| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
f2fs_acl_count() only validates the aggregate ACL xattr length. A
malformed ACL can still place ACL_USER or ACL_GROUP in a slot that only
contains struct f2fs_acl_entry_short bytes, and f2fs_acl_from_disk()
then reads entry->e_id before verifying that a full entry fits.
Require a short entry before reading e_tag and e_perm, and require a
full entry before reading e_id for ACL_USER and ACL_GROUP. Return
-EFSCORRUPTED from these new truncated-entry checks, while keeping the
pre-existing -EINVAL paths unchanged.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in __f2fs_get_acl+0x6fb/0x7e0
RIP: 0033:0x7f4b835ea7aa
The buggy address belongs to the object at ffff888114589960 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 8-byte
region [ffff888114589960, ffff888114589968)
Read of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
__f2fs_get_acl+0x6fb/0x7e0 (fs/f2fs/acl.c:169)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x224/0x430 (?:?)
kasan_report+0xe0/0x110 (?:?)
__f2fs_get_acl+0x5/0x7e0 (fs/f2fs/acl.c:169)
__get_acl+0x281/0x380 (?:?)
vfs_get_acl+0x10b/0x190 (?:?)
do_get_acl+0x2a/0x410 (?:?)
do_get_acl+0x9/0x410 (?:?)
do_getxattr+0xe8/0x260 (?:?)
filename_getxattr+0xd1/0x140 (?:?)
do_getname+0x2d/0x2d0 (?:?)
path_getxattrat+0x16c/0x200 (?:?)
lock_release+0xc8/0x290 (?:?)
cgroup_update_frozen+0x9d/0x320 (?:?)
lockdep_hardirqs_on_prepare+0xea/0x1a0 (?:?)
trace_hardirqs_on+0x1a/0x170 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix nx_crypto_ctx_exit argument
nx_crypto_ctx_shash_exit calls nx_crypto_ctx_exit with crypto_shash_ctx(...)
but crypto_shash_ctx gives a nx_crypto_ctx *, not a crypto_tfm *.
Fix the type in nx_crypto_ctx_exit and drop the bogus crypto_tfm_ctx
call.
This fixes the following oops:
BUG: Unable to handle kernel data access at 0xc0403effffffffc8
Faulting instruction address: 0xc000000000396cb4
Oops: Kernel access of bad area, sig: 11 [#15]
Call Trace:
nx_crypto_ctx_shash_exit+0x24/0x60
crypto_shash_exit_tfm+0x28/0x40
crypto_destroy_tfm+0x98/0x140
crypto_exit_ahash_using_shash+0x20/0x40
crypto_destroy_tfm+0x98/0x140
hash_release+0x1c/0x30
alg_sock_destruct+0x38/0x60
__sk_destruct+0x48/0x2b0
af_alg_release+0x58/0xb0
__sock_release+0x68/0x150
sock_close+0x20/0x40
__fput+0x110/0x3a0
sys_close+0x48/0xa0
system_call_exception+0x140/0x2d0
system_call_common+0xf4/0x258
.. which came from hardlink(1) opportunistically using AF_ALG.
The same problem exists with nx_crypto_ctx_skcipher_exit getting a context
it wasn't expecting, but apparently nobody hit that for years. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path
In mm_cid_fixup_cpus_to_tasks(), when rq->curr has the target mm and
mm_cid.active is set, the CID is checked with cid_in_transit() before
setting the transition bit. In per-CPU mode a newly forked or exec'd
task can be running with mm_cid.cid == MM_CID_UNSET because CIDs are
assigned lazily on schedule-in. With cid_in_transit() the guard passes
for MM_CID_UNSET (no transit bit), converts it to MM_CID_UNSET |
MM_CID_TRANSIT and stores it back; later mm_cid_schedout() feeds this
to clear_bit() with MM_CID_UNSET as the bit number, triggering an
out-of-bounds write.
Symptoms: this is genuine memory corruption, but a bounded out-of-bounds
write, not an arbitrary one. MM_CID_UNSET is the fixed sentinel BIT(31),
so once the bad value reaches mm_cid_schedout() the cid_from_transit_cid()
strip leaves MM_CID_UNSET, which fails the "cid < max_cids" convergence
test and falls into mm_drop_cid() -> clear_bit(MM_CID_UNSET,
mm_cidmask(mm)). The cid bitmap is embedded in the mm_struct slab object
(after cpu_bitmap and mm_cpus_allowed) and is only num_possible_cpus()
bits wide, so clearing bit 31 is a deterministic OOB bit-clear at a
fixed offset of 2^31 / 8 == 256 MiB past the bitmap base. The address is
not attacker-influenced (fixed sentinel -> fixed offset) and the op only
clears a single bit; what sits 256 MiB further along the direct map is
whatever kernel object happens to live there, so this corrupts one bit of
unpredictable kernel memory -- it is not an arbitrary-address or
arbitrary-value write.
