| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ipc response length before dereferencing its fields
ipc_validate_msg() computes the expected message size by reading length
fields out of the response buffer supplied by the userspace ksmbd daemon
(payload_sz, session_key_len, ngroups, ...). Those fields are read before
the buffer is verified to be large enough to contain the struct they belong
to, so a short response makes the read land past the end of the allocation.
handle_response() sizes entry->response purely from the netlink attribute
length (nla_len()) and only guards the leading handle read, so the daemon
can install a response as small as the kmalloc-8 object seen below. When
ipc_msg_send_request() then calls ipc_validate_msg() for a
KSMBD_EVENT_RPC_REQUEST, the cast to struct ksmbd_rpc_command reads
resp->payload_sz at offset 8 of an 8-byte allocation:
[ 3697.841381] ==================================================================
[ 3697.844099] BUG: KASAN: slab-out-of-bounds in ipc_msg_send_request+0x763/0x800
[ 3697.846604] Read of size 4 at addr ffff888105f95910 by task kworker/4:3/20682
[ 3697.849061]
[ 3697.849801] CPU: 4 UID: 0 PID: 20682 Comm: kworker/4:3 Not tainted 7.2.0-rc3-next-20260717-virtme #117 PREEMPT(lazy)
[ 3697.850077] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 3697.850303] Workqueue: ksmbd-io handle_ksmbd_work
[ 3697.850592] Call Trace:
[ 3697.850794] <TASK>
[ 3697.850952] __dump_stack+0x21/0x60
[ 3697.851239] dump_stack_lvl+0xc2/0x100
[ 3697.851528] print_address_description+0x77/0x200
[ 3697.851816] ? ipc_msg_send_request+0x763/0x800
[ 3697.852024] print_report+0x58/0x70
[ 3697.852316] kasan_report+0x117/0x150
[ 3697.852585] ? down_write+0x146/0x1f0
[ 3697.852809] ? ipc_msg_send_request+0x763/0x800
[ 3697.853082] ipc_msg_send_request+0x763/0x800
[ 3697.853385] ? __pfx_ipc_msg_send_request+0x10/0x10
[ 3697.853604] ? kasan_unpoison+0x48/0x70
[ 3697.853936] ? __pfx___up_read+0x10/0x10
[ 3697.854221] ksmbd_rpc_ioctl+0x380/0x520
[ 3697.854542] ? __pfx_ksmbd_rpc_ioctl+0x10/0x10
[ 3697.854757] ? kasan_unpoison+0x48/0x70
[ 3697.854962] ? copy_from_kernel_nofault+0x32c/0x4e0
[ 3697.855166] ? kasan_unpoison+0x48/0x70
[ 3697.855416] fsctl_pipe_transceive+0x139/0x7a0
[ 3697.855705] ? __pfx_copy_from_kernel_nofault+0x10/0x10
[ 3697.855937] ? __pfx_fsctl_pipe_transceive+0x10/0x10
[ 3697.856388] ? __sanitizer_cov_trace_switch+0x7b/0x140
[ 3697.856620] smb2_ioctl+0x1141/0x3420
[ 3697.856994] ? __pfx_smb2_ioctl+0x10/0x10
[ 3697.857182] ? get_smb2_cmd_val+0xe3/0x1c0
[ 3697.857655] handle_ksmbd_work+0x9ad/0x15e0
[ 3697.858034] ? __pfx_handle_ksmbd_work+0x10/0x10
[ 3697.858251] ? lock_release+0xf7/0x360
[ 3697.858466] ? process_scheduled_works+0x954/0x1600
[ 3697.858698] ? process_scheduled_works+0x954/0x1600
[ 3697.858905] process_scheduled_works+0xc22/0x1600
[ 3697.859368] ? __pfx_process_scheduled_works+0x10/0x10
[ 3697.859637] ? __pfx_assign_work+0x10/0x10
[ 3697.859896] ? lock_is_held_type+0x7b/0x110
[ 3697.860146] worker_thread+0x975/0xee0
[ 3697.860524] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 3697.860830] ? __kthread_parkme+0x21e/0x260
[ 3697.861105] kthread+0x3a6/0x490
[ 3697.861423] ? __pfx_worker_thread+0x10/0x10
[ 3697.861643] ? __pfx_kthread+0x10/0x10
[ 3697.861878] ret_from_fork+0x55a/0xa20
[ 3697.862194] ? __pfx_ret_from_fork+0x10/0x10
[ 3697.862480] ? __pfx_kthread+0x10/0x10
[ 3697.862714] ret_from_fork_asm+0x1a/0x30
[ 3697.862965] </TASK>
[ 3697.863039]
[ 3697.938882] Allocated by task 20761:
[ 3697.940257] kasan_save_track+0x3e/0x80
[ 3697.941782] __kasan_kmalloc+0x72/0x90
[ 3697.943228] __kvmalloc_node_noprof+0x3e9/0x6a0
