| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Null pointer dereference in Windows SMB Server Network Transport Driver (srvnet.sys) allows an unauthorized attacker to deny service over a network. |
| A security flaw has been discovered in GNU Binutils 2.47. This vulnerability affects the function elf_orphan_compatible of the file ld/ldelf.c of the component ELF Orphan Section Handler. Performing a manipulation results in null pointer dereference. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through a bug report but has not responded yet. |
| A NULL pointer dereference flaw was found in GStreamer's RTSP support library. The vulnerability occurs while parsing an Authorization or WWW-Authenticate header that uses Digest authentication. Specially crafted whitespace placement around a parameter's terminator can cause an internal length calculation to underflow, leading to a crash of the process parsing the header. On an RTSP server this can be triggered by a remote, unauthenticated attacker sending a single malformed request when the server has authentication enabled; the same flaw can also be triggered against an RTSP client by a malicious or compromised RTSP server. Successful exploitation results in a denial of service (application crash) and has no confirmed impact on confidentiality or integrity. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized
tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to
the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds
the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ
error (e.g. one inherited across a kexec) firing in this window would make
tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to
__arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers.
Drop the store from tegra241_vintf_init_lvcmdq() and publish the vcmdq at
the end of the allocation instead, with an smp_store_release() that pairs
with an smp_load_acquire() in the ISR, which can see a fully built LVCMDQ
or NULL.
The user-owned LVCMDQ allocation moves accordingly, publishing the vcmdq
once tegra241_vcmdq_hw_init_user() succeeds, using a plain store since a
user VINTF's lvcmdqs[] has no lockless reader -- the error ISR only walks
the VINTF0 array. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Guard admin state-revocation walks with NFSD_NET_UP
Writing to /proc/fs/nfsd/unlock_filesystem, or sending the
NFSD_CMD_UNLOCK_FILESYSTEM or NFSD_CMD_UNLOCK_EXPORT netlink command,
walks the NFSv4 client hash tables to revoke open state and cancel
async COPY operations. All three handlers gate that walk on
nn->nfsd_serv, but a listener added via portlist or netlink
listener_set sets nn->nfsd_serv before any nfsd thread starts.
nfsd_startup_net() has not yet allocated nn->conf_id_hashtbl, so the
walkers dereference a NULL table. A local administrator with
CAP_SYS_ADMIN can crash the kernel this way without ever starting the
server.
nn->nfsd_serv is set when the service is created, which precedes
table allocation. NFSD_NET_UP instead brackets the window where the
tables are live: set at the end of nfsd_startup_net() and cleared in
nfsd_shutdown_net() after they are freed, both under nfsd_mutex.
Gating the three unlock paths on NFSD_NET_UP fixes the startup-time
NULL dereference while preserving the earlier post-shutdown
use-after-free fix. |
| In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.
rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject redirect helpers without a bpf_net_context
The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task
bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the
current->bpf_net_context unconditionally. That context is established
on the paths that run tc BPF such as sch_handle_{ingress,egress}(),
*except* for the case where {cls,act}_bpf was attached to a proper
qdisc. A program running from there reaches the NULL deref in two ways:
* It calls bpf_redirect() directly, which dereferences the context at
the top of the helper:
tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \
avpkt 1000 burst 100 qevent early_drop block 10
tc filter add block 10 pref 1 bpf obj redirect.o
* It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle()
then dispatches to skb_do_redirect(), which dereferences the context
Rather than extending bpf_net_context management into the qdisc path,
make the redirect helpers refuse to operate when no context exists, and
have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of
calling skb_do_redirect(). Previous behaviour was a crash, so nothing
regresses by not supporting it. |
| An issue in Free5GC v.4.2.2 allows a remote attacker to cause a denial of service via the UPF component |
| A NULL pointer dereference vulnerability exists in the Prism parser component of mruby 4.0.0. An attacker can provide a specially crafted Ruby source file that triggers the parser to pass a NULL pointer to nonnull string handling functions, resulting in undefined behavior and application crash. |
| A null pointer dereference was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, visionOS 27, watchOS 27. Processing web content may lead to a denial-of-service. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup
af_xdp_zc_qidx tracks receive queues using AF_XDP zero-copy and is
allocated during PF/VF probe. Representors and other non-AF_XDP paths
leave the pointer NULL, but several call sites used test_bit() on it
unconditionally.