It triggers only in per-CPU CID mode, when a CPU is running an active
task of the target mm whose cid is still MM_CID_UNSET -- the
fork()/execve() window before that task's next schedule-in assigns it a
real CID -- and a per-CPU -> per-task fixup walks over it (the mode
fallback driven by a thread exit, sched_mm_cid_exit(), or by the deferred
max_cids recompute in mm_cid_work_fn()).
In practice syzkaller surfaced it as a KASAN use-after-free reported in
__schedule -> mm_cid_switch_to, where the offending clear_bit() is inlined
via mm_cid_schedout() -> mm_drop_cid().
Guard the transition-bit assignment against MM_CID_UNSET, in addition to
the existing cid_in_transit() check, so the bit is only set on a genuine
task-owned CID. A CPU-owned (MM_CID_ONCPU) CID of a running active task
is handled by the cid_on_cpu(pcp->cid) branch above and never reaches
this path, so excluding MM_CID_UNSET (and the already-transitioning case)
is sufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: serialize volume label accesses
Protect vol->volume_label with a mutex and snaphost the label before
copy_to_user. This prevent a use-after-free when FS_IOC_SETFSLABEL
replaces the vol->volume_label and FS_IOC_GETTSLABEL reads it
concurrently. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix posix_acl leak and ignored error in nfsd4_create_file
nfsd4_create_file() has two bugs in its ACL handling:
The return value of nfsd4_acl_to_attr() is silently discarded. When
the NFSv4-to-POSIX ACL conversion fails (e.g., -EINVAL for
unsupported ACE types), the file is created without any ACL and the
client receives NFS4_OK. This violates RFC 7530/8881 which require
the server to reject unsupported attributes on CREATE.
When start_creating() fails after ACL attributes have been populated
in attrs (either via nfsd4_acl_to_attr or via ownership transfer from
open->op_dpacl/op_pacl), the function jumps to out_write which skips
nfsd_attrs_free(). The posix_acl allocations are leaked. A client
can trigger this repeatedly with OPEN(CREATE), ACL attributes, and an
invalid filename (e.g., longer than NAME_MAX).
Fix both by capturing the nfsd4_acl_to_attr() return value and by
changing the early error paths to jump to out instead of out_write.
Initialize child to ERR_PTR(-EINVAL) so that end_creating() is safe
to call even if start_creating() was never reached. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix dead ACL conflict guard in nfsd4_create
nfsd4_create() steals create->cr_dpacl/cr_pacl into the local
nfsd_attrs via the designated initializer, then immediately sets the
source pointers to NULL. The subsequent conflict guard tests the
already-nilled source fields, making it permanently dead code:
if (create->cr_acl) {
if (create->cr_dpacl || create->cr_pacl) /* always false */
When a client encodes both FATTR4_WORD0_ACL and
FATTR4_WORD2_POSIX_{DEFAULT,ACCESS}_ACL in the same CREATE fattr
bitmap, nfsd4_acl_to_attr() overwrites attrs.na_pacl/na_dpacl without
releasing the originals, leaking two posix_acl slab objects per
request. Repeated requests cause unbounded slab exhaustion.
Fix by checking attrs.na_dpacl/na_pacl (the stolen values) instead of
the nilled create->cr_dpacl/cr_pacl, matching the correct pattern
already used in nfsd4_setattr(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-ao: fix use-after-free of key in del_async path
In tcp_ao_delete_key(), the del_async path skips the current_key
and rnext_key validity checks present in the synchronous path,
assuming these pointers are always NULL on LISTEN sockets. However,
if a key was added with set_current=1/set_rnext=1 while the socket
was in CLOSE state, current_key and rnext_key will be non-NULL
after listen() transitions the socket to LISTEN.
When such a key is deleted with del_async=1, hlist_del_rcu() and
call_rcu() free the key without clearing the dangling pointers.
After the RCU grace period, getsockopt(TCP_AO_INFO) dereferences
current_key->sndid and rnext_key->rcvid from freed slab memory.
Clear current_key and rnext_key in the del_async path when they
reference the key being deleted. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: veml6075: add bounds check to veml6075_it_ms index
veml6075_it_ms has 5 elements but VEML6075_CONF_IT can yield values 0-7.
If it returns a value >= 5, this causes an out-of-bounds array access.
Add a bounds check and return -EINVAL if the index is out of range.
