM Aspera Desktop App 1.0.5 through 1.0.19 can allow arbitrary code execution by loading DLL files at start-up. | ||||
| CVE-2026-14973 | 4 Apple, Ibm, Linux and 1 more | 5 Macos, Aspera, Aspera Desktop App and 2 more | 2026-08-13 | 9.3 Critical |
| IBM Aspera Desktop App 1.0.5 through 1.0.19 IBM Aspera for desktop can allow files to be written outside of the user's selected download destination. | ||||