Switching to devlink eswitch mode creates representors and runs
otx2_init_hw_resources(), which reaches otx2_pool_aq_init() and oopses
when dereferencing the NULL bitmap. Add NULL checks before every
af_xdp_zc_qidx test_bit() use in the RSS, ethtool, XSK, and pool init
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: restore skb->dev on deaggregated frames
rmnet_map_deaggregate() allocates each sub-frame with alloc_skb() and
leaves skb->dev NULL. __rmnet_map_ingress_handler() assigns
skb->dev = ep->egress_dev only on the data path, but a MAP command frame
is dispatched to rmnet_map_command() before that, so rmnet_map_send_ack()
runs netif_tx_lock(skb->dev) on a NULL device. An unprivileged user
reaches this by unsharing a user+net namespace, creating an rmnet link
over a tap device with INGRESS_DEAGGREGATION and INGRESS_MAP_COMMANDS,
and writing an aggregated frame carrying a flow-control command to the
tap fd.
Restore the assignment dropped by 378e25357ac7, so every skb leaving
rmnet_map_deaggregate() has a valid device.
BUG: KASAN: null-ptr-deref in _raw_spin_lock (kernel/locking/spinlock.c:158)
Write of size 4 at addr 00000000000004b4 by task exploit/144
Call Trace:
_raw_spin_lock (kernel/locking/spinlock.c:158)
netif_tx_lock (net/sched/sch_generic.c:497)
rmnet_map_command (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:67)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:125)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6103)
...
__netif_receive_skb_one_core (net/core/dev.c:6214)
netif_receive_skb (net/core/dev.c:6474)
tun_get_user (drivers/net/tun.c:1966)
tun_chr_write_iter (drivers/net/tun.c:2012)
vfs_write (fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
ftrace_direct_multi_init() assigns kthread_run()'s return value to
simple_tsk without an IS_ERR() check. When kthread_run() fails it
returns ERR_PTR(-ENOMEM), but init still returns 0, so the module loads
with simple_tsk holding an error pointer. On unload,
ftrace_direct_multi_exit() then passes that ERR_PTR to kthread_stop(),
leading to a null-pointer-dereference.
Check the return value of kthread_run() with IS_ERR(); on failure,
unregister the ftrace direct call and propagate the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix race l2cap_sock_cleanup_listen() vs. put_chan
For L2CAP sockets without owning sk->sk_socket, reading
l2cap_pi(sk)->chan may race against concurrent l2cap_sock_kill() ->
l2cap_sock_put_chan(). This excludes simultaneous proto_ops callbacks,
but access in l2cap_sock_cleanup_listen() has unsafe lockless read.
[Task 1] [Task 2 (hdev->workqueue)]
l2cap_sock_release(parent) l2cap_disconn_cfm
l2cap_sock_cleanup_listen l2cap_conn_del
bt_accept_dequeue l2cap_chan_del
lock_sock(sk) l2cap_sock_teardown_cb
bt_accept_unlink
bt_sk(sk)->parent = NULL
release_sock(sk) ----------------> lock_sock(sk)
parent = /* NULL */
lock_sock(sk) <--------------------- release_sock(sk)
sock_set_flag(sk, SOCK_ZAPPED)
l2cap_sock_close_cb
l2cap_sock_kill(sk)
l2cap_sock_put_chan
chan = READ l2cap_pi(sk)->chan l2cap_pi(sk)->chan = NULL
l2cap_chan_hold_unless_zero l2cap_put_chan(chan)
kref_get_unless_zero(&chan->ref)
Task 1 may observe NULL which causes null-ptr-deref.
Fix the race by taking lock_sock() in l2cap_sock_kill() to
synchronize with l2cap_sock_cleanup_listen(). hold_unless_zero() is not
needed here, l2cap_pi(sk)->chan owns reference if it is non-NULL.
