| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Remove all sysfs files on registration failure
ipmi_add_smi() creates the nr_users and nr_msgs files before trying to
create the maintenance_mode file. If that last creation fails, the error
path removes only nr_users before dropping the final reference to the
interface.
Remove nr_msgs as well so no sysfs attribute embedded in the freed
interface remains registered. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: hold a reference to the route device in mctp_route_lookup()
mctp_route_lookup() uses rt->dev without holding a reference on it.
mctp_route_lookup_single() returns the route under RCU only, so the
route's device can be torn down concurrently: mctp_dev_put() drops the
last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr()
then reads rt->dev->addrs[0], giving a use-after-free reachable by an
unprivileged local AF_MCTP user on the receive/forwarding path (no
CAP_NET_RAW required):
BUG: KASAN: slab-use-after-free in mctp_route_lookup
Read of size 1 at addr ... by task mctp_uaf/...
mctp_route_lookup
mctp_pkttype_receive
Freed by task ...:
kfree
mctp_dev_put
mctp_dev_notify
In the same window mctp_dst_from_route() -> mctp_dev_hold() also
increments a refcount that has already reached zero
("refcount_t: addition on 0 ... mctp_dev_hold").
This reintroduces the use-after-free class of CVE-2023-3439: the source
address lookup was moved ahead of the point where the destination takes
its device reference.
Take a reference with refcount_inc_not_zero() before touching rt->dev,
skip a device that is already dead, and drop the reference once the
destination has taken its own. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix use-after-free of the LLC qentry in smc_llc_srv_add_link()
smc_llc_srv_add_link() keeps add_llc pointing into the queue entry:
add_llc = &qentry->msg.add_link; smc_llc.c:1482
...
smc_llc_save_add_link_info(link_new, add_llc); smc_llc.c:1494
smc_llc_flow_qentry_del(&lgr->llc_flow_lcl); smc_llc.c:1495
...
u8 *llc_msg = smc_link_shared_v2_rxbuf(link) ?
(u8 *)lgr->wr_rx_buf_v2 : (u8 *)add_llc; smc_llc.c:1504
smc_llc_save_add_link_rkeys(link, link_new, llc_msg); smc_llc.c:1506
smc_llc_flow_qentry_del() kfree()s the entry, so on a link without a shared
v2 receive buffer the pointer handed to smc_llc_save_add_link_rkeys() is
already freed. Before the Fixes: commit that branch always used
lgr->wr_rx_buf_v2 and add_llc was not used after the free.
Reproduced on an unpatched tree over rxe, with KASAN, kasan_multi_shot
and a link forced to max_recv_sge == 1: the entry is freed and read by
the same call, and the freeing frame is smc_llc_srv_add_link() itself.
[ 2.523161] BUG: KASAN: slab-use-after-free in smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523499] Read of size 2 at addr ffff8880052194de by task kworker/0:1/11
[ 2.523789]
[ 2.523862] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5-p0-g2c9dd296545d #35 PREEMPT(lazy)
[ 2.523865] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.523866] Workqueue: smc_hs_wq smc_listen_work
[ 2.523869] Call Trace:
[ 2.523870] <TASK>
[ 2.523871] dump_stack_lvl+0x53/0x70
[ 2.523872] print_report+0xd0/0x630
[ 2.523874] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.523876] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523878] kasan_report+0xce/0x100
[ 2.523879] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523881] smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523883] ? smcr_buf_reg_lgr+0x2a4/0x660
[ 2.523885] smc_llc_srv_add_link+0xaa2/0x1e50
[ 2.523888] ? _printk+0xba/0xf0
[ 2.523897] ? __pfx_smc_llc_srv_add_link+0x10/0x10
[ 2.523899] ? down_write+0xb0/0x130
[ 2.523903] ? __pfx_down_write+0x10/0x10
[ 2.523905] smc_listen_work+0x489e/0x4d00
[ 2.523907] ? kmem_cache_free+0x1c6/0x3a0
[ 2.523911] ? __pfx_smc_listen_work+0x10/0x10
[ 2.523913] ? release_sock+0x148/0x1d0
[ 2.523915] ? smc_tcp_listen_work+0xb4f/0xfc0
[ 2.523917] ? _raw_spin_lock_irq+0x80/0xe0
[ 2.523918] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 2.523920] process_one_work+0x633/0x1030
[ 2.523922] ? assign_work+0x11d/0x370
[ 2.523924] worker_thread+0x45b/0xd10
[ 2.523926] ? __pfx_worker_thread+0x10/0x10
[ 2.523928] ? __pfx_worker_thread+0x10/0x10
[ 2.523929] kthread+0x2c6/0x3b0
[ 2.523931] ? recalc_sigpending+0x15c/0x1e0
[ 2.523934] ? __pfx_kthread+0x10/0x10
[ 2.523935] ret_from_fork+0x36e/0x5a0
[ 2.523937] ? __pfx_ret_from_fork+0x10/0x10
[ 2.523938] ? __switch_to+0x572/0xdd0
[ 2.523943] ? __pfx_kthread+0x10/0x10
[ 2.523944] ret_from_fork_asm+0x1a/0x30
[ 2.523947] </TASK>
[ 2.523948]
[ 2.531253] Allocated by task 48:
[ 2.531399] kasan_save_stack+0x33/0x60
[ 2.531570] kasan_save_track+0x14/0x30
[ 2.531737] __kasan_kmalloc+0x8f/0xa0
