| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
zram: do not forget to endio for partial discard requests
As reported by Qu Wenruo and Avinesh Kumar, the following
getconf PAGESIZE
65536
blkdiscard -p 4k /dev/zram0
takes literally forever to complete. zram doesn't support partial
discards and just returns immediately w/o doing any discard work in such
cases. The problem is that we forget to endio on our way out, so
blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to
end_bio label, which does bio_endio(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp i3c: clean up notifier and buses if driver register fails
mctp_i3c_mod_init() registers the I3C bus notifier and then walks the
existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL)
before registering the I3C device driver. If i3c_driver_register()
fails, the function returns the error directly, leaving the notifier
registered and every mctp_i3c_bus object created for the existing buses
allocated. The notifier is left pointing into the module that failed to
load and the bus list is leaked.
Mirror the module exit path on this failure: unregister the notifier and
tear down the buses that were added before returning the error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. In versions prior to 1.7.18, the account-data trie syncers are vulnerable to a resource-exhaustion flaw that leaks bounded throttler slots on error paths. In syncDataTrie() (in both userAccountsSyncer.go and kappAccountsSyncer.go), StartProcessing() reserves a slot from the NumGoRoutinesThrottler, but the corresponding EndProcessing() is only called on the success path and on the duplicate-root early return. As a result, any error from trie.NewTrie(), trie.NewTrieSyncer(), or trieSyncer.StartSyncing() (including the network-dependent timeout path) permanently consumes one slot for the lifetime of the throttler. An attacker who can repeatedly cause trie-node sync failures or timeouts during bootstrap can exhaust the bounded throttler, after which further account-data trie syncs stop making progress and SyncAccounts() returns a timeout. Because epoch bootstrap in syncUserAccountsState() and syncKappAccountsState() aborts on any such error, this causes bootstrap to fail, a core availability issue affecting fresh, restarting, or resyncing nodes and validators. This issue is fixed in version 1.7.18. |
| HttpClient based on the classic i/o model fails to correctly release the underlying connection back to the connection manager if it encounters an invalid or unsupported `Content-Encoding` header value in the response message. Please note this defect does not affect HttpClient based on the async i/o model.
This issue affects Apache HttpComponents Client: from 5.0-alpha1 through 5.6.2. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: wake sq waiters when the transport closes
Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or
sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state
across transport teardown, pinning svc_xprt references and
blocking svc_rdma_free().
The close path sets XPT_CLOSE before invoking xpo_detach and both
wait_event predicates include an XPT_CLOSE term, but the
predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has
no completion-driven wake path; it is advanced solely by the
chained ticket handoff inside svc_rdma_sq_wait() itself. Without
an explicit wake at close, parked threads never observe
XPT_CLOSE, hold their svc_xprt_get reference forever, and
svc_rdma_free() blocks on xpt_ref dropping to zero.
Two close entry points reach this transport. Local teardown runs
svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() ->
xpo_detach() on a worker thread. A remote disconnect arrives at
svc_rdma_cma_handler(), which calls svc_xprt_deferred_close():
that sets XPT_CLOSE and enqueues the transport but does not
access either RDMA waitqueue, so a worker already parked in
svc_rdma_sq_wait() never re-evaluates its predicate. With every
worker parked on this transport, no thread is available to run
the local teardown either, and the wake site there is
unreachable.
Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper
that calls svc_xprt_deferred_close() and then wakes both
sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers
that called svc_xprt_deferred_close() directly:
svc_rdma_cma_handler(), qp_event_handler(),
svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop
path, the rw completion error paths, and the recvfrom flush and
read-list error paths.
Wake both waitqueues from svc_rdma_detach() as well. The
synchronous svc_xprt_close() path (backchannel ENOTCONN, device
removal via svc_rdma_xprt_done) reaches detach without flowing
through svc_xprt_deferred_close() and therefore does not invoke
the new helper.