Clarify code comments vs. locking. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pnfs: key the data server cache on the NFS version
nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath
address set alone, and struct nfs4_pnfs_ds records no version. That
suffices for the files layout driver, which always connects with version
4, but flexfiles takes its version tuple from GETDEVICEINFO per device,
and one address can legitimately serve both NFSv3 and NFSv4.
Two deviceids on one address with different ds_versions[0].version
therefore share a single nfs4_pnfs_ds, and whichever mirror connects
first pins ds_clp to its own version. The other one is handed that
client anyway, so it selects rpc_call_ops for a version the connection
does not speak, and the mismatched sequence-slot handling dereferences
NULL.
Add the version to the cache key so the two cannot alias, giving each
version its own nfs4_pnfs_ds and connection while both mirrors stay
usable. Only the major version is compared, since that is what selects
rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files
layout driver passes the 4 it already hardcodes at connect time. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: check for NULL root inode in fuse_fill_super_submount
fuse_iget() can return NULL when its inode allocation fails, but
fuse_fill_super_submount() passed the result straight to get_fuse_inode()
and decremented fi->nlookup without checking it:
root = fuse_iget(sb, parent_fi->nodeid, ...);
fi = get_fuse_inode(root);
fi->nlookup--;
Inside fuse_iget() the inode allocation can fail and return NULL. The
submount root takes the iget5_locked() path, whose alloc_inode() can fail
under memory pressure (the auto-submount branch can fail the same way in
new_inode() or fuse_alloc_submount_lookup()):
inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set,
&nodeid);
if (!inode)
return NULL;
A NULL root makes get_fuse_inode() a container_of() on NULL and the
nlookup decrement a write to a bogus address, oopsing the mount. With
CONFIG_KASAN the following null pointer dereference is reported when the
root inode allocation of an auto-submount fails (e.g. under memory
pressure):
==================================================================
BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0
Read of size 8 at addr 00000000000002b0 by task ls/942
CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15
Call Trace:
<TASK>
fuse_get_tree_submount+0x656/0x8b0
vfs_get_tree+0x48/0x140
fc_mount+0x13/0x50
fuse_dentry_automount+0x7a/0xb0
__traverse_mounts+0xca/0x330
step_into+0x339/0xac0
path_lookupat+0xc5/0x2f0
filename_lookup+0x163/0x2a0
vfs_statx+0xd5/0x200
do_statx+0x83/0xd0
__x64_sys_statx+0xa0/0xc0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x78/0xe2
</TASK>
==================================================================
Return -ENOMEM instead; the caller tears down the partially built
superblock on error, matching the other error returns in this
function. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix NULL deref in NIX TM tree debugfs read path
rvu_dbg_nix_tm_tree_display() dereferences pfvf->sq_ctx without
checking whether the SQ context has been allocated. Reading
/sys/kernel/debug/octeontx2/nix/tm_tree for a NIX LF whose transmit
queues are not set up triggers a kernel oops.
Guard the read path the same way rvu_dbg_nix_tm_tree_write() already
does and return -EINVAL with a seq_file message when sq_ctx is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: reject per-device queue resize for shared tag set
When shared_tags is enabled, null_setup_tagset() makes the device use the
global tag_set, whose driver_data stays NULL. null_map_queues() therefore
falls back to the module-wide g_submit_queues/g_poll_queues instead of any
per-device value.
Resizing submit_queues or poll_queues via configfs on such a device calls
blk_mq_update_nr_hw_queues() on the shared set, shrinking
set->nr_hw_queues. __blk_mq_realloc_hw_ctxs() only grows the
q->queue_hw_ctx[] allocation, so on shrink it merely exits and NULLs the
now-excess hctx slots. null_map_queues(), however, keeps mapping CPUs with
the unchanged g_submit_queues/g_poll_queues, so mq_map[] ends up pointing
at those NULLed hctx slots. blk_mq_map_swqueue() then dereferences the NULL
hctx (hctx->cpumask), crashing the kernel:
[ 460.218374] KASAN: null-ptr-deref in range [0x0000000000000098-0x000000000000009f]
[ 460.219003] CPU: 24 UID: 0 PID: 1492 Comm: sh Not tainted 7.2.0-rc2+ #67 PREEMPT(full)
[ 460.219792] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
[ 460.220452] RIP: 0010:blk_mq_map_swqueue+0x4db/0x1430
......
