| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| UAF vulnerability in the screen recording framework module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix use-after-free in do_zone_finish()
Shinichiro reported the following use-after-free triggered by the device
replace operation in fstests btrfs/070.
BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0
==================================================================
BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs]
Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007
CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0x200/0x3e0
kasan_report+0xd8/0x110
? do_zone_finish+0x91a/0xb90 [btrfs]
? do_zone_finish+0x91a/0xb90 [btrfs]
do_zone_finish+0x91a/0xb90 [btrfs]
btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs]
? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs]
? btrfs_put_root+0x2d/0x220 [btrfs]
? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs]
cleaner_kthread+0x21e/0x380 [btrfs]
? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
kthread+0x2e3/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 3493983:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_alloc_device+0xb3/0x4e0 [btrfs]
device_list_add.constprop.0+0x993/0x1630 [btrfs]
btrfs_scan_one_device+0x219/0x3d0 [btrfs]
btrfs_control_ioctl+0x26e/0x310 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 3494056:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3f/0x60
poison_slab_object+0x102/0x170
__kasan_slab_free+0x32/0x70
kfree+0x11b/0x320
btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs]
btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs]
btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs]
btrfs_ioctl+0xb27/0x57d0 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
The buggy address belongs to the object at ffff8881543c8000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 96 bytes inside of
freed 1024-byte region [ffff8881543c8000, ffff8881543c8400)
The buggy address belongs to the physical page:
page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8
head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
This UAF happens because we're accessing stale zone information of a
already removed btrfs_device in do_zone_finish().
The sequence of events is as follows:
btrfs_dev_replace_start
btrfs_scrub_dev
btrfs_dev_replace_finishing
btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced
btrfs_rm_dev_replace_free_srcdev
btrfs_free_device <-- device freed
cleaner_kthread
btrfs_delete_unused_bgs
btrfs_zone_finish
do_zone_finish <-- refers the freed device
The reason for this is that we're using a
---truncated--- |
| Memory corruption while processing IOCTL command to handle buffers associated with a session. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: unlink NAPIs from queues on error to open
CI hit a UaF in fbnic in the AF_XDP portion of the queues.py test.
The UaF is in the __sk_mark_napi_id_once() call in xsk_bind(),
NAPI has been freed. Looks like the device failed to open earlier,
and we lack clearing the NAPI pointer from the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix inode use after free in ext4_end_io_rsv_work()
In ext4_io_end_defer_completion(), check if io_end->list_vec is empty to
avoid adding an io_end that requires no conversion to the
i_rsv_conversion_list, which in turn prevents starting an unnecessary
worker. An ext4_emergency_state() check is also added to avoid attempting
to abort the journal in an emergency state.
Additionally, ext4_put_io_end_defer() is refactored to call
ext4_io_end_defer_completion() directly instead of being open-coded.
This also prevents starting an unnecessary worker when EXT4_IO_END_FAILED
is set but data_err=abort is not enabled.
This ensures that the check in ext4_put_io_end_defer() is consistent with
the check in ext4_end_bio(). Otherwise, we might add an io_end to the
i_rsv_conversion_list and then call ext4_finish_bio(), after which the
inode could be freed before ext4_end_io_rsv_work() is called, triggering
a use-after-free issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ivsc: Fix crash at shutdown due to missing mei_cldev_disable() calls
Both the ACE and CSI driver are missing a mei_cldev_disable() call in
their remove() function.
This causes the mei_cl client to stay part of the mei_device->file_list
list even though its memory is freed by mei_cl_bus_dev_release() calling
kfree(cldev->cl).
This leads to a use-after-free when mei_vsc_remove() runs mei_stop()
which first removes all mei bus devices calling mei_ace_remove() and
mei_csi_remove() followed by mei_cl_bus_dev_release() and then calls
mei_cl_all_disconnect() which walks over mei_device->file_list dereferecing
the just freed cldev->cl.
And mei_vsc_remove() it self is run at shutdown because of the
platform_device_unregister(tp->pdev) in vsc_tp_shutdown()
When building a kernel with KASAN this leads to the following KASAN report:
[ 106.634504] ==================================================================
[ 106.634623] BUG: KASAN: slab-use-after-free in mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei
[ 106.634683] Read of size 4 at addr ffff88819cb62018 by task systemd-shutdow/1
[ 106.634729]
[ 106.634767] Tainted: [E]=UNSIGNED_MODULE
[ 106.634770] Hardware name: Dell Inc. XPS 16 9640/09CK4V, BIOS 1.12.0 02/10/2025
[ 106.634773] Call Trace:
[ 106.634777] <TASK>
...
