| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Make UMP message size check more robust
If message offset was larger than the buffer length the size
check will pass incorrectly. Refactor the check such that it is
more robust to invalid sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses
EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated,
but their get and put callbacks access the value through
ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but wsa-macro was missed.
On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value
sanity check and every read of these controls fails with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usbdev_release() drops its reference to the struct usb_device before
draining the list of completed async URBs, but that drain path reads back
through the same object: free_async() calls dec_usb_memory_use_count()
for any URB whose buffer came from the usbfs mmap() region, and its first
statement is bus_to_hcd(ps->dev->bus).
After a disconnect the usbfs reference can be the last one, in which case
usb_put_dev() frees the device and the subsequent loop reads offset 80 of
freed memory and uses the result as a struct usb_hcd *, which
hcd_buffer_free_pages() then dereferences.
This is reachable by an unprivileged process that has read/write access to
a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the
mapping, wait for the device to be unplugged, then munmap() and close().
It reproduces on every attempt rather than being a race, because a live
MAP_SHARED vma holds a reference on the struct file, so usbdev_release()
cannot run until the last vma is gone and the freeing branch of
dec_usb_memory_use_count() is always taken.
BUG: KASAN: slab-use-after-free in dec_usb_memory_use_count+0x3ae/0x410
Read of size 8 at addr ffff8880122ee050 by task poc/769
CPU: 1 UID: 1000 PID: 769 Comm: poc Tainted: G B 6.12.94 #3
Call Trace:
dec_usb_memory_use_count+0x3ae/0x410
free_async+0x2aa/0x4f0
usbdev_release+0x375/0x460
__fput+0x3ea/0xb50
__x64_sys_close+0x86/0x100
Allocated by task 11:
usb_alloc_dev+0x55/0xd90
hub_event+0x2524/0x43d0
Freed by task 769:
kfree+0x121/0x360
device_release+0xd2/0x280
usb_put_dev+0x23/0x30
usbdev_release+0x2d8/0x460
Release the device reference after the drain loop instead. Nothing between
the two points requires it to have been dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qce - fix CCM AAD buffer underallocation
The AAD buffer allocated in qce_aead_ccm_prepare_buf_assoclen()
can be smaller than the length later programmed into the DMA
scatterlist.
The allocation size is currently calculated as:
ALIGN(assoclen, 16) + MAX_CCM_ADATA_HEADER_LEN
while the DMA length is set to:
ALIGN(assoclen + adata_header_len, 16)
Since ALIGN() does not distribute over addition, the allocation
can be smaller than the DMA length. For example, when
assoclen = 32 and adata_header_len = 2:
allocation = ALIGN(32, 16) + 6 = 38
DMA length = ALIGN(32 + 2, 16) = 48
As a result, the QCE hardware can read beyond the allocated
buffer while computing the CBC-MAC over the associated data.
The extra bytes are folded into the authentication tag,
resulting in an incorrect tag and causing CCM self-test
failures such as:
alg: aead: ccm-aes-qce encryption test failed (wrong result)
on test vector 8
Fix the allocation by adding the maximum possible AAD header
length before alignment:
ALIGN(assoclen + MAX_CCM_ADATA_HEADER_LEN, 16)
This guarantees that the allocated buffer is large enough
for the fully padded AAD data for all supported header sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Allocate full pages for {DE,EN}CRYPT ops on SNP-enabled hosts
When {de,en}crypting memory of an SEV or SEV-ES guest on an SNP-enabled
host via a temporary buffer, allocate a full 4KiB page for the buffer to
ensure the page containing the buffer is wholly owned by KVM, i.e. won't
be concurrently allocated and accessed by other kernel code while KVM is
using the buffer to {de,en}crypt memory. On SNP-enabled platforms, when
sending SEV/SEV-ES commands that trigger firmware writes to memory, the
to-be-written page(s) must be (temporarily) assigned to Firmware (as
required by the SNP architecture, to guard against using such commands as
gadgets to attack SNP guests). See snp_map_cmd_buf_desc() and friends.
Unfortunately, transferring ownership of a page to Firmware makes the page
inaccessible to software, and thus writes generate RMP #PF violations. If
KVM uses a sub-page allocation for its temporary buffer, some other actor
in the kernel can allocate and use the other portions of the page, and thus
trigger unexpected (and seemingly spurious) RMP #PF violations due to
software attempting to access a Firmware-owned page.
