Export limit exceeded: 414071 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (5344 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-105481 | 1 Nodejs | 1 Nodejs | 2026-10-23 | N/A |
| A flaw in Node.js HTTP Agent connection reuse can cause a client to accept as valid a response that was sent before the client has sent the request. This is an incomplete fix of CVE-2026-48931. The guard that destroys idle keep-alive sockets when unexpected data arrives only runs when the event loop polls for I/O. If an unsolicited response has already reached the socket but has not been read yet when the socket is handed to a new request, for example because the event loop was busy with synchronous work, the guard is removed without seeing it and the data is parsed as the response to the new request. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**. | ||||
| CVE-2026-98933 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: hub: use shorter 120ms post resume hold for SS root hubs Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers an AMD platform issue. Users running Android adb report crashes after adb has been polling and waking up the USB subsystem once a second for some time. Vendors are working on a solution. Disabling USB runtime PM is one way to prevent this issue, but it is also proven that reducing the hold time to 120ms in resume also mitigates it. See Link for more details. Reducing the hold time to 120ms for the USB3 roothub is in itself a valid change and optimization, as the current 200ms is excessive: a root hub has no upstream suspended hub whose wake propagation needs to be accounted for, but still need some time for USB3 link training to complete. Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") is intended for. | ||||
| CVE-2026-99048 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production. | ||||
| CVE-2026-98994 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: statmount: read the parent of an unmounted mount under mount_lock statmount_mnt_basic() reads the ids of the parent through m->mnt_parent with namespace_sem held for reading. That's fine for a mount that is in a namespace. Everything above it is pinned by that namespace. STATMOUNT_BY_FD also accepts a file descriptor on a mount that has been unmounted on purpose and that only the file descriptor keeps alive. If that mount stayed attached to its parent when it was unmounted the parent is unmounted as well and nothing pins it for the child. The final mntput() unmounts the children under mount_lock alone and frees the parent afterwards. Concurrently, statmount_mnt_basic() reads m->mnt_parent twice while that can happen and can easily dereference a mount that's already gone. Read the parent of an unmounted mount under mount_lock. The parent can't be put while it is held and both ids come from the same mount. A mounted mount's parent is pinned by the namespace and a mount can't leave its namespace while namespace_sem is held, so the common case takes no global lock. | ||||
| CVE-2026-98753 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: tty_port: restore TTY_IO_ERROR on activation failure Make sure to restore the TTY_IO_ERROR flag if activation fails to prevent I/O attempts on a port that is gone or powered down. This specifically avoids issues like kernel panic due to unclocked accesses or NULL-pointer dereferences when accessing powered down or deregistered ports when a TTY ioctl races with hangup and open. Note that the flag is set again in tty_port_close() but not restoring it on activation failure leaves a window where drivers fail to handle the ioctl-hangup race. | ||||
| CVE-2026-98751 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: abort break signalling on hangup The break ioctls can race with hangup and end up calling into a tty driver for a device that is already gone or powered down. Drivers must handle this race, but TCSBRK and TCSBRKP should still be aborted to avoid calling back into the driver after a user-controlled timeout (possibly even after the tty has been reopened). Note that drivers should disable any break state on shutdown so just return on hangup (calling break_ctl() again is racy and will most likely fail for drivers handling the race). | ||||
| CVE-2026-98752 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: port: fix tty_port_tty_vhangup() race Drivers rely on tty_port_tty_vhangup() to synchronously hang up their ports before tearing down resources as part of deregistration (e.g. on physical disconnect). If tty_port_tty_vhangup() races with another hangup it may however return before the port has been shut down. This is in turn can lead to use-after-free and NULL-pointer dereferences in racing ioctls (including a synchronous hangup) and in processing of racing asynchronous hangups (carrier loss). Add the missing serialisation to tty_port_tty_vhangup() and tty_port_hangup() so that the former does not return until the port has been shut down also when there is a racing hangup. Note that serial core does not use tty_port_hangup(), but it already holds the port mutex when clearing port->tty and shutting down the port in uart_hangup(). | ||||
| CVE-2026-96853 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-23 | 4.7 Medium |
| Time-of-check time-of-use (toctou) race condition in Windows Win32 Kernel Subsystem allows an authorized attacker to disclose information locally. | ||||
| CVE-2026-99001 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/i2c: cancel the client work on remove xe_i2c_notifier() stores the DesignWare adapter in i2c->adapter and schedules i2c->work when the adapter is registered under the xe I2C platform device, and xe_i2c_client_work() then instantiates the AMC client device on that adapter. xe_i2c_remove() tears down the AMC, unregisters the client devices, the bus notifier and the adapter platform device, but it never drains i2c->work. A work item that is still queued or running when the adapter is unregistered dereferences i2c->adapter in i2c_new_client_device() after platform_device_unregister() has released the adapter. The work item is also embedded in the devm-allocated struct xe_i2c, so a work item still queued after the drm device devm unwind frees that allocation runs its callback on freed memory. The bus notifier is the only thing that schedules this work, and it is unregistered after the client devices. An instance that is still queued when the teardown runs can therefore write i2c->client[XE_I2C_CLIENT_AMC] while the loop is unregistering and clearing the same array, and an AMC client it instantiates late is only cleaned up by the adapter's own child sweep in i2c_del_adapter(). Move bus_unregister_notifier() in front of the client teardown loop and cancel the work right after it, so no new instance can be scheduled and a queued instance is drained before the client array is touched. A running instance still finds a live adapter, since the adapter is unregistered later. (cherry picked from commit a23f27d5ec11c3f418c5e5531eea34ccda2b5b20) | ||||