[ 3697.944948] handle_generic_event+0x59b/0x750
[ 3697.946592] genl_family_rcv_msg_doit+0x3d6/0x560
[ 3697.946977] genl_rcv_msg+0x67c/0x900
[ 3697.947224] netlink_rcv_skb+0x286/0x580
[ 3697.947488] genl_rcv+0x2d/0x80
[ 3
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: release pending child sockets outside the handler lock
smbdirect_socket_destroy() releases the listener's pending/ready child
sockets while still holding the listener's handler lock, the
&id_priv->handler_mutex taken via rdma_lock_handler(), not
sc->listen.lock, and before the listener's own rdma_destroy_id().
That ordering has one real consequence and one cosmetic one.
The real one: smbdirect_socket_release() drops the child's last
reference, which destroys the child's cm_id. Doing that before the
listener's rdma_destroy_id() lets _cma_cancel_listens(), running from
the listener's _destroy_id(), walk an already freed child id_priv,
which KASAN catches as a slab-use-after-free during listener shutdown:
[ 4758.909130] BUG: KASAN: slab-use-after-free in __mutex_lock+0x1469/0x1560
[ 4758.911450] Read of size 1 at addr ffff88821c381db4 by task ksmbd.control/1652
[ 4758.913262] Call Trace:
[ 4758.913267] <TASK>
[ 4758.913299] __mutex_lock+0x1469/0x1560
[ 4758.913408] _cma_cancel_listens+0x312/0x3b0
[ 4758.913413] _destroy_id+0x363/0xee0
[ 4758.913417] smbdirect_socket_destroy_sync+0x17d5/0x2440
[ 4758.913443] smbdirect_socket_release+0x124/0x230
[ 4758.913451] ksmbd_rdma_stop_listening+0x9f/0x190
[ 4758.913457] ksmbd_conn_transport_destroy+0x65/0x3c0
[ 4758.913463] kill_server_store+0x1fb/0x2b0
[ 4758.913501] kernfs_fop_write_iter+0x349/0x4d0
[ 4758.913507] vfs_write+0x5e7/0xc70
[ 4758.913528] ksys_write+0x12a/0x210
[ 4758.913541] do_syscall_64+0x135/0x460
[ 4758.913555] entry_SYSCALL_64_after_hwframe+0x77/0x7f
The cosmetic one: releasing a child recurses into
smbdirect_socket_destroy(), which takes the child's own
rdma_lock_handler() lock nested under the listener's. The listener's
and the child's cm_id are always different instances, so this cannot
deadlock for real; the CM core itself nests a new connection id's
handler_mutex under the listening id's in cma_ib_req_handler(). But
lockdep only sees one lock class, reports possible recursive locking,
and then disables itself, hiding real locking bugs for the rest of the
run:
[ 2424.579653] WARNING: possible recursive locking detected
[ 2424.581180] 7.1.0-next-20260623+ #89 Not tainted
[ 2424.582548] --------------------------------------------
[ 2424.584500] ksmbd.control/8854 is trying to acquire lock:
[ 2424.586817] ffff888102303c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440
[ 2424.590590]
[ 2424.590590] but task is already holding lock:
[ 2424.591601] ffff888102046c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440
[ 2424.594178]
[ 2424.594178] other info that might help us debug this:
[ 2424.596634] Possible unsafe locking scenario:
[ 2424.596634]
[ 2424.598841] CPU0
[ 2424.599765] ----
[ 2424.600695] lock(&id_priv->handler_mutex);
[ 2424.601836] lock(&id_priv->handler_mutex);
[ 2424.602590]
[ 2424.602590] *** DEADLOCK ***
[ 2424.602590]
[ 2424.604512] May be due to missing lock nesting notation
Splice the pending/ready children onto a local list under the
listener's listen.lock, while the handler lock is held so a concurrent
CM CONNECT_REQUEST cannot add more, but defer the actual
smbdirect_socket_release() calls until after the listener's cm_id has
been destroyed and its handler lock dropped. The children are
independent sockets whose teardown needs neither the listener's
handler lock nor its cm_id.
