| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix UAF when sending a message
In afs_make_call(), there's a race with async call reception and
destruction. If a call is dispatched that doesn't have call->write_iter
set (used to specify the data content for FS.StoreData), then the first
rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr.
Once rxrpc_send_data() queues the last request packet, the response could
come in at any time and cause the call to be completed and put. However,
afs_make_call() will look at the call again to see it ->write_iter should
be handled - something it's only allowed to do if it has its own ref on the
call. Whilst this is the case for synchronous calls, it isn't true for
async calls such as FS.FetchData.
There's also a potential UAF in afs_make_call() in the event that an
asynchronous call is being sent, but the call fails in some way (e.g. it
gets aborted from the server). The problem there is that afs_make_call()
tries to abort a call if the rxrpc send fails, but the asynchronous
notification from rxrpc may have caused the afs_call to be torn down.
generic/650 plays games with randomly taking CPUs offline, and can
interject a significant delay such that the call is deallocated before
afs_make_call() gets to check call->write_iter - and a UAF ensues (caught
by KASAN).
BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs]
Read of size 8 at addr ffff888035e050e8 by task fsstress/1409
Fix this by making afs_make_op_call() give the op->call its own ref rather
than transferring the caller's ref to it and then dropping the ref when
afs_make_call() returns.
This also means that the afs_make_call() func never loses its ref on the
call now. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write
the toggle values to an already-freed page. Move free_page() after
bnxt_qplib_destroy_srq(). |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
rpcrdma_cm_event_handler() falls through to the disconnected: label
on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no
matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED.
The kref then underflows during connect teardown and
rpcrdma_xprt_disconnect() operates on a freed ep.
Reference counts across a normal connection lifecycle:
rpcrdma_ep_create() kref_init ->1
rpcrdma_xprt_connect() ep_get ->2 (before post_recvs)
RDMA_CM_EVENT_ESTABLISHED ep_get ->3
RDMA_CM_EVENT_DISCONNECTED ep_put ->2
rpcrdma_xprt_drain() ep_put ->1
rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy)
The connect-time get in rpcrdma_xprt_connect(), taken just before
rpcrdma_post_recvs() "while there are outstanding Receives," is
balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has
no get to consume, so its put drops the count to 1 and the drain
put then frees the ep while rpcrdma_xprt_disconnect() still holds a
pointer to it.
Fix by dispatching on the prior re_connect_status via xchg(): for
prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with
no put; for prev == 1 call rpcrdma_force_disconnect() and return.
The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED
event -- reliably delivered when rdma_disconnect() is called on a
still-connected cm_id -- to balance the ESTABLISHED get;
rpcrdma_xprt_drain() continues to balance only that connect-time
get. Any other prior value means teardown is already in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the helper function is valid in get_helper_proto
kernel test robot reported verifier bug [1] where the helper func
pointer could be NULL due to disabled config option.
As Alexei suggested we could check on that in get_helper_proto
directly. Marking tail_call helper func with BPF_PTR_POISON,
because it is unused by design.
[1] https://lore.kernel.org/oe-lkp/202507160818.68358831-lkp@intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling
__xa_store() and __xa_erase() were used without holding the proper lock,
which led to a lockdep warning due to unsafe RCU usage. This patch
replaces them with xa_store() and xa_erase(), which perform the necessary
locking internally.