| CVE-2026-108396 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-23 | 7 High |
| Time-of-check time-of-use (toctou) race condition in Windows Modern Device Management (MDM) allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-98943 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: steam: Clean up locking This cleans up several issues with locking behavior, including RCU accesses not being guarded behind a lock. | ||||
| CVE-2026-85941 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-23 | 7 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Installer allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-99005 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Unmask interrupts only when ACTIVE is true There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206) | ||||
| CVE-2026-99015 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Serialize dead-device detachment Rebinding an HCI socket after its controller is unregistered can race monitor control replay and crash the kernel. hci_sock_bind() clears hci_pi(sk)->hdev and drops the device reference under only the socket lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for reading. Replay can observe a non-NULL hdev, then bind can clear it and drop the last reference before create_monitor_ctrl_open() reads hdev->id. This can cause a NULL pointer dereference if the pointer is reloaded, or a use-after-free if the old pointer is retained. The kernel reported: KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] RIP: 0010:create_monitor_ctrl_open+0x579/0x800 Call Trace: hci_sock_bind+0xd96/0x1190 __sys_bind+0x166/0x200 __x64_sys_bind+0x6d/0xb0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The same missing serialization lets hci_send_to_sock() select a socket for the old device and queue its frame after bind has detached the socket or installed a new binding. Take hci_sk_list.lock for writing when clearing the device pointer and resetting the socket state. This waits for existing replay and delivery readers to finish before detachment and prevents later readers from using the old binding. Keep hci_dev_put() outside the critical section because the final device release can sleep. | ||||
| CVE-2026-98897 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: don't hold ci->m_lock while waiting for a lease break ack When a cifs.ko client caches a read-handle (RH) lease via deferred close and a conflicting open arrives, ksmbd breaks the lease and waits for the acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s). __smb_break_all_levII_oplock() runs that wait while holding ci->m_lock for read. cifs.ko reacts to a handle-lease break by closing the deferred handle rather than sending a lease break acknowledgment. That close path (close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and is exactly what would wake the waiter, but it blocks on the read lock held by the waiting thread. The break is then resolved only by the 35s timeout, so xfstests generic/001 takes ~78s with leases enabled versus ~4s with oplocks only. Collect the target opinfos (each pinned with a reference) while holding ci->m_lock, then break them after releasing it, matching how smb_grant_oplock() already breaks a conflicting lease using only a reference. The reference keeps the opinfo (and its conn and lease) alive across the unlocked window, and a close racing the break is handled by the existing OPLOCK_CLOSING state check. Apply the same fix to the parent lease break paths. | ||||
| CVE-2026-98765 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: dummy-hcd: Fix wait for outstanding request completions The dummy-hcd driver emulates synchronize_irq() by waiting until its private callback_usage counter drops to 0 (with the private lock not held). This counter is incremented whenever a gadget driver callback occurs (which requires the private lock to be dropped), but not when a request completion handler is called. This is an oversight. Request completion is triggered by timer interrupts (emulating device IRQs in a real UDC), and the interrupt handlers are supposed to have completed when the synchronize_irq() emulation routine returns -- they aren't supposed to be in the middle of a completion callback. If this happens it can lead to a gadget driver's unbind routine running before all outstanding request completions have finished, maybe even allowing the gadget driver's module to be unloaded while a completion handler is still running. Fix the oversight by incrementing the callback_usage value across request completion callbacks. | ||||
| CVE-2026-70075 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-23 | 4.4 Medium |
| Time-of-check time-of-use (toctou) race condition in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to bypass a security feature locally. | ||||
| CVE-2026-99000 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix shrinker accounting double-subtraction on nested external pins xe_bo_pin_external() and xe_bo_unpin_external() support nested pins, since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count refcount rather than a boolean. However, the shrinker accounting calls xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked unconditionally on every pin_external()/unpin_external() call, instead of only on the transition into and out of the pinned state. An external BO (dma-buf) can be pinned more than once while already pinned, for example when it has multiple attachments/importers, each independently calling xe_bo_pin_external(). Each such nested pin subtracts the BO's pages from the shrinker's accounting again, even though the BO's pages were already removed from consideration by the first pin. Symmetrically, each nested unpin adds them back again before the BO is actually unpinned. This desynchronizes the shrinker's page and object counts from reality, and since they are declared as signed long but interpreted as unsigned long in xe_shrinker_count(), the