Found with ksmbdzzer [2], a KSMBD fuzzer that drives libFuzzer with a
kcov-dataflow [1] coverage vector: it folds each instrumented
comparison/argument's runtime operand value together with its PC (the
default arm mixes them as pc⊕val) so that a new operand value at a known
site counts as new coverage.
[1] https://lwn.net/Articles/1077606/
[2] https://github.com/yskzalloc/kcov-dataflow |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Fix core_data leak on CPUs without PTS
pdata->core_data is allocated in init_temp_data() when the first core
temp_data of a package is created, but it is only released from
destroy_temp_data(), and only in the branch that handles the package
temp_data.
Package temp_data is created solely when the CPU supports
X86_FEATURE_PTS. On a CPU without it, coretemp_cpu_online() never calls
coretemp_add_core() with pkg_flag set, so pdata->pkg_data stays NULL.
coretemp_cpu_offline() then skips the removal of the package interface,
destroy_temp_data() is never called for package data, and the array is
still allocated when coretemp_device_remove() frees the platform data
that pointed at it.
Release the array in coretemp_device_remove(). destroy_temp_data() sets
pdata->core_data to NULL when it frees it, so the added kfree() is a
no-op on CPUs that do have PTS.
Tested on an Intel Core i5-1135G7. The driver was instrumented to log
every allocation and release of pdata->core_data, and the PTS check in
coretemp_cpu_online() was patched out to emulate a CPU without package
thermal support. Without this change the array was allocated and never
released, and coretemp_device_remove() still saw a non-NULL pointer.
With it the array is released and the pointer accounting balances. On an
unmodified build the release still happens via the package temp_data and
the added kfree() sees NULL, with no slab warnings over repeated module
load and unload cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: invalidate the correct range after O_APPEND direct write
fuse_direct_write_iter() captures pos before generic_write_checks(),
which moves ki_pos to EOF for O_APPEND writes:
fuse_direct_write_iter()
{
pos = iocb->ki_pos; /* 0 (user-supplied) */
generic_write_checks(); /* ki_pos -> EOF */
fuse_direct_io(); /* writes at EOF, correct */
invalidate(pos, pos + res); /* [0, res) -- wrong */
}
The post-write invalidation targets a stale range instead of the
actual written range at EOF.
This can cause data inconsistency when the file size is not
page-aligned. The tail page straddling EOF has a valid portion
before EOF that concurrent readers can fault back in during the
DIO write window:
Tail page (file size X not page-aligned):
page_start X (EOF) page_end
|--- valid data ----|-- stale --|
CPU0 (O_APPEND DIO writer) CPU1 (buffered reader)
-------------------------- ----------------------
invalidate [X, X+len)
tail page evicted
FUSE_WRITE in flight ...
read [page_start, X)
tail page re-faulted
[X, page_end) = stale
FUSE_WRITE completes
i_size = X + len
invalidate [0, len) <- WRONG
tail page still cached
read [X, X+len)
hits stale tail page
returns old data
Fix by reading pos back from iocb->ki_pos after generic_write_checks(),
as generic_file_direct_write() does.