BUG: unable to handle page fault for address: ffff906ae30f0300
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD 6b1b80d067 P4D 6b1b80d067 PUD 100231e2063 PMD 10055a88063 PTE 80000100630f0163
SEV-SNP: PFN 0x100630f0 unassigned, dumping non-zero entries in 2M PFN region: [0x10063000 - 0x10063200]
Oops: Oops: 0003 [#1] SMP
CPU: 70 UID: 0 PID: 10658 Comm: svw_WaiterThrea Tainted: G U W O 7.1.0-smp--c22293789940-seanjc-next #1 PREEMPTLAZY
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
RIP: 0010:memset+0xf/0x20
Call Trace:
<TASK>
__kvmalloc_node_noprof+0x2a4/0x710
do_getxattr+0x4e/0x130
path_getxattrat+0x125/0x1b0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3a22cb6daa
</TASK>
Modules linked in: kvm_amd kvm irqbypass vfat fat ccp k10temp sha3 libsha3 i2c_piix4 gq(O) cdc_acm xhci_pci xhci_hcd
gsmi: Log Shutdown Reason 0x03
CR2: ffff906ae30f0300
---[ end trace 0000000000000000 ]---
RIP: 0010:memset+0xf/0x20
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x39e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
gsmi: Log Shutdown Reason 0x02 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix usage of page_frag_cache
nvme uses page_frag_cache to preallocate PDU for each preallocated request
of block device. Block devices are created in parallel threads,
consequently page_frag_cache is used in not thread-safe manner.
That leads to incorrect refcounting of backstore pages and premature free.
That can be catched by !sendpage_ok inside network stack:
WARNING: CPU: 7 PID: 467 at ../net/core/skbuff.c:6931 skb_splice_from_iter+0xfa/0x310.
tcp_sendmsg_locked+0x782/0xce0
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x8b/0xa0
nvme_tcp_try_send_cmd_pdu+0x149/0x2a0
Then random panic may occur.
Fix that by serializing the usage of page_frag_cache. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: Allocate iomap inline_data using alloc_page
This fixes a BUG reported in iomap_write_end_inline:
iomap_inline_data_valid checks that the inline_data fits within
a page. If the inline_data is allocated with kmemdup there's no
guarantee that it's page-aligned, so the check sometimes fails.
Allocate it with alloc_page to ensure it's page-aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: xilinx-trng - Remove crypto_rng interface
Implementing the crypto_rng interface has no purpose, as it isn't used
in practice. It's being removed from other drivers too. Just remove
it. This leaves hwrng, which is actually used.
Tagging with 'Cc stable' due to the bugs that this removes:
- xtrng_trng_generate() sometimes returned success even when it didn't
fill in all the bytes.
- It was possible for xtrng_trng_generate() and
xtrng_hwrng_trng_read() to run concurrently and interfere with each
other, as the locking code in xtrng_hwrng_trng_read() was broken. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix vllist leak
Fix a leak of the new vllist in afs_update_cell() in the event that it is an
empty list (nr_servers == 0), in which case the old list isn't displaced
unless the old list is also empty. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: sof-audio: Fix error path in sof_widget_setup_unlocked()
If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget
setup we would double decrement the use_count of the widget because the
sof_widget_free_unlocked() would be called twice, similarly the core_put
would be invoked twice as well.
Since the use_count and core_put() is handled within the widget_free
function we need to return without falling through the pipe_widget_free
label.
The fixes tag is picked to the last change around this part of the code
which is adequately old enough for backporting purposes. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-goodix-spi: validate report size to prevent stack buffer overflow
goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack
buffer (tmp_buf), writing an 11-12 byte header followed by the
caller-supplied report data. The HID core caps report size at
HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set
hid_ll_driver.max_buffer_size and performs no bounds checking before
copying the payload:
memcpy(tmp_buf + tx_len, buf, len);
A hidraw SET_REPORT ioctl with a report larger than ~116 bytes
overflows the stack buffer.
