| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In reset_per_cpu_data(), al is computed as:
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
al += sizeof(struct nlattr);
skb = genlmsg_new(al, GFP_KERNEL);
...
nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
...
msg = nla_data(nla);
memset(msg, 0, al);
Because al includes sizeof(struct nlattr) (the 4-byte attribute header),
genlmsg_new() allocates al bytes of tailroom starting at nla.
However, msg points to nla_data(nla), which is located
sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al)
therefore writes al bytes starting from msg, exceeding the allocated
buffer by sizeof(struct nlattr) (4 bytes) and corrupting
skb_shared_info.
Fix this by letting al represent only the payload length, allocating
the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing
al bytes from msg. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix use-after-free on input2 registration failure
alps_input_configured() stores data->input2 before calling
input_register_device(). If registration fails, input_free_device()
frees the input device but data->input2 still points to the freed memory.
alps_input_configured() calls hid_hw_open() before allocating input2, so
URBs are already active and raw_event can fire during the failure window.
A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event()
to dereference the freed data->input2 -> use-after-free.
Fix by only storing input2 into drvdata after successful registration
and adding a NULL guard in the raw_event path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fs/xattr: don't assume the inode is locked in path_unlink/path_rmdir
bpf_lsm_has_d_inode_locked() makes the verifier rewrite
bpf_[set|remove]_dentry_xattr() to the _locked variants, which assume
that the caller already holds the inode's i_rwsem. The path_unlink and
path_rmdir hooks are listed, but security_path_unlink() and
security_path_rmdir() run before vfs_unlink()/vfs_rmdir() take the
victim inode's i_rwsem, so a sleepable BPF LSM program attached to
either hook mutates the victim's xattrs without the lock held.
Drop the two path hooks from d_inode_locked_hooks so that the verifier
keeps the locking bpf_[set|remove]_dentry_xattr() variants, which take
the lock themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: remove stale channels from all sessions on teardown
ksmbd_sessions_deregister() removes a connection's channels from other
sessions' channel lists only while conn->binding is still set:
if (conn->binding) {
hash_for_each_safe(sessions_table, ...)
ksmbd_chann_del(conn, sess);
}
conn->binding is a transient flag: it is cleared once a binding
SESSION_SETUP completes, and also by a subsequent non-binding
SESSION_SETUP on the same connection (a reauthentication on a bound
channel, or a new SessionId==0 setup). A connection that has bound a
channel into another session's ksmbd_chann_list and then clears
conn->binding leaves that channel behind when it disconnects: the
channel, whose chann->conn points at the now freed struct ksmbd_conn,
stays on the owner session's list.
When the owning connection later tears down, the second loop
dereferences the stale channel:
xa_for_each(&sess->ksmbd_chann_list, chann_id, chann)
if (chann->conn != conn)
ksmbd_conn_set_exiting(chann->conn); /* freed */
which is a use-after-free write into the freed ksmbd_conn (the same
stale channel is also walked by show_proc_session() through /proc). The
session is leaked as well, because its channel list never empties.
Remove the conn->binding gate so a connection always removes its
channels from every session on teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix life cycle of the nested_mmus array
The nested_mmus array holds the shadow page tables that are used when
a guest is running a nested context. These structures are allocated on
VCPU_INIT for whole guest, which implies that they may have to be
relocated as the array grows.
Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and
that the allocation requires relocation, that vcpu will still be
running with a pointer to the previous structure, which will have been
freed.
Fix this by turning the array of structures to an array of pointers,
which is now allocated at VM creation, sized to the absolute maximum
that KVM can handle.
