Export limit exceeded: 421035 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26196 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72113 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. | ||||
| CVE-2026-68411 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: clamp virtio RX length before skb_put hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by the device straight to skb_put() on a fixed-size receive skb. A backend reporting a length larger than the skb tailroom drives skb_put() past the buffer end and hits skb_over_panic() -- a host-triggerable guest panic (denial of service). Clamp the length to the skb's available room before skb_put(). A conforming device never reports more than the posted buffer size, so valid frames are unaffected; a truncated over-report then fails the length/header checks in hwsim_virtio_handle_cmd() and is dropped, so truncating rather than dropping here cannot be turned into a parsing problem. | ||||
| CVE-2026-68407 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: free RNR data on MBSSID mismatch nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR entries than MBSSID entries. The rejected RNR allocation has not been attached to the beacon data yet, so free it before returning the error. | ||||
| CVE-2026-68395 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered sata_dwc_enable_interrupts() is called before platform_get_irq() and ata_host_activate(), leaving the SATA controller's interrupt mask enabled without a registered handler. If a later step fails (irq request, phy init, etc.) or if the controller asserts an interrupt during probe, the irq line may fire with no handler, causing a spurious interrupt storm. Move sata_dwc_enable_interrupts() after ata_host_activate() so that interrupts are only unmasked once the handler is registered and the core is fully initialized. | ||||
| CVE-2026-68370 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the "emulated single-request FIFO" fast-path in dummy_queue() reuses for small IN transfers: it copies the caller's request into it (req->req = *_req) and queues it, treating list_empty(&fifo_req.queue) as "the slot is free". The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows the standard pattern: list_del_init(&req->queue) unlinks the request, then the lock is dropped and usb_gadget_giveback_request() invokes req->complete(). But list_del_init() makes fifo_req.queue look empty *before* the completion callback returns, so a concurrent dummy_queue() on another CPU sees the slot as free, reuses fifo_req and runs req->req = *_req -- overwriting req->complete while dummy_timer is mid-calling it. The indirect call then jumps to a clobbered pointer, causing a general protection fault / page fault in dummy_timer (syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an in-bounds memcpy on a live shared object, so KASAN cannot flag it. Add a fifo_req_busy bit covering the shared request's whole lifetime: set it in dummy_queue() when the FIFO fast-path takes fifo_req (making it the fast-path guard, replacing the list_empty(&fifo_req.queue) test), and clear it after the completion callback has returned, via a dummy_giveback() helper used at all four gadget-request giveback sites. The shared slot can no longer be reused until its completion callback has finished. | ||||
| CVE-2026-68369 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: printer: fix infinite loop in printer_read() printer_read() uses the same variable for the requested copy size and the number of bytes actually copied to user space. copy_to_user() returns the number of bytes not copied, so when it fails to copy anything, the computed copied length becomes zero. In that case len, buf, current_rx_bytes and current_rx_buf are left unchanged. If RX data is available and the user buffer remains unwritable, the read loop can repeat indefinitely. Track the copied length separately and return -EFAULT, or the number of bytes already copied, if an iteration makes no progress. | ||||
| CVE-2026-68366 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a response with uvc->event_length and data->length both greater than 60 makes memcpy() read past the end of data->data. Clamp req->length to sizeof(data->data) as well. | ||||
| CVE-2026-68362 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set unconditionally even when ath11k_core_qmi_firmware_ready() fails. This leaves the driver in an inconsistent state where initialization is considered complete although the firmware ready handling did not finish successfully. During the subsequent SSR, the driver enters the restart path based on this incorrect state and dereferences uninitialized srng members, resulting in a NULL pointer dereference. Call trace: ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P) ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k] ath11k_core_restart+0x40/0x168 [ath11k] Fix this by: - skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set - setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds - setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling on error Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 | ||||
| CVE-2026-68361 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-psu) Stop device IO before calling hid_hw_stop hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within corsairpsu_probe(). If the probe operation fails after "io start" has been initiated, this race condition will result in a uaf vulnerability [1]. CPU0 CPU1 ==== ==== corsairpsu_probe() hid_device_io_start() ... unlock driver_input_lock hid_hw_stop() kfree(hidraw) __hid_input_report() ... acquire driver_input_lock hid_report_raw_event() hidraw_report_event() ... access hidraw's list_lock // trigger uaf Consequently, when corsairpsu_probe() fails and hid_hw_stop() needs to be executed, the io_started flag is first cleared while holding the driver_input_lock to prevent potential race conditions involving input reports. [1] BUG: KASAN: slab-use-after-free in rt_spin_lock+0x83/0x400 kernel/locking/spinlock_rt.c:56 Call Trace: hidraw_report_event+0x5d/0x3a0 drivers/hid/hidraw.c:577 hid_report_raw_event+0x311/0x1730 drivers/hid/hid-core.c:2076 __hid_input_report drivers/hid/hid-core.c:2152 [inline] hid_input_report+0x44e/0x580 drivers/hid/hid-core.c:2174 hid_irq_in+0x47e/0x6d0 drivers/hid/usbhid/hid-core.c:286 __usb_hcd_giveback_urb+0x3b3/0x5e0 drivers/usb/core/hcd.c:1657 dummy_timer+0x8a9/0x47d0 drivers/usb/gadget/udc/dummy_hcd.c:2005 Allocated by task 10: hidraw_connect+0x57/0x430 drivers/hid/hidraw.c:606 hid_connect+0x5bf/0x19d0 drivers/hid/hid-core.c:2277 hid_hw_start+0xa8/0x120 drivers/hid/hid-core.c:2387 corsairpsu_probe+0xd9/0x3c0 drivers/hwmon/corsair-psu.c:782 Freed by task 10: hidraw_disconnect+0x4f/0x60 drivers/hid/hidraw.c:662 hid_disconnect drivers/hid/hid-core.c:2362 [inline] hid_hw_stop+0x101/0x1e0 drivers/hid/hid-core.c:2407 corsairpsu_probe+0x327/0x3c0 drivers/hwmon/corsair-psu.c:826 Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). [groeck: Updated subject and description; call hid_device_io_stop() only if IO has been started] | ||||