Also fix a typo in the comment ("may have" -> "may have competed"). |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: update queue NAPI association on queue reset
In netdevsim, receive queues (struct nsim_rq) embed their own struct
napi_struct. When queue reset is performed (e.g. via queue_reset
debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq,
and nsim_queue_mem_free() later deletes and frees the old one.
However, nsim_queue_start() failed to update the queue-to-NAPI mapping
via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to
point to the old NAPI struct. After the old queue was freed, a subsequent
queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN
slab-use-after-free read in nla_put_napi_id() when accessing
rxq->napi->napi_id.
Fix this by calling netif_queue_set_napi() in nsim_queue_start() to
associate the new NAPI with the RX queue, and clear the association
with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback
The interrupt core calls the irq_domain_activate() callback from
__setup_irq() with desc->lock held and interrupts disabled. Both
aspeed_intc1_irq_domain_activate() and aspeed_intc0_resolve_route() test a
compatible string with fwnode_device_is_compatible().
fwnode_device_is_compatible() invokes fwnode_property_match_string(), which
allocates with GFP_KERNEL. That's obviously not possible with interrupts
disabled and a raw spinlock held.
Both call sites are only ever handed OF nodes, so use
of_device_is_compatible() instead: it walks the property in place and does
not allocate. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local_page() usage in compress
Several compressed I/O paths discard the address returned by
kmap_local_page() and later access or unmap the page using page_address().
This is invalid for highmem pages, and local mappings must also be unmapped
using the address returned by kmap_local_page().
Map each destination page in ntfs_decompress() only while producing the
current sub-block. Use memcpy_from_page(), memcpy_to_page(), and
memzero_page() for the other page accesses. Remove unnecessary local
mappings from ntfs_write_cb(), where pages are accessed through the vmap()
mapping. |
| Local privilege escalation due to insecure file permissions. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 1.9.3.1021, Acronis Backup extension for Plesk (Linux) before build 1.8.11.638, Acronis Backup plugin for DirectAdmin (Linux) before build 1.2.3.238. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: free pending qentry in smc_llc_flow_stop() before memset
smc_llc_flow_stop() resets a flow struct with a blind memset:
spin_lock_bh(&lgr->llc_flow_lock);
memset(flow, 0, sizeof(*flow));
flow->type = SMC_LLC_FLOW_NONE;
spin_unlock_bh(&lgr->llc_flow_lock);
If flow->qentry is non-NULL at this point the pointer is overwritten without the
allocation being freed, leaking one kmalloc object.
A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set
flow->qentry after the legitimate message has been consumed by the waiter via
smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type
non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that
window the duplicate is stashed into flow->qentry, and then lost when
smc_llc_flow_stop() zeros the struct.
Call smc_llc_flow_qentry_del() inside the lock before the memset.
smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the
normal case where no entry is pending is a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix NULL pointer dereference in __xsk_rcv()
In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a
loop without checking its return value. xsk_buff_can_alloc() only
counts fill queue entries without validating their addresses, so it
can succeed while xsk_buff_alloc() rejects all remaining entries and
returns NULL.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000
KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350)
Call Trace:
xsk_generic_rcv+0x26d/0x5f0
xdp_do_generic_redirect+0x3c5/0xcf0
do_xdp_generic+0x92f/0xe70
__netif_receive_skb_core.constprop.0+0xf7e/0x2b30
Fix this with a two-stage transaction. First allocate and stage all
buffers required for the packet, recycling all staged buffers with
xsk_buff_free() if any allocation fails. Only after this stage
succeeds, copy the data, reserve the RX descriptors, and release the
buffers in an error-free loop. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_balloon: quiesce balloon work before device shutdown
Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on
device_shutdown()") added a generic virtio bus .shutdown handler that
breaks and resets every virtio device during device_shutdown(), i.e. on
reboot and kexec.
virtio_balloon provides no .shutdown of its own, so that generic path
runs while the balloon's asynchronous work is still armed. Once the
device has been broken, virtqueue_add_inbuf() in
virtballoon_free_page_report() returns -EIO and trips its
WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an
ordinary reboot, for example a kexec based upgrade, into a fatal panic
in the middle of device_shutdown(), so the machine never reaches the
new kernel.