In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No
reallocation is ever performed, and the life cycle of each object is
much clearer:
- the nested_mmus array is allocated in kvm_init_nested(), and freed
in kvm_arch_destroy_vm()
- s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed
on kvm_arch_flush_shadow_all()
Finally, the freeing of vcpu->arch.vncr_array is made consistent
rather than being done on some failure paths, but not others. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Restore Ordered MMIO Writes for Tx Doorbells
The DQL accounting state which tracks the number of bytes queued for the
NIC to transmit, namely dql->num_queued, is updated by the ICE driver
when it invokes __netdev_tx_sent_queue(). Subsequently the driver
updates the hardware queue tail allowing the NIC to begin processing the
work queue. The queue accounting update should be ordered before the NIC
begins transmitting descriptors.
The transmit path currently updates the hardware doorbell using
writel_relaxed(), which (on arm64) does not provide the same ordering
guarantees between writes to normal memory and writes to MMIO registers
that writel() does. This introduces a potential race where the NIC
begins transmitting descriptors before the dql->num_queued update is
globally visible. If the NIC finishes before the update is observed by
dql_completed(), it detects an invalid state where more bytes have been
completed than have been queued. When this happens the following BUG_ON
is triggered.
BUG_ON(count > num_queued - dql->num_completed);
This has been observed and manifests as the following crash (note that
the trace has been trimmed) in an environment with sustained network
load that uses an Intel Corporation Ethernet Controller E810-XXV for SFP
(rev 02) on an arm64 machine. Replacing writel_relaxed() with writel()
in a test kernel eliminated the crash in the user's workload, which
previously reproduced the issue reliably.
kernel BUG at lib/dynamic_queue_limits.c:99
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
pc : dql_completed+0x268/0x2a0
lr : ice_clean_tx_irq+0x1d4/0x620 [ice]
Call trace:
dql_completed+0x268/0x2a0 (P)
ice_napi_poll+0x94/0x520 [ice]
__napi_poll+0x48/0x3f0
net_rx_action+0x194/0x420
This restores the behaviour prior to commit ccde82e90946 ("ice: add E830
Earliest TxTime First Offload support"), which changed the notification
mechanism from writel() to writel_relaxed(). |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: fix DMA mapping length for padded small packets
Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412
NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces:
DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000
[fault reason 0x06] PTE Read access is not set
bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001
...
NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out
The fault address (0xfc499000) is on an exact 4KB page boundary,
pointing to a DMA read buffer overrun.
In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes),
such as 42-byte untagged ARP frames, are padded:
if (length < BNXT_MIN_PKT_SIZE) {
pad = BNXT_MIN_PKT_SIZE - length;
if (skb_pad(skb, pad))
goto tx_kick_pending;
length = BNXT_MIN_PKT_SIZE;
}
mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE);
...
dma_unmap_len_set(tx_buf, len, len);
However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes)
and is left unadjusted after padding. Consequently, dma_map_single() and
dma_unmap_len_set() map and track only 42 bytes.
Later, the hardware TX buffer descriptor is programmed with the padded length:
txbd->tx_bd_len_flags_type =
cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags |
TX_BD_FLAGS_PACKET_END);
The NIC DMA engine is thus instructed to read 52 bytes from a region where
only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB
page (within 'pad' bytes of the next page), the hardware DMA read overruns
into the unmapped adjacent page, triggering an IOMMU fault.
This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic
and races when toggling HW VLAN offload") because reserving extra VLAN
headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data
offsets and potentially causing small frames to land right against page
boundaries.
Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in
bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled,
because padding might linearize the skb.
This ensures skb->len and skb_headlen(skb) reflect the padded size so
that dma_map_single() maps the full buffer and the descriptor length is
consistent. This also removes the temporary 'pad' variable and masking logic.
The padding is done after the SW USO branch, otherwise
bnxt_sw_udp_gso_xmit() would account the padding as UDP payload
and send it in extra segments.
Note that SW USO segments are still not padded: with IPv4, a segment
carrying less than 10 bytes of UDP payload (small gso_size, or a short
last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE.
This is a separate issue, left for a followup patch. |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| Use after free in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task
and copies the PDU's data segment into that command's scatterlist without
asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same
file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE.