| CVE-2026-68360 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). | ||||
| CVE-2026-68359 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). | ||||
| CVE-2026-68357 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: pretimeout: Fix UAF in watchdog_unregister_governor() When a watchdog governor is unregistered, it updates existing watchdog devices that were using this governor by falling back to `default_gov`. If the governor being unregistered is currently set as `default_gov`, the `default_gov` is never cleared. This leads to 2 use-after-free issues: 1. New watchdog devices registered after this point will inherit the dangling `default_gov`. 2. Existing watchdog devices using the unregistered governor will have their `wdd->gov` reassigned to the dangling `default_gov`. Fix the UAF by clearing `default_gov` if it matches the governor being unregistered. | ||||
| CVE-2026-68340 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: occ: validate poll response sensor blocks The OCC poll response parser walks a counted list of sensor data blocks. It used the static backing-array capacity as the parse boundary, but a transport response makes only data_length bytes current and valid. A truncated response can therefore make the parser consume a block header or block extent outside the current response. Use data_length as the parent boundary, prove the fixed poll header and each current block header before reading them, and prove the complete block before advancing. Keep parsed sensor metadata local until the complete response has passed validation, then publish it. Propagate malformed-response errors before publishing the OCC as active. | ||||
| CVE-2026-68333 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the dpaa2_mac object. | ||||
| CVE-2026-68331 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after closing the MAC and before freeing the dpaa2_mac object. | ||||
| CVE-2026-68327 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wan: wanxl: Only reset hardware after BAR mapping wanxl_pci_init_one() stores the freshly allocated card in driver data before the PLX BAR is mapped. Several early probe failures then unwind through wanxl_pci_remove_one(), including failure to allocate the coherent status area or to restore the DMA mask. wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and wanxl_reset() dereferences card->plx. On those early failures card->plx is still NULL, so the error path can dereference a NULL MMIO pointer. Only issue the hardware reset once the BAR mapping exists. The remaining cleanup in wanxl_pci_remove_one() already checks whether later resources were allocated. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68324 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/intel: Fix out-of-bounds memset in dmar_latency_disable() dmar_latency_disable() intends to zero out only the single latency_statistic entry for the given type, but the memset size was computed as sizeof(*lstat) * DMAR_LATENCY_NUM, which clears the entire array starting from &lstat[type]. When type > 0, this writes beyond the end of the allocated array, corrupting adjacent memory. Fix by using sizeof(*lstat) to clear only the target entry. | ||||
| CVE-2026-68310 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: guard HE capability lookups mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after checking HE support, then dereference the HE PHY capability returned by mt76_connac_get_he_phy_cap(). That helper can return NULL when no capability entry matches the vif type. Fetch the capability before appending the TLV and skip the HE-specific setup when no matching capability is available. | ||||
| CVE-2026-68302 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: amt: re-read skb header pointers after every pull Several AMT receive and transmit paths cache a pointer into the skb head (ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call a helper that can reallocate that head before the cached pointer is used again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(), iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all free the old head and move the data, so a pointer taken before the call dangles afterwards and the later access is a use-after-free of the freed head. The affected sites are: amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads iph->saddr. amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/ ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address. amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(), then writes the L2 header. amt_membership_query_handler() caches the AMT header, the outer and inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several pulls, then reads and writes them. amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache ip_hdr()/ipv6_hdr() and the current group record and read the record count from the report header inside the record loop, across the *_mc_may_pull() calls. amt_update_handler() caches ip_hdr() and the AMT membership-update header before pskb_may_pull(), iptunnel_pull_header(), ip_mc_check_igmp() and the report handler, then reads iph->daddr and amtmu->nonce / amtmu->response_mac. Fix each site by either snapshotting the scalar that is used after the pull before the first pull runs, or re-deriving the header pointer from the skb after the last pull that can move the head. Values that are stable across the pull (source and group address, the response MAC and nonce, the record count, the outer source MAC) are snapshotted; pointers that are written through or read repeatedly are re-derived. | ||||
| CVE-2026-68259 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds in allocate_event_notification_slot The valid event ids go from 0 to KFD_SIGNAL_EVENT_LIMIT allocate_event_notification_slot has an option to specify an event id to allocate at, used by CRIU. We weren't checking the bounds on that value. Check them. v2: Lower bounds check is unecessary because of idr_alloc already rejecting negative numbers. Upper bounds check should be KFD_SIGNAL_EVENT_LIMIT since the signal mode mappings might not yet exist (cherry picked from commit 6853f1f6cbbeb3f53ebbbd7286536aeb2c5d5f50) | ||||