| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Properly mark live registers for indirect jumps
For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix locking usage for tcon fields
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb);
}
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix freemap adjustments when adding xattrs to leaf blocks
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation
Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption
When decrypting data that is not in-place (src != dst), there is
no need to save the high-order sequence bits in dst as it could
simply be re-copied from the source.
However, the data to be hashed need to be rearranged accordingly.
Thanks, |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix regsafe() for pointers to packet
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs()
sqe->len is __u32 but gets stored into sr->len which is int. When
userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF),
sr->len overflows to a negative value. This negative value propagates
through the bundle recv/send path:
1. io_recv(): sel.val = sr->len (ssize_t gets -1)
2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets
0xFFFFFFFFFFFFFFFF)
3. io_ring_buffers_peek(): buf->len is not clamped because max_len
is astronomically large
4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs()
5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1,
causing ret to increase instead of decrease, creating an
infinite loop that reads past the allocated iov[] array
This results in a slab-out-of-bounds read in io_bundle_nbufs() from
the kmalloc-64 slab, as nbufs increments past the allocated iovec
entries.
BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160
Read of size 8 at addr ffff888100ae05c8 by task exp/145
Call Trace:
io_bundle_nbufs+0x128/0x160
io_recv_finish+0x117/0xe20
io_recv+0x2db/0x1160
Fix this by rejecting negative sr->len values early in both
io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32,
any value > INT_MAX indicates overflow and is not a valid length. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - Add missing CRYPTO_ALG_ASYNC
The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its
asynchronous algorithms, causing the crypto API to select them for users
that request only synchronous algorithms. This causes crashes (at
least). Fix this by adding the flag like what the other drivers do.
Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just
get ignored and overridden by the registration function anyway. |
| Nix before 2.35.3 and Lix before 2.95.4 allow privilege escalation via a repair operation because it could destroy and then replace a store path before content verification. |
| A vulnerability was detected in antoinersx clawhost up to 0.0.45. This affects the function handleRequest of the file apps/clawhostgo/src/main/services/reverseProxy.ts of the component Reverse Proxy. Performing a manipulation of the argument token results in open redirect. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The SCIM endpoint does not sufficiently validate authorization for federated users when performing operations against the local user store. This occurs when a local and a federated user share the same username, allowing a federated user to perform actions intended for a local user, including arbitrary operations.
A malicious actor authenticated as a federated user may perform arbitrary operations on local user accounts via the SCIM 2.0 or SCIM 1.1 endpoints when local and federated users share the same username. This could lead to user account takeover. Deployments that do not support user self-registration are considered medium severity. |
| Frappe Helpdesk before 1.26.0 contains an authorization bypass vulnerability that allows authenticated portal users to create tickets impersonating other customers by supplying a raised_by value. Attackers can call the hd_ticket.api.new endpoint with a victim's email to plant phishing tickets in their portal and read their replies via get_ticket_activities. |
| FlyCms through commit edfdf724 contains a missing authorization vulnerability in ActionService.counter() that allows authenticated users to modify other users' content rows because checkRowOwner never verifies ownership. Any registered user can send requests to /ucenter/action/{modelCode}/{id}/counter or /ucenter/action/compose to add arbitrary deltas to numeric fields like price, stock, or points. |
| An uncontrolled recursion weakness in the BSON decoding logic of the MongoDB PHP driver may allow an unauthenticated party who can supply crafted binary document data to the decoder to exhaust the process stack. This may cause the PHP process using the driver to terminate unexpectedly, resulting in a loss of availability for that process. The condition occurs below the PHP layer and cannot be intercepted by application-level error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: some missing initializations on replay
In several places in the code, we have a label to signify
the start of the code where a request can be replayed if
necessary. However, some of these places were missing the
necessary reinitializations of certain local variables
before replay.
This change makes sure that these variables get initialized
after the label. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: uinput - fix circular locking dependency with ff-core
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix possible deadlock between unlink and dio_end_io_write
ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem,
while in ocfs2_dio_end_io_write, it acquires these locks in reverse order.
This creates an ABBA lock ordering violation on lock classes
ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and
ocfs2_file_ip_alloc_sem_key.
Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem):
ocfs2_unlink
ocfs2_prepare_orphan_dir
ocfs2_lookup_lock_orphan_dir
inode_lock(orphan_dir_inode) <- lock A
__ocfs2_prepare_orphan_dir
ocfs2_prepare_dir_for_insert
ocfs2_extend_dir
ocfs2_expand_inline_dir
down_write(&oi->ip_alloc_sem) <- Lock B
Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock):
ocfs2_dio_end_io_write
down_write(&oi->ip_alloc_sem) <- Lock B
ocfs2_del_inode_from_orphan()
inode_lock(orphan_dir_inode) <- Lock A
Deadlock Scenario:
CPU0 (unlink) CPU1 (dio_end_io_write)
------ ------
inode_lock(orphan_dir_inode)
down_write(ip_alloc_sem)
down_write(ip_alloc_sem)
inode_lock(orphan_dir_inode)
Since ip_alloc_sem is to protect allocation changes, which is unrelated
with operations in ocfs2_del_inode_from_orphan. So move
ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) Protect regulator operations with mutex
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h. |
