| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Do not bother merging very long extents
When merging very long extents we try to push as much length as possible
to the first extent. However this is unnecessarily complicated and not
really worth the trouble. Furthermore there was a bug in the logic
resulting in corrupting extents in the file as syzbot reproducer shows.
So just don't bother with the merging of extents that are too long
together. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Unregister devlink params in case interface is down
Currently, in case an interface is down, mlx5 driver doesn't
unregister its devlink params, which leads to this WARN[1].
Fix it by unregistering devlink params in that case as well.
[1]
[ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc
[ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61
[ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023
[ 295.543096 ] pc : devlink_free+0x174/0x1fc
[ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core]
[ 295.561816 ] sp : ffff80000809b850
[ 295.711155 ] Call trace:
[ 295.716030 ] devlink_free+0x174/0x1fc
[ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core]
[ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core]
[ 295.743534 ] auxiliary_bus_remove+0x2c/0x50
[ 295.751893 ] __device_release_driver+0x19c/0x280
[ 295.761120 ] device_release_driver+0x34/0x50
[ 295.769649 ] bus_remove_device+0xdc/0x170
[ 295.777656 ] device_del+0x17c/0x3a4
[ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core]
[ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core]
[ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core]
[ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core]
[ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core]
[ 295.833439 ] pci_device_shutdown+0x3c/0xa0
[ 295.841651 ] device_shutdown+0x170/0x340
[ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0
[ 295.857322 ] __arm64_sys_reboot+0x2c/0x40
[ 295.865329 ] invoke_syscall+0x78/0x100
[ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184
[ 295.882392 ] do_el0_svc+0x30/0xac
[ 295.889008 ] el0_svc+0x48/0x160
[ 295.895278 ] el0t_64_sync_handler+0xa4/0x130
[ 295.903807 ] el0t_64_sync+0x1a4/0x1a8
[ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fail to start device if queue setup is interrupted
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.
Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
In the "pmcmd_ioctl" function, three memory objects allocated by
kmalloc are initialized by "hcall_get_cpu_state", which are then
copied to user space. The initializer is indeed implemented in
"acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of
information leakage due to uninitialized bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: max96712: fix kernel oops when removing module
The following kernel oops is thrown when trying to remove the max96712
module:
Unable to handle kernel paging request at virtual address 00007375746174db
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000
[00007375746174db] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan
snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2
imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev
snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils
max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse
[last unloaded: imx8_isi]
CPU: 0 UID: 0 PID: 754 Comm: rmmod
Tainted: G C 6.12.0-rc6-06364-g327fec852c31 #17
Tainted: [C]=CRAP
Hardware name: NXP i.MX95 19X19 board (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : led_put+0x1c/0x40
lr : v4l2_subdev_put_privacy_led+0x48/0x58
sp : ffff80008699bbb0
x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8
x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000
x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1
x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473
Call trace:
led_put+0x1c/0x40
v4l2_subdev_put_privacy_led+0x48/0x58
v4l2_async_unregister_subdev+0x2c/0x1a4
max96712_remove+0x1c/0x38 [max96712]
i2c_device_remove+0x2c/0x9c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x228
driver_detach+0x4c/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
i2c_del_driver+0x54/0x64
max96712_i2c_driver_exit+0x18/0x1d0 [max96712]
__arm64_sys_delete_module+0x1a4/0x290
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400)
---[ end trace 0000000000000000 ]---
This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata()
is called again and the data is overwritten to point to sd, instead of
priv. So, in remove(), the wrong pointer is passed to
v4l2_async_unregister_subdev(), leading to a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
While PLL CPUX clock rate change when CPU is running from it works in
vast majority of cases, now and then it causes instability. This leads
to system crashes and other undefined behaviour. After a lot of testing
(30+ hours) while also doing a lot of frequency switches, we can't
observe any instability issues anymore when doing reparenting to stable
clock like 24 MHz oscillator. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: process: Fix kernel gp leakage
childregs represents the registers which are active for the new thread
in user context. For a kernel thread, childregs->gp is never used since
the kernel gp is not touched by switch_to. For a user mode helper, the
gp value can be observed in user space after execve or possibly by other
means.
