| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: avoid teardown retry loop on xarray allocation failure
__ublk_shmem_remove_ranges() removes matching maple tree ranges in
batches, but first stores each range into a temporary xarray so that the
pages can be unpinned after dropping the maple tree lock.
That temporary xarray is filled under the maple tree lock with
xa_store(..., GFP_ATOMIC). If the store fails before mas_erase(), the
current range is left in the tree and the helper returns false. The
outer ublk_shmem_remove_ranges() loop then immediately retries the same
range. While the atomic allocation keeps failing, the teardown path has
no forward progress.
The issue can be reproduced with radix_tree_node failslab injection after
a SHMEM_ZC buffer has already been registered:
# Kernel config:
# CONFIG_BLK_DEV_UBLK=y
# CONFIG_DEBUG_FS=y
# CONFIG_FAULT_INJECTION=y
# CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAILSLAB=y
echo 10 > /proc/sys/vm/nr_hugepages
mkdir -p /tmp/htlb
mount -t hugetlbfs none /tmp/htlb
fallocate -l 4M /tmp/htlb/ublk_buf
dev_id=$(kublk add -t null --shmem_zc \
--htlb /tmp/htlb/ublk_buf |
awk -F '[ :]' '/dev id/ {print $3}')
echo 1 > /sys/kernel/slab/radix_tree_node/failslab
echo Y > /sys/kernel/debug/failslab/cache-filter
echo Y > /sys/kernel/debug/failslab/ignore-gfp-wait
echo 1 > /sys/kernel/debug/failslab/interval
echo -1 > /sys/kernel/debug/failslab/times
echo 100 > /sys/kernel/debug/failslab/probability
kublk del -n "$dev_id"
On the unfixed kernel the delete command was still running after 3
seconds. Disabling failslab made it return. The fault-injection stack
showed:
should_failslab
kmem_cache_alloc_lru_noprof
__xas_nomem
__xa_store
xa_store
__ublk_shmem_remove_ranges
ublk_cdev_rel
ublk_ctrl_del_dev
Remove the allocation from the teardown loop. Keep the existing batch
limit, but collect {base_pfn, nr_pages} pairs in a fixed-size stack array.
Once a matching range is found, the range is erased from the maple tree
before dropping the lock, so each successful scan makes progress without
depending on any GFP_ATOMIC allocation.
With the same failslab settings, the fixed kernel completed
"kublk del -n $dev_id" successfully in about 45 ms. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: ubi: Release device reference on busy detach
ubi_detach_mtd_dev() obtains a device reference through ubi_get_device()
before checking whether the UBI device is busy. The busy return path drops
ubi->ref_count but leaves the device reference held, so the device object
cannot be released after a later detach.
Drop the device reference before returning -EBUSY. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: bound SNL TLV parsing to the skb and add length checks
nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length
pair derived from skb->len, without bounding reads to the actual skb
data. Three problems followed:
- For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed.
- The per-TLV header (type, length) was read without checking that two
bytes remained.
- A declared TLV length could run past the end of the buffer, and an
SDREQ with length == 0 made "service_name_len = length - 1" underflow
(size_t), driving an out-of-bounds read in the following strncmp() /
nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3]
without a length check.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Walk the TLV list by pointer, bounded by skb_tail_pointer() over the
linear skb data, and validate each TLV declared length before use. Add
explicit length checks for SDREQ (>= 1) and SDRES (exactly 2).
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed()
Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls
nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a
partition device or write through a read-only file descriptor.
Pass flags and open_for_write through and reject disallowed commands
with -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix the SCO setup context lifetime
hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so
the context is only freed if hci_enhanced_setup_sync() actually runs. An
entry that is cancelled instead is leaked, as
_hci_cmd_sync_cancel_entry() does not release entry->data when there is
no destroy callback, and hci_cmd_sync_clear() cancels every pending entry
when the controller is unregistered.
The context also stores a bare hci_conn pointer, so the connection can be
freed while the work is queued. The dequeue in hci_conn_del() does not
cover it either, as it matches on entry->data == conn and entry->data is
the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth:
hci_sync: hold conn in hci_connect_acl/le_sync() callbacks").
Hold the connection and release both from a destroy callback. The
submission failure path drops both, since hci_cmd_sync_submit() does not
call the destroy callback when it fails to queue. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: serialize resident iomap reads with mrec_lock
ntfs_read_iomap_begin_resident() walks the MFT record through
ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock,
while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and
ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer
under that lock. map_mft_record() only takes a reference and does not
serialize, so the reader can observe torn attribute length and offset
fields while a writer is relocating the records.