[ cel: add svc_rdma_xprt_deferred_close() to complete the fix ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't leak PFN when kvm_translate_vncr() races MMU notifier
In the case that kvm_translate_vncr() races with an MMU notifier the
early return does not release a reference on the faulted in PFN. Add
the necessary call to kvm_release_faultin_page() for the unused PFN. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssm-prueth: fix eth_ports_node leak in probe
The error path on of_property_read_u32() failure inside
icssm_prueth_probe() returns without putting eth_ports_node,
which was acquired before the for_each_child_of_node() loop.
Drop it before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: tegra: fix pm_runtime leak on mutex_lock failure
If tegra_i2c_mutex_lock() fails, the function returns without calling
pm_runtime_put(), leaking the runtime PM reference acquired by the
preceding pm_runtime_get_sync(). This prevents the device from ever
entering runtime suspend.
Add the missing pm_runtime_put() before returning on lock failure. |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.17.0, turnports_allocate_even() in src/apps/relay/turn_ports.c marks the unused odd sibling port as TPS_TAKEN_ODD for an EVEN-PORT Allocate request with reservation bit R=0 even though no RTCP socket will release it, allowing an authenticated client to permanently exhaust the relay port pool and cause subsequent allocations to fail with STUN error 508. This issue is fixed in version 4.17.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
When check_stable_address_space() fails after the PMD spinlock has
been acquired via pmd_lock(), the code jumps directly to the abort
label, bypassing the spin_unlock() call in unlock_abort. This causes
the PMD spinlock to be permanently held, leading to a deadlock.
Change the goto target from abort to unlock_abort to ensure the
spinlock is always released on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: fix location monitor leak in tsi148 bridge
tsi148_probe() allocates a location monitor resource and links it into
tsi148_bridge->lm_resources. The probe error path frees this list, but
tsi148_remove() only frees the dma, slave and master resource lists, so
the location monitor resource is leaked on device unbind or module
unload.
Free the lm_resources list in tsi148_remove() as well, before
tsi148_bridge is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: npcm-video: fix memory leaks in probe and remove
npcm_video_probe() allocates the npcm_video structure with kzalloc_obj()
but never frees it on any probe error path or in npcm_video_remove(),
leaking the allocation on every failed probe and every normal unbind.
Additionally, when npcm_video_setup_video() fails, the reserved memory
association established by of_reserved_mem_device_init() in
npcm_video_init() is not released, leaking the rmem_assigned_device
entry on the global list.
Fix both by adding kfree(video) to all probe error paths and to
npcm_video_remove(), and adding the missing
of_reserved_mem_device_release() call when npcm_video_setup_video()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe
Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call
v4l2_subdev_init_finalize() which allocates the subdev active state,
but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup()
calls v4l2_subdev_cleanup() to free it.
This causes a memory leak on every rmmod, reported by kmemleak:
unreferenced object 0xffff0000d06fc800 (size 192):
comm "(udev-worker)", pid 254, jiffies 4294913455
backtrace (crc 36eeae58):
kmemleak_alloc+0x34/0x40
__kvmalloc_node_noprof+0x5f8/0x7d8
__v4l2_subdev_state_alloc+0x1fc/0x30c
__v4l2_subdev_init_finalize+0x178/0x368
Add the missing v4l2_subdev_cleanup() calls before media_entity_cleanup()
in both crossbar and pipe cleanup paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: prevent tstamp ring allocation for non-PF VSI types
The pf->txtime_txqs bitmap tracks which Tx queues have ETF (Earliest
TxTime First) offload enabled. This bitmap is indexed by queue number
and is set by ice_offload_txtime(), which only operates on PF VSI
queues.
However, ice_is_txtime_ena() does not check the VSI type before
consulting the bitmap. When ETF offload is enabled on PF Tx queue 0,
bit 0 is set in pf->txtime_txqs. During a subsequent PCI reset
rebuild, the CTRL VSI's Tx queue 0 is reconfigured and
ice_is_txtime_ena() is called for that ring. Since it only checks
pf->txtime_txqs by queue index without distinguishing VSI type, it
finds bit 0 set and returns true, matching the PF VSI's ETF queue,
not the CTRL VSI's. This causes ice_vsi_cfg_txq() to spuriously
allocate a tstamp_ring for the CTRL VSI ring.