underflow can turn into an enormous shrinkable/purgeable page count, causing the shrinker to be invoked excessively under memory pressure. Guard the accounting calls with the same pin-count transition checks already used to guard the pinned_link list maintenance, so accounting is only updated on the outermost pin and the final unpin. While centralizing this logic into xe_bo_account_pin()/ xe_bo_account_unpin(), also close a second, related accounting gap affecting imported dma-bufs. For an imported bo's ttm_tt, xe's ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's ttm_tt_populate() wrapper unconditionally marks the tt as populated on driver-hook success, so ttm_tt_is_populated() still reports true for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted ttm_tt_is_populated() as a proxy for "these pages are accounted for by the shrinker", and would subtract/add pages for such a tt that were never added in the first place, again underflowing the shrinker's counts. This is reachable today via xe_bo_pin_external(), and would have become newly reachable via the fb-pin path once this patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so fix it here rather than in a later patch, to avoid a commit in this series that introduces the regression before fixing it. Skip the accounting for imported bos, using the same EXTERNAL && !EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate() use to decide whether to act, via a new xe_ttm_bo_is_imported() helper (hoisted up from its only prior use site). v2: - Fix the critical issue caught by Sashiko AI review: the pin-count transition check introduced here was still bypassed by the fb-pin path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a stale pinned_link entry and a permanent shrinker accounting leak when the fb-unpin performed the true last unpin. Addressed in a separate follow-up patch in this series rather than folded in here, since it is a distinct bug with its own Fixes: tag. - Drop the unneeded local "last_unpin" variable in xe_bo_unpin_external(), restoring the original inline bo->ttm.pin_count == 1 check; it was a no-op rename not used by any of the new accounting helpers, and was going to be deleted again by the follow-up patch anyway. v3: - Exclude imported dma-bufs from the pin/unpin shrinker accounting, fixing another underflow caught by Sashiko AI review. - Add a short comment on the backup-object pin site noting it's already populated/accounted at pin time, addressing (as a false-positive clarification, no code fix needed) a separate Medium-severity accounting-leak concern also caught by Sashiko AI ---truncated--- | ||||
| CVE-2026-98924 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: avoid repeated scans in evict_inodes() We observed hung tasks when users attempted to unmount a filesystem after its disk had been removed while still in use. During device removal, fs_bdev_mark_dead() calls evict_inodes() while holding s_umount. Each time evict_inodes() drops s_inode_list_lock to reschedule, it restarts the walk from the head of s_inodes. With many referenced inodes at the head of the list, these restarts repeatedly scan the same inodes without reclaiming them. This can keep s_umount held for a long time, blocking concurrent umount attempts and triggering hung-task reports. Keep the current inode, already marked I_FREEING, out of the disposal batch until s_inode_list_lock is reacquired. Resume the walk from this inode and dispose of it in a later batch or at the end of the walk. The zero-refcount and state checks under i_lock allow this walker to claim the inode by setting I_FREEING and removing it from the LRU. Other reclaimers skip the inode, leaving this walker responsible for eviction. Only evict() removes it from s_inodes, so keeping it out of the disposal batch ensures that it remains on the list while the lock is dropped. After reacquiring the lock, reading its current next pointer accounts for concurrent removal of following inodes. The existing inode lifetime rules prohibit acquiring a reference to an inode marked I_FREEING or I_WILL_FREE. __iget() requires its caller to hold i_lock and establish that taking a reference is valid. Inode lookup and igrab() check these flags under i_lock when acquiring a reference from zero. ihold() requires an existing reference, which would keep i_count nonzero and prevent this walker from claiming the inode. These rules already allow iput_final() and the inode shrinker to release i_lock after setting I_FREEING and before eviction completes. A temporary __iget() reference would also keep the inode on the list, but its release must preserve last-reference handling. Another user can acquire a reference, update lazy timestamps and drop its reference while the pin is held. If the pin becomes the last reference, dropping it with atomic_dec_and_test() and evicting directly bypasses iput()'s lazytime handling and can lose those timestamp updates. Releasing the pin with iput() preserves that handling, but does not guarantee eviction. fs_bdev_mark_dead() runs with SB_ACTIVE set, so iput() may retain the inode in cache, whereas evict_inodes() must evict eligible zero-reference inodes. The inode may also have been freed when iput() returns, so the walker cannot then use it to force eviction. Using I_FREEING preserves the existing eviction behavior without introducing an additional last-reference transition. The xfstests auto group passed on ext4 and XFS with known unrelated failures excluded. No new issues were observed, and the previously reproducible hung task no longer occurs with this patch. | ||||
| CVE-2026-98938 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust: irq: pass RegistrationInner as cookie to request_irq With commit ba268514ea14 ("rust: devres: fix race condition due to nesting"), Devres::new() returns Result<Self> by value instead of initializing in-place via PinInit. Because request_irq() is called inside Devres::new(), registration.inner is still uninitialized when the IRQ is enabled, so accessing registration.inner.device() in the IRQ callback can read uninitialized memory. Fix this by storing the Device and handler pointer in RegistrationInner and passing RegistrationInner as the IRQ cookie after its fields are initialized. This is not needed in mainline because commit 98c63ce4d760 ("rust: irq: make Registration compatible with lifetime-bound drivers") removed Devres from irq::Registration and moved request_irq() after all fields are initialized. | ||||