A target that answers a WRITE command's ITT with a Data-In therefore has
the initiator write target-supplied bytes into the pages that write was
about to send. Those are the caller's own pinned pages for an O_DIRECT
write, and page cache pages for a buffered one.
Observed against a test target that emits one 512-byte Data-In naming a 128
KB write's ITT, after the R2T for that write. With O_DIRECT the caller's
buffer ends up holding 512 bytes of the target's data while pwrite()
returns 131072. Buffered is quieter: pwrite() and fsync() both succeed,
nothing is logged, and reading those blocks back returns the target's bytes
out of the page cache without a command going on the wire.
Check the direction before using the scatterlist, the way the R2T path
already does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Prevent overstepping exec array boundary
It is possible for eb_relocate_parse_slow() to call kvfree() on
entries outside the original exec array during following
scenario inside eb_relocate_parse_slow():
1) eb_copy_relocations() allocates as many as eb->buffer_count
copies for exec entries;
2) eb_parse() appends up to two VMAs, right after incrementing
eb->buffer_count;
3) cleanup under "out" label uses this incremented buffer_count
to release relocation pointers from exec array via kvfree(),
not from VMA array.
To amend this problem, ensure that relocation cleanup uses the
original exec object count, excluding the VMAs appended by the
command parser.
(cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: fix race when arming the IRQ poll worker
gpio_mpsse_irq_enable() arms the poll worker before publishing it:
schedule_work() runs before the worker is added to priv->workers. If
gpio_mpsse_disconnect() walks the list in that window it misses the
worker, and once disconnect returns, the USB core frees mpsse_priv
while the orphaned gpio_mpsse_poll() work keeps accessing it, causing
a use-after-free.
Fix this by publishing and arming the worker in one irq_spin
critical section. Teardown walks the same list under irq_spin, so a
worker found on the list is guaranteed to be armed, and
cancel_work_sync() handles it whether it is queued or running.
A worker armed after the disconnect walk would still be missed, so
also set a new priv->dying flag under irq_spin before the teardown
walk, and check it in the same critical section, freeing it via
kfree_rcu() instead when the device is going away, since kfree()
would be called with the IRQ core's raw spinlock held and may sleep
on PREEMPT_RT. schedule_work() is safe to call with irq_spin held,
and the next probe gets a fresh mpsse_priv, so the flag never needs
to be cleared.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: destroy topsrv workqueues before closing connections
tipc_topsrv_stop() closed subscriber connections while the topology
server's send and receive workqueues were still running. Socket
callbacks and subscription events could then queue more work, and
in-flight send/recv work could drop the last connection reference
during the conn_idr walk.
That race produced several teardown failures: refcount_t addition on
0 from conn_get() on a connection whose release was blocked on
idr_lock, a subsequent use-after-free in tipc_conn_close(),
queue_work() on an already destroyed workqueue from the listener
data-ready callback, and an RCU stall in tipc_topsrv_exit_net()
while the walk spun under idr_lock.
Clear srv->listener under idr_lock so it acts as a shutdown flag,
skip queue_work() once it is NULL, destroy the workqueues to flush
in-flight work, and only then close the remaining connections.
Refuse tipc_conn_lookup() after that flag is cleared, and drop
idr_lock when the teardown walk finds no connection, so an
in-flight subscription event cannot pin idr_in_use while the
walk holds the lock.
v3 supersedes the narrower in-thread diff Tung Quang Nguyen
posted on 2026-09-23. It keeps his teardown order and adds the
lookup refusal and the empty-idr unlock. |
| In the Linux kernel, the following vulnerability has been resolved:
strparser: make sure __strp_recv isn't running before tearing down the parser
The comment above strp_done() claims that if strp is stopped,
strp_recv will no longer be called. That's only true if the caller has
a mechanism (eg locking) to guarantee that strp_recv() calls that
started before strp_stop() have completed by the time we call
strp_done().