The problem values are reserved so should never be read from the
register. Hence this is hardening against fault device, missprogramming
or bus corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1298: add bounds check to pga_settings index
ads1298_pga_settings has 7 elements but ADS1298_MASK_CH_PGA can yield
values 0-7. If it yields a value >= 7, this causes an out-of-bounds
array access. Add a bounds check and return -EINVAL if the index
is out of range.
Note that the remaining value b111 is reserved so should not be seen
in a correctly functioning system. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject non-VALID session in compound request branch
smb2_check_user_session() takes a shortcut for any operation that is not
the first in a COMPOUND request: it reuses work->sess (the session bound by
the first operation) and validates only the SessionId, then returns
"valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a
SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation
value) skips even the id comparison. The standalone path
(ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does
enforce the VALID state; the compound branch bypasses all of it.
A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes
a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL
(->user is assigned later, by ntlm_authenticate()). Used as operation 1 of
a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX,
\\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and
reaches ksmbd_ipc_tree_connect_request(), which dereferences
user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704)
-> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd
worker for all clients.
Reject any non-first compound operation that lands on a session which is
not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path
enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session,
but it is never carried as a non-first compound operation, so multi-leg
authentication is unaffected by this check. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rzv2h-ivc: Fix concurrent buffer list access
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
[assign ivc->buffers.curr in critical section as reported by Barnabas] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
The mmap_prepare hook functionality includes the ability to invoke
mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is
ones which are capable of calling the mmap hooks of other drivers/file
systems (e.g. overlayfs, shm).
As part of the mmap_prepare action functionality, we deal with errors by
unmapping the VMA should one arise. This works in the usual mmap_prepare
case, as we invoke this action at the last moment, when the VMA is
established in the maple tree.
However, the mmap() hook passes a not-fully-established VMA pointer to the
caller (which is the motivation behind the mmap_prepare() work), which is
detached.
So attempting to unmap a VMA in this state will be problematic, with the
most obvious symptom being a warning in vma_mark_detached(), because the
VMA is already detached.
It's also unncessary - the mmap() handler will clean up the VMA on error.
So to fix this issue, this patch propagates whether or not an mmap action
is being completed via the compatibility layer or directly.
If the former, then we do not attempt VMA cleanup, if the latter, then we
do.
This patch also updates the userland VMA tests to reflect the change. |
| A security flaw has been discovered in nextlevelbuilder GoClaw up to 3.13.2. Affected by this vulnerability is the function extractBin/RequestApproval/matchesAllowlist of the file internal/tools/exec_approval.go. The manipulation results in incorrect authorization. The exploit has been released to the public and may be used for attacks. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.73.24 and 6.20.1, form submission values in src/Forms/Exporters/CsvExporter.php were not neutralized for spreadsheet formula characters when exported to CSV. A submission containing a value beginning with a formula trigger character, such as =, +, -, or @, could be interpreted as a live formula when a Control Panel user opens the export in a spreadsheet application. Form submissions can come from unauthenticated front-end visitors, so the malicious value can be supplied by an anonymous user and is later triggered by an editor opening the export. This issue is fixed in versions 5.73.24 and 6.20.1. |
| IBM Langflow OSS 1.0.0 through 1.10.0 allows an authenticated attacker to read arbitrary files including the JWT signing key and forge authentication tokens for any user. |
| A security flaw has been discovered in zevorn rt-claw up to 0.2.0. This impacts the function receiver_thread of the file claw/services/swarm/swarm.c of the component http_request. Performing a manipulation results in server-side request forgery. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| IBM Langflow OSS 1.0.0 through 1.10.1 Langflow could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input in the Python Interpreter component. |
| Remote command execution vulnerability in SE-elektronic GmbH E-DDC3.3 affecting versions 03.07.03 and higher. An attacker could send different commands from the operating system to the system via the web configuration functionality of the device. |
| A vulnerability has been found in CartoDB carto-api-client 0.5.29. This impacts the function addFilter of the file src/filters.ts. Such manipulation of the argument column leads to improperly controlled modification of object prototype attributes. The attack can be executed remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| IBM Langflow OSS 1.0.0 through 1.10.0 could allow a remote attacker to gain unauthorized access due to improper authentication in the /api/v1/login/auto_login endpoint. The endpoint issues long-lived superuser bearer tokens without requiring authentication when the AUTO_LOGIN configuration is enabled (enabled by default), which may allow an unauthenticated network attacker to obtain full administrative access. Additionally, permissive cross-origin resource sharing (CORS) settings may allow tokens to be exposed to unintended origins, increasing the risk of unauthorized access. |