[From the email thread]
The /* Kernel thread */ comment is somewhat inaccurate in that it is also used
for user_mode_helper threads, which exec a user process, e.g. /sbin/init or
when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have
PF_KTHREAD set and are valid targets for ptrace etc. even before they exec.
childregs is the *user* context during syscall execution and it is observable
from userspace in at least five ways:
1. kernel_execve does not currently clear integer registers, so the starting
register state for PID 1 and other user processes started by the kernel has
sp = user stack, gp = kernel __global_pointer$, all other integer registers
zeroed by the memset in the patch comment.
This is a bug in its own right, but I'm unwilling to bet that it is the only
way to exploit the issue addressed by this patch.
2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread
before it execs, but ptrace requires SIGSTOP to be delivered which can only
happen at user/kernel boundaries.
3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for
user_mode_helpers before the exec completes, but gp is not one of the
registers it returns.
4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel
addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses
are also exposed via PERF_SAMPLE_REGS_USER which is permitted under
LOCKDOWN_PERF. I have not attempted to write exploit code.
5. Much of the tracing infrastructure allows access to user registers. I have
not attempted to determine which forms of tracing allow access to user
registers without already allowing access to kernel registers. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set up encryption key during jbd2 transaction
Commit a80f7fcf1867 ("ext4: fixup ext4_fc_track_* functions' signature")
extended the scope of the transaction in ext4_unlink() too far, making
it include the call to ext4_find_entry(). However, ext4_find_entry()
can deadlock when called from within a transaction because it may need
to set up the directory's encryption key.
Fix this by restoring the transaction to its original scope. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.
[ 2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[ 2.522601] Call trace:
[ 2.525040] regmap_read+0x1c/0x80
[ 2.528434] mt8173_afe_irq_handler+0x40/0xf0
...
[ 2.598921] start_kernel+0x338/0x42c |
| A vulnerability was found in TOZED ZLT M30s up to 1.47. Impacted is an unknown function of the file /reqproc/proc_post of the component Web Management Interface. Performing manipulation of the argument goformId results in information disclosure. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert.
So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq
should be executed under such condition, otherwise, an amdgpu_irq_put
calltrace will occur.
[ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246
[ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000
[ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000
[ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006
[ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050
[ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.170986] Call Trace:
[ 7283.170988] <TASK>
[ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu]
[ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.172245] amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.173412] pci_pm_freeze+0x54/0xc0
[ 7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10
[ 7283.173425] dpm_run_callback+0x98/0x200
[ 7283.173430] __device_suspend+0x164/0x5f0
v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking) |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees
When we don't have a clock specified in the device tree, we have no way to
ensure the BAM is on. This is often the case for remotely-controlled or
remotely-powered BAM instances. In this case, we need to read num-channels
from the DT to have all the necessary information to complete probing.
However, at the moment invalid device trees without clock and without
num-channels still continue probing, because the error handling is missing
return statements. The driver will then later try to read the number of
channels from the registers. This is unsafe, because it relies on boot
firmware and lucky timing to succeed. Unfortunately, the lack of proper
error handling here has been abused for several Qualcomm SoCs upstream,
causing early boot crashes in several situations [1, 2].
Avoid these early crashes by erroring out when any of the required DT
properties are missing. Note that this will break some of the existing DTs
upstream (mainly BAM instances related to the crypto engine). However,
clearly these DTs have never been tested properly, since the error in the
kernel log was just ignored. It's safer to disable the crypto engine for
these broken DTBs.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/ |
| Incorrect default permission in Framework for Galaxy Watch prior to SMR Jul-2025 Release 1 allows local attackers to reset some configuration of Galaxy Watch. |
| Improper access control in SamsungAccount for Galaxy Watch prior to SMR Jul-2025 Release 1 allows local attackers to access phone number. |
| A potential security vulnerability has been identified in the HP Support Assistant, which allows a local attacker to escalate privileges via an arbitrary file deletion. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: ufs: Fix a hang in the error handler
ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter
function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because
resuming involves submitting a SCSI command and ufshcd_queuecommand()
returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this
hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has
been called instead of before.