Add a size check after constructing the header, rejecting reports that
would exceed the buffer capacity.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
This patch is a follow-up to commit cf070fe33bfb ("can: isotp: serialize
TX state transitions under so->rx_lock") which addresses following
sashiko-bot findings:
- isotp_sendmsg(): drain so->txfrtimer first so a stale callback can't
re-arm echotimer after the claim
- isotp_release(): wake so->wait after forcing ISOTP_SHUTDOWN so a
sleeping sendmsg() claim isn't stranded
- isotp_sendmsg(): have both wait_event_interruptible() calls in
isotp_sendmsg() also wake on ISOTP_SHUTDOWN and do not return claim to
IDLE to avoid corrupting a concurrent isotp_release() process.
- isotp_sendmsg(): handle potential claim of a new transfer when
the wait_event_interruptible() call returns in CAN_ISOTP_WAIT_TX_DONE
mode. Don't touch timers and states of the new transfer if a new thread
incremented so->tx_gen before getting the lock at err_event_drop.
- isotp_sendmsg(): handle a stuck can_send() and omit timer and state
changes if a new transfer was claimed. wait_tx_done() returns the error
recorded in so->tx_result[], tagged with the caller's own generation.
- isotp_tx_timeout(): on a claimed timeout, record the ECOMM error for
the timed-out transfer's own generation in so->tx_result[]; sk->sk_err
is raised unconditionally, same as every other error path here.
- isotp_tx_gen_done()/isotp_tx_timeout(): always read tx.state (acquire)
before tx_gen - the reverse order let a weakly ordered CPU pair a fresh
tx.state with a stale tx_gen/tx_result slot.
- isotp_sendmsg(): wait_tx_done: drain sk_err via sock_error() once we
have read the result from so->tx_result[], so an already-reported error
doesn't stay latched for a later poll()/SO_ERROR.
Also align the remaining lock-free so->tx.state/rx.state/cfecho accesses
and use skb->hash as unique loopback echo frame indicator. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Order pt_vp_array publish against irqfd assertion path
mshv_partition_ioctl_create_vp() initialises a VP struct (allocations,
mutex_init, init_waitqueue_head, page mappings) and then publishes the
pointer into partition->pt_vp_array. Several ISR paths read this array
locklessly: the intercept ISR, the two scheduler ISRs, and
mshv_try_assert_irq_fast() on the irqfd fast path.
Of these, only mshv_try_assert_irq_fast() can structurally race the
publish. It runs from an eventfd waker without holding pt_mutex, and
MSHV_IRQFD does not require the target lapic_apic_id (== vp_index) to
refer to an existing VP at registration time. A user can therefore
register an irqfd targeting a yet-to-be-created VP, then trigger
mshv_try_assert_irq_fast() concurrently with MSHV_CREATE_VP for the
same index. On weakly-ordered architectures the reader can observe a
non-NULL pointer in pt_vp_array before the initialising stores to the
VP struct become visible, leading to use of partially-initialised
fields (e.g. vp_register_page).
The other ISR readers cannot reach this race: the hypervisor will not
generate intercept or scheduler messages for a VP that has never been
told to run, and the user can only call MSHV_RUN_VP on the VP fd
returned by MSHV_CREATE_VP, which by construction is returned after
the publish. Leave those readers as plain loads.
Use smp_store_release() in mshv_partition_ioctl_create_vp() to publish
the pointer, and pair it with smp_load_acquire() in
mshv_try_assert_irq_fast(). On x86 these compile to plain accesses
under TSO; on ARM64 they emit one-instruction acquire/release barriers,
acceptable on this fast path.
The destroy-side path (destroy_partition() clearing pt_vp_array[i] to
NULL after kfree(vp)) has a separate ordering and lifetime concern
that is out of scope here. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: remove fscache backend entirely
EROFS over fscache was introduced to provide image lazy pulling
functionality. After the feature landed, the fscache subsystem made
netfs a new hard dependency, which is unexpected for a local filesystem
and has an kernel-defined caching hierarchy which could be inflexible
compared to the fanotify pre-content hooks. Therefore, this feature has
been deprecated for almost two years.
As EROFS file-backed mounts and fanotify pre-content hooks both upstream
for a while and already providing equivalent functionality (erofs-utils
has supported fanotify pre-content hooks), let's remove the fscache
backend now.
The main application of this feature is Nydus [1], and they plan to move
to use fanotify pre-content hooks in the near future too.
I hope this patch can be merged into Linux 7.2, which is also motivated
by newly found implementation issues [2][3] that are not worth
investigating given the deprecation and limited development resources.