[ 2.531905] __kmalloc_cache_noprof+0x158/0x370
[ 2.532100] smc_llc_enqueue+0x72/0x560
[ 2.532268] smc_wr_rx_tasklet_fn+0x474/0xa80
[ 2.532491] tasklet_action_common+0x20f/0x8a0
[ 2.532714] handle_softirqs+0x18e/0x590
[ 2.532886] do_softirq+0x3b/0x60
[ 2.533036] __local_bh_enable_ip+0x61/0x70
[ 2.533221] __alloc_skb+0x732/0x890
[ 2.533384] rxe_init_packet+0x16b/0x4f0
[ 2.533567] prepare_ack_packet+0xb8/0x830
[ 2.533760] rxe_receiver+0x495/0x96e0
[ 2.533933] do_work+0x144/0x470
[ 2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: fix use-after-free and invalid seg operations in kset_replay()
In kset_replay, when key->seg_gen is stale (key->seg_gen <
key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then
key->cache_pos.cache_seg is accessed as the argument to cache_seg_get().
This is a use-after-free on the freed key memory. Although mempool
recycled memory is not immediately reclaimed or overwritten in practice,
this is still a potential UAF bug.
Additionally, for expired invalid keys, setting the cache->seg_map bit
and calling cache_seg_get() is unreasonable since the corresponding
segment data is no longer valid.
Fix both issues by moving cache_seg_get() and __set_bit() after the
gen check, so they only execute for valid keys, and using continue to
skip invalid keys. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: renesas: Check that the transfer is valid before accessing it
The Renesas I3C driver uses an asynchronous model to transfer data. It
prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion.
The interrupt handler dequeues the transfer, updates/uses it, and signals
the waiting thread.
If the completion times out, the waiting thread dequeues the transfer and
free it. If an interrupt fires after that, the handler may access freed
memory, leading to crashes.
Check that the transfer is still valid before accessing it in the
interrupt handler. With it clear any status flags and disable all
the interrupts to avoid triggering the same interrupts again. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: thunderbolt: Disable work before freeing tbt on remove
tbt_altmode_remove() drops the plug and cable references without
draining tbt->work. The work function dereferences those references,
and can also requeue itself in its error path. The VDM callbacks can
queue the same work item.
Disable and drain tbt->work before dropping the references. This waits
for an existing invocation and prevents subsequent schedule_work()
calls from queueing it during teardown.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent post-shutdown use-after-free in unlock_filesystem
Writing a filesystem path to /proc/fs/nfsd/unlock_filesystem runs
nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before the
handler confirms that nn->nfsd_serv is set. Once nfsd has shut down,
nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the
pointer intact, so the cancel helper iterates freed slab memory as an
array of struct list_head and then dereferences a bogus nfs4_client
when it takes clp->async_lock. A local administrator holding
CAP_SYS_ADMIN can reach this use-after-free by stopping the server and
then writing to unlock_filesystem; KASAN reports a slab-use-after-free
read in nfsd4_cancel_copy_by_sb().
nfsd4_revoke_states() walks the same state tables and for that reason
already runs only under nfsd_mutex with nn->nfsd_serv confirmed
present. Move the async COPY cancel into that protected section so
every NFSv4 state-table walker on this path observes a running server.
Async copies exist only while the server runs, so gating the cancel on
nn->nfsd_serv loses nothing. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users
scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from
run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru
runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and
hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip.
tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID
check and the BUG_ON would leave a window where destroy_dsq() can
invalidate the id between the two reads and still trigger the BUG_ON. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Fix use-after-free of event IRQs during teardown
plda_pcie_irq_domain_deinit() removes pcie->event_domain via
irq_domain_remove(), but the per-event IRQs mapped from that domain
are requested with devm_request_irq() in plda_init_interrupts(). The
actual free_irq() for a devm-managed IRQ is deferred by devres until
after the calling probe()/remove() function returns.
This means irq_domain_remove() can free the domain's internal data
before the deferred free_irq() for IRQs still mapped into it has run.
When devres later processes that deferred cleanup, it can end up
dereferencing the already-freed domain.