Relaxing that single WARN_ON_ONCE() would only hide the symptom: the
inflate/deflate and OOM paths do not warn, they call
wait_event(vb->acked, ...) and would instead block forever on a broken
queue that can no longer complete. The device has to be quiesced, not
just kept quiet.
Add a .shutdown handler that quiesces the balloon via the shared
virtballoon_quiesce() helper while the device is still alive, and only
then breaks and resets it via virtio_device_shutdown(). Unlike
virtballoon_remove() the balloon workqueue is not destroyed, as shutdown
does not free the device and cancel_work_sync() together with stop_update
already prevent any further work from being queued. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim: fix cleanup after worker creation failure
vdpasim_create() leaves vdpasim->worker as an ERR_PTR when
kthread_run_worker() fails. The error path then drops the device
reference, which releases the partially initialized simulator.
vdpasim_free() unconditionally passes the worker pointer to
kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger
a general protection fault.
Store the worker error, clear the pointer, and only clean up the worker
when it was successfully initialized. Also make the release path tolerate
partially initialized objects by guarding virtqueue and IOTLB cleanup,
since the same release path can be reached from other initialization
failures.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/hsmp: Reject negative power cap writes in hwmon
hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long
and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a
__u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write
to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge
unsigned value by the division and then stored into the u32 argument.
As a result a nonsensical, multi-gigawatt socket power limit is sent to
the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being
rejected.
Reject negative values with -EINVAL before the conversion.
Tested with HSMP enabled:
CAP=$(dirname $(grep -l amd_hsmp_hwmon \
/sys/class/hwmon/hwmon*/name | head -1))/power1_cap
# negative write
echo -1000000 > $CAP ; echo "ret=$?"
# valid positive write must still work
echo 400000000 > $CAP ; echo "ret=$?"
Before:
# echo -1000000 > $CAP ; echo "ret=$?"
ret=0 <- accepted; bogus limit sent to SMU
# echo 400000000 > $CAP ; echo "ret=$?"
ret=0
After:
# echo -1000000 > $CAP ; echo "ret=$?"
bash: echo: write error: Invalid argument
ret=1 <- rejected with -EINVAL
# echo 400000000 > $CAP ; echo "ret=$?"
ret=0 <- valid write still works |
| In the Linux kernel, the following vulnerability has been resolved:
software node: Fix software_node_get_reference_args() with index -1
The bounds check for the index passed to
software_node_get_reference_args() was failing when passed UINT_MAX,
this in turn would lead to an out of bound access in the property
array. Fix the bound check to also cover the UINT_MAX case. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A remote denial of service vulnerability was found in the Linux kernel’s TIPC kernel module. The while loop in tipc_link_xmit() hits an unknown state while attempting to parse SKBs, which are not in the queue. Sending two small UDP packets to a system with a UDP bearer results in the CPU utilization for the system to instantly spike to 100%, causing a denial of service condition. |
| A slab-out-of-bound read problem was found in brcmf_get_assoc_ies in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c in the Linux Kernel. This issue could occur when assoc_info->req_len data is bigger than the size of the buffer, defined as WL_EXTRA_BUF_MAX, leading to a denial of service. |
| A flaw use after free in the Linux kernel integrated infrared receiver/transceiver driver was found in the way user detaching rc device. A local user could use this flaw to crash the system or potentially escalate their privileges on the system. |
| An issue was discovered in fl_set_geneve_opt in net/sched/cls_flower.c in the Linux kernel before 6.3.7. It allows an out-of-bounds write in the flower classifier code via TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets. This may result in denial of service or privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in get_manuf_info()
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
[ johan: amend commit message; also check for short descriptors ] |