KCSAN reports the race between the mmap read fault path and both link()
and unlink():
BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize
write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1:
ntfs_attr_record_resize+0xd2/0x130
ntfs_attr_record_rm+0xad/0x530
ntfs_delete+0x224/0x640
ntfs_unlink+0x14d/0x280
vfs_unlink+0x157/0x520
read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0:
ntfs_attr_find+0x104/0x5b0
ntfs_attr_lookup+0x39c/0x10c0
ntfs_read_iomap_begin_resident+0xc6/0x230
ntfs_read_iomap_begin+0x5d/0xa0
iomap_iter+0x2e2/0x6e0
iomap_read_folio+0x147/0x2a0
ntfs_read_folio+0x108/0x170
filemap_read_folio+0x35/0x100
filemap_fault+0x993/0x1000
value changed: 0x00000250 -> 0x000001f0
The address is mrec + 0x18, i.e. mft_record.bytes_in_use, and the change
is the 96 bytes of one $FILE_NAME attribute being removed.
Keep base_ni->mrec_lock from the resident read iomap lookup through
iomap_end(). This protects both the attribute walk and the subsequent copy
from iomap->inline_data, which points into the MFT record. The non-resident
path is left alone: ntfs_lookup() already holds the directory inode's
mrec_lock when it reads an index folio through read_mapping_folio(), and
taking the lock in the shared wrapper deadlocks there with recursive locking
on mrec_lock. The comment above the read_mapping_folio() call in
fs/ntfs/dir.c notes the same hazard.
The seek path uses the same lookup helper but does not dereference
iomap->inline_data. Release the lock before returning from that path,
whereas the regular read path records base_ni in iomap->private and releases
the lock from its iomap_end() callback.
Tested with a reproducer that faults in a 16-byte resident file while
another thread runs link()/unlink() on it. Before: 40 KCSAN reports in
about one second. After: no reports in 180 seconds over 206,090 read
iterations and 423,540 link/unlink cycles. A PROVE_LOCKING build shows no
lockdep splat with the same reproducer running for 60 seconds. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject unprivileged writes to reserved $LX* xattrs
Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names
from userspace unless the caller has CAP_SYS_ADMIN. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib()
ntfs_ir_to_ib copies all entries from index_root into a freshly allocated
index_block_size-byte buffer without verifying that the entries fit in the
available space. The entries in index_root may be larger than the usable
entry space in the index block.
This can cause OOB writes past the end of the allocation.
The validator ntfs_index_root_inconsistent() checks that entries are
self-consistent within the IR value, but never cross-checks them against
index_block_size. There is no bounds check in ntfs_ir_to_ib() before the
memcpy.
Fixing this at the sink in ntfs_ir_to_ib() since
ntfs_index_root_inconsistent() validates the logical consistency of
index_root as a structure and a root with large entries is a structurally
valid root. The bug is a size conflict of ntfs_ir_to_ib().
Also, the validator is called once per inode load in
ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a
reparent, a check there adds no overhead to the common path.
Moreover, even a future call path that bypasses the validator would still
be protected.
With NULL as first parameter of ntfs_error(), the volume error flag is
never set by this call, so the device name will be absent from the error
message. In any case, that the caller, ntfs_ir_reparent(), prints an error
message that includes the device name on NULL returns.
I think this is the best solution available without adding
'struct super_block *sb' as a parameter to ntfs_ir_to_ib().
This heap out-of-bounds write is triggered by a crafted filesystem image,
which is not in the kernel threat model, anyway, fixing memory errors would
be nice to keep things secure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix integer overflow in ftp helper port/address parsing
ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16
(hport) and into unsigned char (p[]) without checking for overflow.
A crafted FTP PASV/EPSV response with an over-long port or address
octet wraps the value, so the helper configures the data connection
with a truncated port/address.
The netfilter conntrack FTP helper had the same defect, fixed in
commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16
overflows"). Apply the equivalent fix here: widen the port accumulator
to u32 and reject values above 65535, and reject address octets above
255. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: remove callback IDR entry on client allocation failure
nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it
finishes setting up the client. If any later initialization step fails,
the error path frees the nfs_client directly with nfs_free_client(). That
bypasses nfs_put_client(), which is where the callback IDR entry is
removed during normal teardown.
A failed allocation can therefore leave cb_ident_idr pointing at a freed
nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the
stale pointer and take a reference to it.
Make the callback IDR removal helper callable by the allocation failure
path, and remove the callback identifier before freeing the client.