Free each event IRQ explicitly with devm_free_irq() before removing
the domain. This triggers the free immediately and removes the IRQ
from the devres tracking list, so devres will not attempt to free it
a second time later.
Also dispose of the event, INTx, and MSI IRQ mappings with
irq_dispose_mapping() before their owning domains are removed.
Finally, guard the calls to irq_set_chained_handler_and_data() for
pcie->irq, pcie->msi_irq, and pcie->intx_irq so they only run when
those fields hold a valid (>0) IRQ number.
This is a pre-existing issue, flagged by automated review during work
on an earlier, unrelated patch to this driver.
Build-tested and boot-tested on StarFive VisionFive v1.2A board |
| Ladybird before commit 2f9dc7e contains a dangling-reference memory-safety flaw in its WebAssembly ESM-integration module loader. When a JavaScript function is imported into a WebAssembly module via the ESM path, WebAssemblyModule.cpp passes a stack-local Wasm::FunctionType by reference to create_host_function, whose host callback captures and later reads that reference; once the ESM link-loop iteration ends the FunctionType is destroyed, leaving the callback with a dangling reference (the normal instantiate path uses a long-lived reference and is not affected). Stale result-type data lets the host callback return an empty result vector for a statically non-empty result, so the destination register retains an attacker-influenced value that is then consumed by the WASM-GC array.set handler, which bit-casts the reference low bits to an ArrayInstance pointer after only a null check, yielding an arbitrary write. A web page can chain this into code execution in the WebContent process. Verified reachable from HTML content without any instrumentation or source modification. |
| Issue summary: A specially crafted PKCS#7 or S/MIME signed message could
trigger a use-after-free during PKCS#7 signature verification.
Impact summary: A use-after-free may result in process crashes, heap
corruption, or potentially remote code execution.
When processing a PKCS#7 or S/MIME signed message, if the SignedData
digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may
incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent
use of the BIO by the calling application results in a use-after-free
condition.
In the common case this occurs when the application later calls
BIO_free() on the BIO originally passed to PKCS7_verify(). Depending
on allocator behavior and application-specific BIO usage patterns, this
may result in a crash or other memory corruption. In some application
contexts this may potentially be exploitable for remote code execution.
Applications that process PKCS#7 or S/MIME signed messages using OpenSSL
PKCS#7 APIs may be affected. Applications using the CMS APIs for this
processing are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| A vulnerability was found in DaveGamble cJSON up to 1.7.19. The affected element is the function cJSONUtils_MergePatch of the file cJSON_Utils.c. The manipulation results in use after free. The attack may be launched remotely. The exploit has been made public and could be used. The pull request to fix this issue awaits acceptance. |
| Use after free in Platform in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Chromecast in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| ImageMagick before 7.1.2-30 and 6.9.x before 6.9.13-55 contains a heap-use-after-free vulnerability in the Layer method of PerlMagick. An attacker who supplies a crafted list of images can trigger memory access after deallocation, resulting in a crash (denial of service). |
| Use after free in Skia in Google Chrome prior to 152.0.7977.82 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| ImageMagick before 7.1.2-30 and 6.9.x before 6.9.13-55 contains a heap-use-after-free vulnerability in the GetList method of PerlMagick. A crafted call to the GetList method can trigger the use-after-free, resulting in a crash (denial of service). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: letsketch: fix UAF on inrange_timer at driver unbind
letsketch_driver does not provide a .remove callback, but
letsketch_probe() arms a per-device timer:
timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0);
The timer is re-armed from letsketch_raw_event() with a 100 ms
timeout on every pen-in-range report, and its callback dereferences
data->input_tablet to deliver a synthetic BTN_TOOL_PEN release.
letsketch_data is allocated with devm_kzalloc(), and its input_dev
fields are devm-allocated via letsketch_setup_input_tablet(). On
device unbind (USB unplug or rmmod), the HID core runs its default
teardown and devm cleanup frees both letsketch_data and the input
devices. Because no .remove callback exists, nothing drains the
timer first: if raw_event armed it within ~100 ms of the unbind,
the pending timer fires on freed memory. This is a UAF read of
data and of data->input_tablet, followed by input_report_key() /
input_sync() into the freed input_dev.
The same problem can occur on the probe error path: if
hid_hw_start() enabled I/O on an always-poll-quirk device and then
failed, raw_event may have armed the timer before devm releases
data.
Fix by adding a .remove callback that calls hid_hw_stop() first.
hid_hw_stop() synchronously kills the URBs that deliver raw_event(),
so once it returns no path can re-arm the timer. timer_shutdown_sync()
then drains any in-flight callback and permanently disables further
mod_timer() calls. Apply the same timer_shutdown_sync() in the probe
error path so the timer is guaranteed not to outlive data. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material. |