[ 106.634871] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636)
[ 106.634901] mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei
[ 106.634921] mei_cl_all_disconnect (drivers/misc/mei/client.c:2165 (discriminator 4)) mei
[ 106.634941] mei_reset (drivers/misc/mei/init.c:163) mei
...
[ 106.635042] mei_stop (drivers/misc/mei/init.c:348) mei
[ 106.635062] mei_vsc_remove (drivers/misc/mei/mei_dev.h:784 drivers/misc/mei/platform-vsc.c:393) mei_vsc
[ 106.635066] platform_remove (drivers/base/platform.c:1424)
Add the missing mei_cldev_disable() calls so that the mei_cl gets removed
from mei_device->file_list before it is freed to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/migrate: prevent potential UAF
If we hit the error path, the previous fence (if there is one) has
already been put() prior to this, so doing a fence_wait could lead to
UAF. Tweak the flow to do to the put() until after we do the wait.
(cherry picked from commit 9b7ca35ed28fe5fad86e9d9c24ebd1271e4c9c3e) |
| Use-after-free vulnerability in the nsIOService::NewChannelFromURIWithProxyFlags function in Mozilla Firefox before 25.0, Firefox ESR 17.x before 17.0.10 and 24.x before 24.1, Thunderbird before 24.1, Thunderbird ESR 17.x before 17.0.10, and SeaMonkey before 2.22 allows remote attackers to execute arbitrary code via vectors involving a blob: URL. |
| Use-after-free vulnerability in the nsDocLoader::doStopDocumentLoad function in Mozilla Firefox before 25.0, Firefox ESR 17.x before 17.0.10 and 24.x before 24.1, Thunderbird before 24.1, Thunderbird ESR 17.x before 17.0.10, and SeaMonkey before 2.22 allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via vectors involving a state-change event during an update of the offline cache. |
| A use-after-free vulnerability can occur when the SMIL animation controller incorrectly registers with the refresh driver twice when only a single registration is expected. When a registration is later freed with the removal of the animation controller element, the refresh driver incorrectly leaves a dangling pointer to the driver's observer array. This vulnerability affects Thunderbird < 60.6, Firefox ESR < 60.6, and Firefox < 66. |
| A use-after-free vulnerability can occur when a raw pointer to a DOM element on a page is obtained using JavaScript and the element is then removed while still in use. This results in a potentially exploitable crash. This vulnerability affects Thunderbird < 60.6, Firefox ESR < 60.6, and Firefox < 66. |
| A use-after-free vulnerability can occur during font face manipulation when a font face is freed while still in use, resulting in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.6, Firefox ESR < 52.6, and Firefox < 58. |
| A use-after-free vulnerability can occur during mouse event handling due to issues with multiprocess support. This results in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.6, Firefox ESR < 52.6, and Firefox < 58. |
| A use-after-free vulnerability can occur when manipulating HTML media elements with media streams, resulting in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.6, Firefox ESR < 52.6, and Firefox < 58. |
| A use-after-free vulnerability can occur when the widget listener is holding strong references to browser objects that have previously been freed, resulting in a potentially exploitable crash when these references are used. This vulnerability affects Thunderbird < 52.6, Firefox ESR < 52.6, and Firefox < 58. |
| A use-after-free vulnerability can occur when form input elements, focus, and selections are manipulated by script content. This results in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.6, Firefox ESR < 52.6, and Firefox < 58. |
| A use-after-free vulnerability can occur during XSL transformations when the source document for the transformation is manipulated by script content during the transformation. This results in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.6, Firefox ESR < 52.6, and Firefox < 58. |
| A use-after-free vulnerability can occur while editing events in form elements on a page, resulting in a potentially exploitable crash. This vulnerability affects Firefox ESR < 52.6 and Thunderbird < 52.6. |
| A use-after-free vulnerability can occur during WebRTC connections when interacting with the DTMF timers. This results in a potentially exploitable crash. This vulnerability affects Firefox ESR < 52.6 and Firefox < 58. |
| A use-after-free vulnerability can occur after deleting a selection element due to a weak reference to the select element in the options collection. This results in a potentially exploitable crash. This vulnerability affects Thunderbird < 60.4, Firefox ESR < 60.4, and Firefox < 64. |