This was found by a local static-analysis checker for publish-before-free
lifetime bugs and confirmed by manual inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RXDMAD_C buffer recycling race
The RXDMAD_C buffers come from the RRO data queues' page pools, which are
bound to a different NAPI, so the direct page-pool recycle used here could
race the owning NAPI; take the non-direct path as is already done for WED
RX queues. |
| In the Linux kernel, the following vulnerability has been resolved:
block: mtip32xx: synchronize ioctls with device removal
The ioctl handlers only test REMOVE_PENDING before entering
mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free
dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already
open block device can reach the handlers while del_gendisk() is in
progress.
Serialize both native and compat ioctls with removal. Set REMOVE_PENDING
before taking the mutex so new callers fail after an in-flight ioctl has
drained, and hold the mutex until the port has been torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: reject per-device queue resize for shared tag set
When shared_tags is enabled, null_setup_tagset() makes the device use the
global tag_set, whose driver_data stays NULL. null_map_queues() therefore
falls back to the module-wide g_submit_queues/g_poll_queues instead of any
per-device value.
Resizing submit_queues or poll_queues via configfs on such a device calls
blk_mq_update_nr_hw_queues() on the shared set, shrinking
set->nr_hw_queues. __blk_mq_realloc_hw_ctxs() only grows the
q->queue_hw_ctx[] allocation, so on shrink it merely exits and NULLs the
now-excess hctx slots. null_map_queues(), however, keeps mapping CPUs with
the unchanged g_submit_queues/g_poll_queues, so mq_map[] ends up pointing
at those NULLed hctx slots. blk_mq_map_swqueue() then dereferences the NULL
hctx (hctx->cpumask), crashing the kernel:
[ 460.218374] KASAN: null-ptr-deref in range [0x0000000000000098-0x000000000000009f]
[ 460.219003] CPU: 24 UID: 0 PID: 1492 Comm: sh Not tainted 7.2.0-rc2+ #67 PREEMPT(full)
[ 460.219792] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
[ 460.220452] RIP: 0010:blk_mq_map_swqueue+0x4db/0x1430
......
[ 460.228977] Call Trace:
[ 460.229175] <TASK>
[ 460.229354] blk_mq_update_nr_hw_queues+0xd49/0x11c0
[ 460.229779] ? __pfx_blk_mq_update_nr_hw_queues+0x10/0x10
[ 460.230200] nullb_update_nr_hw_queues+0x1a9/0x370 [null_blk]
[ 460.230694] nullb_device_submit_queues_store+0xd9/0x170 [null_blk]
[ 460.231190] ? __pfx_nullb_device_submit_queues_store+0x10/0x10 [null_blk]
[ 460.231776] ? configfs_write_iter+0x35c/0x4e0
[ 460.232122] configfs_write_iter+0x286/0x4e0
[ 460.232460] vfs_write+0x52d/0xd00
[ 460.232779] ? __x64_sys_openat+0x108/0x1d0
[ 460.233106] ? __pfx_vfs_write+0x10/0x10
[ 460.233413] ? fdget_pos+0x1cf/0x4c0
[ 460.233745] ? fput_close+0x133/0x190
[ 460.234038] ? __pfx_expand_files+0x10/0x10
[ 460.234368] ksys_write+0xfc/0x1d0
Reproducer:
modprobe null_blk shared_tags=1 submit_queues=64 poll_queues=1
mkdir /sys/kernel/config/nullb/dev
echo 1 > /sys/kernel/config/nullb/dev/power
echo 1 > /sys/kernel/config/nullb/dev/submit_queues
A per-device resize of a shared tag set is meaningless anyway, so reject it
with -EINVAL in nullb_update_nr_hw_queues() when the device is bound to the
global tag_set. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free global tag_set on init error path
If shared_tags is enabled, null_setup_tagset() allocates the global tag_set
via null_init_global_tag_set(). If device creation later fails, err_dev
destroys the default devices and calls unregister_blkdev(), but never frees
the global tag_set. Since module init failed, null_exit() is never invoked,
so the global tag_set's tags and maps are permanently leaked.
Free the global tag_set in err_dev, matching null_exit() which does
if (tag_set.ops) blk_mq_free_tag_set(&tag_set). |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: register configfs subsystem after creating default devices
In null_init(), configfs_register_subsystem() currently runs before
register_blkdev(), so when null_blk is built as a module, a racing mkdir()
+ poweron from userspace can reach null_add_dev() while null_major is still
0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0)
and fails:
[root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0,
[ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
[ 2366.529081] CPU: 26 UID: 0 PID: 1600 Comm: sh Not tainted 7.2.0-rc1+ #66 PREEMPT(full)
......