Since CTRL VSI rings have no associated netdev, ice_clean_tx_ring()
takes an early return at the !netdev check before reaching
ice_free_tx_tstamp_ring(), leaking the allocation. Each PCI reset
leaks one 64-byte tstamp_ring.
Fix this by restricting ice_is_txtime_ena() to return true only for
PF VSI rings, since txtime_txqs is only meaningful for PF VSI queues. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix memory leak in bpf_jit_free()
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: fix FDIR filter leak on remove
Perfect FDIR filters can be added while the interface is down and are
kept on the software list for later restore. unregister_netdev() only
calls ndo_stop when the device is up, so txgbe_fdir_filter_exit() in
txgbe_close() is skipped in that case and the filters are leaked on
driver remove. Free the filter list from txgbe_remove() as well. |
| The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret > 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot.
The failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established — driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable.
Each failed attempt permanently leaks one descriptor; once the shared socket pool is exhausted, networking degrades device-wide until the device is rebooted, a denial-of-service condition. Severity is low because the leak rate is bounded by the configured OTA poll interval (default once per 24 hours), the effect is gradual and recovered by reboot, and only builds with the UpdateHub client enabled are affected. There is no memory-corruption, information-disclosure, or authentication impact. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: end fuse_req on io-uring cancel task work
When io_uring delivers task work with tw.cancel set (PF_EXITING,
PF_KTHREAD fallback, or percpu_ref_is_dying on the ring context),
fuse_uring_send_in_task() takes the cancel branch, assigns
-ECANCELED, and falls through to fuse_uring_send(). That path only
flips the entry to FRRS_USERSPACE and completes the io_uring cmd;
it never discharges the ring entry's owning reference to the
fuse_req that fuse_uring_add_req_to_ring_ent() handed it at
dispatch time.
fuse_uring_send_in_task()
tw.cancel == true
err = -ECANCELED
fuse_uring_send(ent, cmd, err, issue_flags)
ent->state = FRRS_USERSPACE
list_move(&ent->list, &queue->ent_in_userspace)
ent->cmd = NULL
io_uring_cmd_done(-ECANCELED)
/* ent->fuse_req still set, req still hashed */
The fuse_req stays linked on fpq->processing[hash] and
fuse_request_end() is never invoked. The originating syscall
thread blocks in D-state in request_wait_answer() until
fuse_abort_conn() runs, which can be the entire connection
lifetime. For FR_BACKGROUND requests fc->num_background is never
decremented either, so repeated cancels inflate the counter until
max_background is hit and all later background ops stall. tw.cancel does
not imply a connection abort (e.g. a single io_uring worker thread exits
while the fuse connection stays up), so this cannot be left for
fuse_abort_conn() to clean up.
Ending the req but still routing the entry through fuse_uring_send()
is not enough: that leaves a req-less entry on ent_in_userspace, and
ent_list_request_expired() dereferences ent->fuse_req unconditionally
on the head of that list, which would then NULL-deref.
Fix the cancel branch to release the entry directly. Remove it from the
queue, complete the io_uring cmd, end the fuse_req, free the entry, and
drop its queue_refs (waking the teardown waiter if it was the last). |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix potential skb leak in igc_fpe_xmit_smd_frame()
When igc_fpe_init_tx_descriptor() fails, no one takes care of an
allocated skb, leaking it. [1]
Use dev_kfree_skb_any() on failure.
Tested on an I226 adapter with the following command, while injecting
faults in igc_fpe_init_tx_descriptor() to trigger the error path.
# ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on
[1]
unreferenced object 0xffff888113c6cdc0 (size 224):
...
backtrace (crc be3d3fda):
kmem_cache_alloc_node_noprof+0x3b1/0x410
__alloc_skb+0xde/0x830
igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0
igc_fpe_send_mpacket+0x37/0x90
ethtool_mmsv_verify_timer+0x15e/0x300 |