=============================
WARNING: suspicious RCPU usage
6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Not tainted
-----------------------------
./include/linux/xarray.h:1211 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/u136:0/219:
at: process_one_work+0xbe4/0x15f0
process_one_work+0x75c/0x15f0
pagefault_mr+0x9a5/0x1390 [mlx5_ib]
stack backtrace:
CPU: 14 UID: 0 PID: 219 Comm: kworker/u136:0 Not tainted
6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
Call Trace:
dump_stack_lvl+0xa8/0xc0
lockdep_rcu_suspicious+0x1e6/0x260
xas_create+0xb8a/0xee0
xas_store+0x73/0x14c0
__xa_store+0x13c/0x220
? xa_store_range+0x390/0x390
? spin_bug+0x1d0/0x1d0
pagefault_mr+0xcb5/0x1390 [mlx5_ib]
? _raw_spin_unlock+0x1f/0x30
mlx5_ib_eqe_pf_action+0x3be/0x2620 [mlx5_ib]
? lockdep_hardirqs_on_prepare+0x400/0x400
? mlx5_ib_invalidate_range+0xcb0/0xcb0 [mlx5_ib]
process_one_work+0x7db/0x15f0
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x57d/0xcd0
? rescuer_thread+0xc40/0xc40
kthread+0x3b3/0x800
? kthread_is_per_cpu+0xb0/0xb0
? lock_downgrade+0x680/0x680
? do_raw_spin_lock+0x12d/0x270
? spin_bug+0x1d0/0x1d0
? finish_task_switch.isra.0+0x284/0x9e0
? lockdep_hardirqs_on_prepare+0x284/0x400
? kthread_is_per_cpu+0xb0/0xb0
ret_from_fork+0x2d/0x70
? kthread_is_per_cpu+0xb0/0xb0
ret_from_fork_asm+0x11/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: update channel list in reg notifier instead reg worker
Currently when ath11k gets a new channel list, it will be processed
according to the following steps:
1. update new channel list to cfg80211 and queue reg_work.
2. cfg80211 handles new channel list during reg_work.
3. update cfg80211's handled channel list to firmware by
ath11k_reg_update_chan_list().
But ath11k will immediately execute step 3 after reg_work is just
queued. Since step 2 is asynchronous, cfg80211 may not have completed
handling the new channel list, which may leading to an out-of-bounds
write error:
BUG: KASAN: slab-out-of-bounds in ath11k_reg_update_chan_list
Call Trace:
ath11k_reg_update_chan_list+0xbfe/0xfe0 [ath11k]
kfree+0x109/0x3a0
ath11k_regd_update+0x1cf/0x350 [ath11k]
ath11k_regd_update_work+0x14/0x20 [ath11k]
process_one_work+0xe35/0x14c0
Should ensure step 2 is completely done before executing step 3. Thus
Wen raised patch[1]. When flag NL80211_REGDOM_SET_BY_DRIVER is set,
cfg80211 will notify ath11k after step 2 is done.
So enable the flag NL80211_REGDOM_SET_BY_DRIVER then cfg80211 will
notify ath11k after step 2 is done. At this time, there will be no
KASAN bug during the execution of the step 3.
[1] https://patchwork.kernel.org/project/linux-wireless/patch/20230201065313.27203-1-quic_wgong@quicinc.com/
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: hyperv_fb: Allow graceful removal of framebuffer
When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to
release the framebuffer forcefully. If this framebuffer is in use it
produce the following WARN and hence this framebuffer is never released.
[ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40
< snip >
[ 44.111289] Call Trace:
[ 44.111290] <TASK>
[ 44.111291] ? show_regs+0x6c/0x80
[ 44.111295] ? __warn+0x8d/0x150
[ 44.111298] ? framebuffer_release+0x2c/0x40
[ 44.111300] ? report_bug+0x182/0x1b0
[ 44.111303] ? handle_bug+0x6e/0xb0
[ 44.111306] ? exc_invalid_op+0x18/0x80
[ 44.111308] ? asm_exc_invalid_op+0x1b/0x20
[ 44.111311] ? framebuffer_release+0x2c/0x40
[ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb]
[ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus]
[ 44.111323] device_remove+0x40/0x80
[ 44.111325] device_release_driver_internal+0x20b/0x270
[ 44.111327] ? bus_find_device+0xb3/0xf0
Fix this by moving the release of framebuffer and assosiated memory
to fb_ops.fb_destroy function, so that framebuffer framework handles
it gracefully.