[ 2366.547251] Call Trace:
[ 2366.547575] <TASK>
[ 2366.547831] ? _raw_spin_lock+0x84/0xe0
[ 2366.548260] add_disk_fwnode+0x114/0x560
[ 2366.548739] null_add_dev+0x102d/0x1b80 [null_blk]
[ 2366.549310] ? __pfx_null_add_dev+0x10/0x10 [null_blk]
[ 2366.549906] ? mutex_lock+0xde/0x1c0
[ 2366.550361] ? __pfx_mutex_lock+0x10/0x10
[ 2366.550827] nullb_device_power_store+0x1e7/0x280 [null_blk]
[ 2366.551499] ? __pfx_nullb_device_power_store+0x10/0x10 [null_blk]
[ 2366.552177] ? __kmalloc_cache_noprof+0x1f5/0x470
[ 2366.552748] ? configfs_write_iter+0x35c/0x4e0
[ 2366.553242] configfs_write_iter+0x286/0x4e0
[ 2366.553787] vfs_write+0x52d/0xd00
[ 2366.554169] ? __pfx_vfs_write+0x10/0x10
[ 2366.554679] ? __pfx___css_rstat_updated+0x10/0x10
[ 2366.555196] ? fdget_pos+0x1cf/0x4c0
[ 2366.555649] ksys_write+0xfc/0x1d0
......
Additionally, the err_dev path destroys all devices on nullb_list while
configfs is still registered. If a racing mkdir() + poweron puts a user
device on the list, null_destroy_dev()->null_free_dev() kfrees the user
device's nullb_device but /sys/kernel/config/nullb/<name> is still
reachable. Any userspace access to the item will trigger a UAF.
For simplicity, move configfs_register_subsystem() to the end to solve
the problems above. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: use DEFINE_MUTEX for the file-scope mutex
In null_init(), mutex_init(&lock) currently happens after
configfs_register_subsystem(), which exposes the nullb subsystem to
userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach
null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is
initialized, trigger warning:
[ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301
[ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4
......
[ 123.154926] Call Trace:
[ 123.155172] <TASK>
[ 123.155419] ? __pfx_mutex_lock+0x10/0x10
[ 123.156181] ? __pfx__raw_spin_lock+0x10/0x10
[ 123.156571] nullb_group_make_group+0x20/0x100 [null_blk]
[ 123.157011] configfs_mkdir+0x47b/0xc70
[ 123.157337] ? __pfx_configfs_mkdir+0x10/0x10
[ 123.157719] ? may_create_dentry+0x242/0x2e0
[ 123.158061] vfs_mkdir+0x2a9/0x6c0
[ 123.158352] filename_mkdirat+0x3dc/0x500
[ 123.158710] ? __pfx_filename_mkdirat+0x10/0x10
[ 123.159070] ? strncpy_from_user+0x3a/0x1d0
[ 123.159413] __x64_sys_mkdir+0x6b/0x90
[ 123.159760] do_syscall_64+0xea/0x600
Replace the runtime mutex_init(&lock) with a static DEFINE_MUTEX(lock)
declaration to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: riscv-sbi-mpxy: validate RPMI notification lengths
The SBI return value controls how many bytes are copied from shared
memory into the RPMI notification buffer. It is not validated against
the negotiated shared-memory size before that copy. The event walker
also uses a reversed loop condition and can inspect a short event record.
Validate the complete notification length before copying it, iterate only
while a full event header remains, and stop when a declared event payload
extends beyond the copied notification data. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: etm4x: fix underflow for usage of (nrseqstate - 1)
According to IHI006H Embedded Trace Macrocell Architecture
Specification[0], TRCSEQEVR<n> is implemented only when
TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2;
otherwise, TRCIDR5.NUMSEQSTATE is 0b000.
IOW, the number of usage in the initialisation or setting
TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make
underflow issue when TRCIDR5.NUMSEQSTATE is 0b000.
Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate.
As part of this introduce ETM_MAX_SEQ_TRANSITIONS macro and
apply nr_seq_ctrls and above macro to TRCSEQEVR<n> relevant fields setup. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative optlen in cgroup getsockopt hook
A cgroup getsockopt BPF program can shrink ctx->optlen after the
kernel getsockopt handler has run. The kernel-buffer variant, used by
TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original
length.
If BPF writes a negative optlen, that value is accepted and propagated
back to the TCP getsockopt code. It can then be passed to
copy_to_sockptr() as a size_t and trigger the hardened usercopy
bytes > INT_MAX warning.
Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(),
matching the lower-bound validation already present in the sockptr-based
getsockopt hook. |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: nfcon: Do not call console_is_registered() in nfcon_device()
Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list
synchronization") show_cons_active() calls the .device() method under
the console_list_lock, but console_is_registered() tries to acquire
console_list_lock as well, causing a deadlock. It should not be
necessary to check console_is_registered() here since the function
should not be called in the fist place when the console is not
registered. |