The associated fscache/cachefiles cleanup patch will follow separately
through the vfs tree (netfs) later: it seems fine since the codebase is
isolated by CONFIG_CACHEFILES_ONDEMAND.
[1] https://github.com/dragonflyoss/nydus/blob/v2.1.0/docs/nydus-fscache.md
[2] https://github.com/dragonflyoss/nydus/pull/1824
[3] https://lore.kernel.org/r/20260619135800.1594811-1-michael.bommarito@gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix sync entry leak on OA config emit failure
xe_oa_emit_oa_config() releases the sync entries and the syncs array
only on its success path. When it fails before the point of no return
(fence allocation, config buffer allocation or batch submission), it
returns without touching stream->syncs.
The stream open path handles such failures in the caller, but
xe_oa_config_locked() propagates the error without any cleanup, so the
syncs array and the fence references held by the parsed entries are
leaked. The next config ioctl overwrites stream->syncs, making the
memory unreachable for good.
Clean up the parsed syncs when xe_oa_emit_oa_config() fails, matching
the cleanup done by the stream open error path.
(cherry picked from commit 8af97b3da2cfce04e6b457c6eb17ed3c1daf912b) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reject UVD message with dimensions above 4096
Fixes potential overflow in DPB size calculations.
(cherry picked from commit 05e1387d151f71569fbe122d2c89f9db0c21dc10) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reject UVD message with invalid number of h265 refs
Same change as for h264, avoids overflow later when calculating
min dpb size.
(cherry picked from commit a4b0720e4f1601f97f59a2be9c1b4b94fa6527d5) |
| NVIDIA NeMo for Linux contains a vulnerability where an attacker may cause OS command injection. A successful exploit of this vulnerability may lead to code execution, data tampering, escalation of privileges and information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound the attribute-list entry in ntfs_read_inode_mount()
The $MFT attribute-list walk in ntfs_read_inode_mount() validates each
entry only with "(u8 *)al_entry + 6 > al_end" and
"(u8 *)al_entry + le16_to_cpu(al_entry->length) > al_end", but then reads
al_entry->lowest_vcn (an __le64 at offset 8) and al_entry->mft_reference
(offset 16) -- fields beyond the 6 bytes proven in range. al_entry->length
is attacker-controlled and only required non-zero, so a short entry (e.g.
length 8) placed at the tail passes both checks while the lowest_vcn /
mft_reference reads fall past al_end.
al_end is ni->attr_list + attr_list_size (the on-disk size); the buffer is
kvzalloc(round_up(attr_list_size, SECTOR_SIZE)), so the sector rounding
usually absorbs the over-read -- but when attr_list_size is a multiple of
SECTOR_SIZE there is no slack and a crafted $MFT attribute list produces an
out-of-bounds read at mount time.
Validate the entry with ntfs_attr_list_entry_is_valid() (added in patch
1/3) before dereferencing it, matching the bound the other attribute-list
walks now use. The validator already requires the length to cover the fixed
header, which makes the separate "!al_entry->length" check redundant, so
drop it too. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Validate CRIU-restored IDs before idr_alloc
The KFD CRIU restore flow restores previously saved object IDs from
userspace.
For event restore:
kfd_criu_restore_event()
-> create_signal_event() / create_other_event()
-> allocate_event_notification_slot()
-> idr_alloc(..., *restore_id, *restore_id + 1, ...)
For BO restore:
criu_restore_memory_of_gpu()
-> idr_alloc(..., bo_priv->idr_handle, ...)
In both cases, the restored ID comes from userspace-provided CRIU data.
idr_alloc() expects the ID range values to fit within signed int
limits. If a restored ID is larger than INT_MAX, it can trigger a WARN
in the IDR layer.
A kernel WARN is undesirable because it prints a warning trace and may
cause a panic or reboot on systems with panic_on_warn enabled.
Smatch reported these paths as allowing unchecked userspace values to
reach idr_alloc().
Add INT_MAX validation before using restored IDs in:
- kfd_criu_restore_event()
- criu_restore_memory_of_gpu()
If the restored ID is invalid, return -EINVAL.
This prevents invalid restore data from reaching the IDR layer and
avoids WARN-triggering paths, while keeping valid restore behavior
unchanged. |