Backtrace:
__switch_to+0x174/0x338
__schedule+0x600/0x9e4
schedule+0x7c/0xe8
schedule_timeout+0xa4/0x1c8
io_schedule_timeout+0x48/0x70
wait_for_common_io+0xa8/0x160 //waiting on START_STOP
wait_for_completion_io_timeout+0x10/0x20
blk_execute_rq+0xe4/0x1e4
scsi_execute_cmd+0x108/0x244
ufshcd_set_dev_pwr_mode+0xe8/0x250
__ufshcd_wl_resume+0x94/0x354
ufshcd_wl_runtime_resume+0x3c/0x174
scsi_runtime_resume+0x64/0xa4
rpm_resume+0x15c/0xa1c
__pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing
ufshcd_err_handler+0x1a0/0xd08
process_one_work+0x174/0x808
worker_thread+0x15c/0x490
kthread+0xf4/0x1ec
ret_from_fork+0x10/0x20
[ bvanassche: rewrote patch description ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: drop all currently held locks if deadlock happens
If vc4_hdmi_reset_link() returns -EDEADLK, it means that a deadlock
happened in the locking context. This situation should be addressed by
dropping all currently held locks and block until the contended lock
becomes available. Currently, vc4 is not dealing with the deadlock
properly, producing the following output when PROVE_LOCKING is enabled:
[ 825.612809] ------------[ cut here ]------------
[ 825.612852] WARNING: CPU: 1 PID: 116 at drivers/gpu/drm/drm_modeset_lock.c:276 drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.613458] Modules linked in: 8021q mrp garp stp llc
raspberrypi_cpufreq brcmfmac brcmutil crct10dif_ce hci_uart cfg80211
btqca btbcm bluetooth vc4 raspberrypi_hwmon snd_soc_hdmi_codec cec
clk_raspberrypi ecdh_generic drm_display_helper ecc rfkill
drm_dma_helper drm_kms_helper pwm_bcm2835 bcm2835_thermal bcm2835_rng
rng_core i2c_bcm2835 drm fuse ip_tables x_tables ipv6
[ 825.613735] CPU: 1 PID: 116 Comm: kworker/1:2 Tainted: G W 6.1.0-rc6-01399-g941aae326315 #3
[ 825.613759] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 825.613777] Workqueue: events output_poll_execute [drm_kms_helper]
[ 825.614038] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 825.614063] pc : drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.614603] lr : drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[ 825.614829] sp : ffff800008313bf0
[ 825.614844] x29: ffff800008313bf0 x28: ffffcd7778b8b000 x27: 0000000000000000
[ 825.614883] x26: 0000000000000001 x25: 0000000000000001 x24: ffff677cc35c2758
[ 825.614920] x23: ffffcd7707d01430 x22: ffffcd7707c3edc7 x21: 0000000000000001
[ 825.614958] x20: 0000000000000000 x19: ffff800008313c10 x18: 000000000000b6d3
[ 825.614995] x17: ffffcd777835e214 x16: ffffcd7777cef870 x15: fffff81000000000
[ 825.615033] x14: 0000000000000000 x13: 0000000000000099 x12: 0000000000000002
[ 825.615070] x11: 72917988020af800 x10: 72917988020af800 x9 : 72917988020af800
[ 825.615108] x8 : ffff677cc665e0a8 x7 : d00a8c180000110c x6 : ffffcd77774c0054
[ 825.615145] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[ 825.615181] x2 : ffff677cc55e1880 x1 : ffffcd7777cef8ec x0 : ffff800008313c10
[ 825.615219] Call trace:
[ 825.615232] drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.615773] drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[ 825.616003] output_poll_execute+0xe4/0x224 [drm_kms_helper]
[ 825.616233] process_one_work+0x2b4/0x618
[ 825.616264] worker_thread+0x24c/0x464
[ 825.616288] kthread+0xec/0x110
[ 825.616310] ret_from_fork+0x10/0x20
[ 825.616335] irq event stamp: 7634
[ 825.616349] hardirqs last enabled at (7633): [<ffffcd777831ee90>] _raw_spin_unlock_irq+0x3c/0x78
[ 825.616384] hardirqs last disabled at (7634): [<ffffcd7778315a78>] __schedule+0x134/0x9f0
[ 825.616411] softirqs last enabled at (7630): [<ffffcd7707aacea0>] local_bh_enable+0x4/0x30 [ipv6]
[ 825.617019] softirqs last disabled at (7618): [<ffffcd7707aace70>] local_bh_disable+0x4/0x30 [ipv6]
[ 825.617586] ---[ end trace 0000000000000000 ]---
Therefore, deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().