[ 460.228977] Call Trace:
[ 460.229175] <TASK>
[ 460.229354] blk_mq_update_nr_hw_queues+0xd49/0x11c0
[ 460.229779] ? __pfx_blk_mq_update_nr_hw_queues+0x10/0x10
[ 460.230200] nullb_update_nr_hw_queues+0x1a9/0x370 [null_blk]
[ 460.230694] nullb_device_submit_queues_store+0xd9/0x170 [null_blk]
[ 460.231190] ? __pfx_nullb_device_submit_queues_store+0x10/0x10 [null_blk]
[ 460.231776] ? configfs_write_iter+0x35c/0x4e0
[ 460.232122] configfs_write_iter+0x286/0x4e0
[ 460.232460] vfs_write+0x52d/0xd00
[ 460.232779] ? __x64_sys_openat+0x108/0x1d0
[ 460.233106] ? __pfx_vfs_write+0x10/0x10
[ 460.233413] ? fdget_pos+0x1cf/0x4c0
[ 460.233745] ? fput_close+0x133/0x190
[ 460.234038] ? __pfx_expand_files+0x10/0x10
[ 460.234368] ksys_write+0xfc/0x1d0
Reproducer:
modprobe null_blk shared_tags=1 submit_queues=64 poll_queues=1
mkdir /sys/kernel/config/nullb/dev
echo 1 > /sys/kernel/config/nullb/dev/power
echo 1 > /sys/kernel/config/nullb/dev/submit_queues
A per-device resize of a shared tag set is meaningless anyway, so reject it
with -EINVAL in nullb_update_nr_hw_queues() when the device is bound to the
global tag_set. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: abort initialization when proc setup fails
ksmbd_server_init() calls ksmbd_proc_init() before creating the
remaining proc entries and server subsystems. ksmbd_proc_init() tears
down partial state on a procfs or percpu_counter allocation failure,
but returns void, so ksmbd_server_init() continues as if the counters
were usable.
Once userspace starts the server, server_ctrl_handle_init() calls
ksmbd_proc_reset(), which reaches percpu_counter_set() with a NULL
per-CPU counters pointer on SMP systems. The later ksmbd_proc_create()
calls also receive a NULL parent and may create entries in the /proc
root; ksmbd_proc_cleanup() cannot remove those entries because
ksmbd_proc_fs is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: delay the final Login Response until the session is registered
isert_put_login_tx() puts the final Login Response on the wire before
__transport_register_session(), which iscsi_post_login_handler() reaches
only after iscsi_target_do_login() returns. An initiator that issues a
SCSI command as soon as it sees that response can have it executed against
an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses
on the NULL dereference.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ib-comp-wq ib_cq_poll_work
RIP: 0010:target_submit+0xbe/0x390
Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00
RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363
RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078
RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52
R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000
R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044
FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? __pfx__raw_spin_lock_bh+0x10/0x10
? __pfx_target_submit+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? iscsit_execute_cmd+0x650/0x850
iscsit_sequence_cmd+0x186/0x3d0
iscsit_process_scsi_cmd+0x87/0x300
isert_recv_done+0x1002/0x2390
? __pfx_isert_recv_done+0x10/0x10
? rxe_poll_cq+0x253/0x3d0
? finish_task_switch.isra.0+0x1dc/0xa70
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Delay the final Login Response instead. isert_get_rx_pdu() runs from
iscsi_target_rx_thread() after conn->rx_login_comp, completed by
iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP
and cxgbit already take PDUs from that thread, isert alone does not. The
buffers are still posted first, so the initiator's first command does not
meet an empty receive queue and nothing depends on RNR flow control, and
the header and payload live in isert_conn, not in the struct iscsi_login
that iscsi_target_nego_release() frees first.
Over rxe, 400 login cycles per run, the oops appeared in 10 of 20
unpatched runs and in none of 20 runs with this patch. An
initiator that never waits is handled by the next patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs. |