This adds a dummy lock_sock/release_sock pair to guarantee that any
in-flight strp_recv() (which runs under either bh_lock_sock or
lock_sock, depending if it's called from ->sk_data_ready or strp_work)
has completed.
Only espintcp can be affected by this race condition, but this patch
makes sure no future user of strp can have the bug.
This could crash on strp->sk ("general mode" of strp), but this mode
has been here for 9 years and has never been used. It'll be gone soon,
no point worrying about it.
Switch the stopped/paused/etc bits to u8's to avoid races between
strp_stop() and strp_pause/unpause().
A reproducer has been published and turns the possible UAF into an
exploit [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip unsettled links in link iterator
bpf_link_prime() inserts a link into link_idr before anon_inode_getfile()
succeeds and before bpf_link_settle() publishes the ID in link->id.
bpf_link_by_id() treats such an ID-zero link as unsettled, but the link
iterator takes a reference without this check.
If anon_inode_getfile() then fails, the creator removes the ID and frees
its still-private link directly. The iterator is left with a dangling
reference and its next bpf_link_put() accesses freed memory.
Treat ID-zero entries as transient in bpf_link_get_curr_or_next(), just as
bpf_link_by_id() does.
BUG: KASAN: slab-use-after-free in bpf_link_put
Write of size 8 by task exp/384
Call Trace:
bpf_link_put kernel/bpf/syscall.c:3372
bpf_link_seq_next kernel/bpf/link_iter.c:33
bpf_seq_read kernel/bpf/bpf_iter.c:158
vfs_read fs/read_write.c:572
ksys_read fs/read_write.c:716
do_syscall_64 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:121
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix swapped IPv6 IPsec policy masks
IPv6 XFRM policies may use different source and destination prefix
lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks
independently, but setup_fte_addr6() installs each mask in the opposite
address field.
When the prefix lengths differ, this makes the source match use the
destination prefix and the destination match use the source prefix. The
resulting hardware rule can both miss traffic covered by the policy and
match traffic outside it.
Install each mask in its corresponding match field. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM
nouveau_uvmm_sm() calls op_map(), which passes bo->resource through
nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads
mem->mem.type.
But this is only valid when bo->resource is backed by struct nouveau_mem,
as is the case for VRAM and TT resources. If the BO is left in
TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it
as struct nouveau_mem makes the mem->mem.type read past the end of the
resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm
report:
BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report+0xca/0x100 mm/kasan/report.c:595
nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline]
nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532
nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline]
nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364
drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061
process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322
process_scheduled_works kernel/workqueue.c:3405 [inline]
worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486
kthread+0x31d/0x420 kernel/kthread.c:436
ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 2224 on cpu 0 at 66.550027s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106
dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205
ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721
ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856
ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970
nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359
nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272
nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352
drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914
nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583
do_syscall_x64 ar
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix the error path in dpaa2_switch_rx()
In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd()
function is called in order to free the FD. This is incorrect since the
dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors,
meaning that it expects in the software annotation area of the FD data
to find a valid skb pointer on which to call dev_kfree_skb().
Fix this by extracting the dma_unmap_page() from
dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx()
function. This allows us to directly use free_pages() in case of an
error before an SKB was created and kfree_skb() afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't enable large folios on encrypted inodes
Commit 709f0f1f1bf5 ("ext4: add checks for large folio
incompatibilities when BS > PS") disables large folios at mount time
if the "encrypt" feature is set. However, enabling that feature on a
mounted filesystem circumvents that check, and writing encrypted data
results in a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000028
Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work
RIP: 0010:ext4_finish_bio+0xf7/0x3e0
Call Trace:
ext4_release_io_end+0x51/0x110
ext4_end_io_end+0x4c/0xe0
ext4_end_io_rsv_work+0xb3/0x100
Fix this by disabling large folios on encrypted inodes, as is
already done for inodes that use data journaling.
This affects all kernels between v6.19 and v7.2, but it is not needed
in v7.3, where the code was significantly refactored. |
| Heap-based buffer overflow in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. |