[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking |
| In the Linux kernel, the following vulnerability has been resolved:
x86/platform/uv: Use alternate source for socket to node data
The UV code attempts to build a set of tables to allow it to do
bidirectional socket<=>node lookups.
But when nr_cpus is set to a smaller number than actually present, the
cpu_to_node() mapping information for unused CPUs is not available to
build_socket_tables(). This results in skipping some nodes or sockets
when creating the tables and leaving some -1's for later code to trip.
over, causing oopses.
The problem is that the socket<=>node lookups are created by doing a
loop over all CPUs, then looking up the CPU's APICID and socket. But
if a CPU is not present, there is no way to start this lookup.
Instead of looping over all CPUs, take CPUs out of the equation
entirely. Loop over all APICIDs which are mapped to a valid NUMA node.
Then just extract the socket-id from the APICID.
This avoid tripping over disabled CPUs. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not ignore genmask when looking up chain by id
When adding a rule to a chain referring to its ID, if that chain had been
deleted on the same batch, the rule might end up referring to a deleted
chain.
This will lead to a WARNING like following:
[ 33.098431] ------------[ cut here ]------------
[ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260
[ 33.099217] Modules linked in:
[ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409
[ 33.099726] Workqueue: events nf_tables_trans_destroy_work
[ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260
[ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7
[ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202
[ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000
[ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000
[ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500
[ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10
[ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000
[ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0
[ 33.104872] PKRU: 55555554
[ 33.104999] Call Trace:
[ 33.105113] <TASK>
[ 33.105214] ? show_regs+0x72/0x90
[ 33.105371] ? __warn+0xa5/0x210
[ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.105732] ? report_bug+0x1f2/0x200
[ 33.105902] ? handle_bug+0x46/0x90
[ 33.106546] ? exc_invalid_op+0x19/0x50
[ 33.106762] ? asm_exc_invalid_op+0x1b/0x20
[ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.107249] ? nf_tables_chain_destroy+0x30/0x260
[ 33.107506] nf_tables_trans_destroy_work+0x669/0x680
[ 33.107782] ? mark_held_locks+0x28/0xa0
[ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10
[ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70
[ 33.108538] process_one_work+0x68c/0xb70
[ 33.108755] ? lock_acquire+0x17f/0x420
[ 33.108977] ? __pfx_process_one_work+0x10/0x10
[ 33.109218] ? do_raw_spin_lock+0x128/0x1d0
[ 33.109435] ? _raw_spin_lock_irq+0x71/0x80
[ 33.109634] worker_thread+0x2bd/0x700
[ 33.109817] ? __pfx_worker_thread+0x10/0x10
[ 33.110254] kthread+0x18b/0x1d0
[ 33.110410] ? __pfx_kthread+0x10/0x10
[ 33.110581] ret_from_fork+0x29/0x50
[ 33.110757] </TASK>
[ 33.110866] irq event stamp: 1651
[ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0
[ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0
[ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112453] ---[ end trace 0000000000000000 ]---
This is due to the nft_chain_lookup_byid ignoring the genmask. After this
change, adding the new rule will fail as it will not find the chain. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/uffd: fix warning without PTE_MARKER_UFFD_WP compiled in
When PTE_MARKER_UFFD_WP not configured, it's still possible to reach pte
marker code and trigger an warning. Add a few CONFIG_PTE_MARKER_UFFD_WP
ifdefs to make sure the code won't be reached when not compiled in. |