While we fix this, also replace manual registrations/unregistration of
framebuffer with devm_register_framebuffer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
During the update procedure, when overwrite element in a pre-allocated
htab, the freeing of old_element is protected by the bucket lock. The
reason why the bucket lock is necessary is that the old_element has
already been stashed in htab->extra_elems after alloc_htab_elem()
returns. If freeing the old_element after the bucket lock is unlocked,
the stashed element may be reused by concurrent update procedure and the
freeing of old_element will run concurrently with the reuse of the
old_element. However, the invocation of check_and_free_fields() may
acquire a spin-lock which violates the lockdep rule because its caller
has already held a raw-spin-lock (bucket lock). The following warning
will be reported when such race happens:
BUG: scheduling while atomic: test_progs/676/0x00000003
3 locks held by test_progs/676:
#0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830
#1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500
#2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0
Modules linked in: bpf_testmod(O)
Preemption disabled at:
[<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500
CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11
Tainted: [W]=WARN, [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
__schedule_bug+0x120/0x170
__schedule+0x300c/0x4800
schedule_rtlock+0x37/0x60
rtlock_slowlock_locked+0x6d9/0x54c0
rt_spin_lock+0x168/0x230
hrtimer_cancel_wait_running+0xe9/0x1b0
hrtimer_cancel+0x24/0x30
bpf_timer_delete_work+0x1d/0x40
bpf_timer_cancel_and_free+0x5e/0x80
bpf_obj_free_fields+0x262/0x4a0
check_and_free_fields+0x1d0/0x280
htab_map_update_elem+0x7fc/0x1500
bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43
bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e
bpf_prog_test_run_syscall+0x322/0x830
__sys_bpf+0x135d/0x3ca0
__x64_sys_bpf+0x75/0xb0
x64_sys_call+0x1b5/0xa10
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
</TASK>
It seems feasible to break the reuse and refill of per-cpu extra_elems
into two independent parts: reuse the per-cpu extra_elems with bucket
lock being held and refill the old_element as per-cpu extra_elems after
the bucket lock is unlocked. However, it will make the concurrent
overwrite procedures on the same CPU return unexpected -E2BIG error when
the map is full.
Therefore, the patch fixes the lock problem by breaking the cancelling
of bpf_timer into two steps for PREEMPT_RT:
1) use hrtimer_try_to_cancel() and check its return value
2) if the timer is running, use hrtimer_cancel() through a kworker to
cancel it again
Considering that the current implementation of hrtimer_cancel() will try
to acquire a being held softirq_expiry_lock when the current timer is
running, these steps above are reasonable. However, it also has
downside. When the timer is running, the cancelling of the timer is
delayed when releasing the last map uref. The delay is also fixable
(e.g., break the cancelling of bpf timer into two parts: one part in
locked scope, another one in unlocked scope), it can be revised later if
necessary.
It is a bit hard to decide the right fix tag. One reason is that the
problem depends on PREEMPT_RT which is enabled in v6.12. Considering the
softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced
in v5.15, the bpf_timer commit is used in the fixes tag and an extra
depends-on tag is added to state the dependency on PREEMPT_RT.
Depends-on: v6.12+ with PREEMPT_RT enabled |
| Improper privilege management in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a04f5d
("net: fix removing a namespace with conflicting altnames") fixed it.
cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix.
Let's generalise the fix by removing conflicting altnames for dying
netns in __dev_change_net_namespace().
[0]:
cfg80211_switch_netns(rdev, &init_net)
WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160
Modules linked in:
CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: netns cleanup_net
RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871
Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e
RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293
RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000
R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000
R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20
FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253
cleanup_net+0x572/0x810 net/core/net_namespace.c:706
process_one_work kernel/workqueue.c:3387 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:__srcu_read_unlock+0xb/0x20
Call Trace:
nvme_find_get_ns+0x7d/0xb0 [nvme_core]
nvme_scan_ns_list+0xe8/0x280 [nvme_core]
nvme_scan_work+0x18a/0x280 [nvme_core]
process_one_work+0x197/0x380
worker_thread+0x2fe/0x410
kthread+0xe0/0x100
Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range()
and give it an open (start, end) NSID range. ctrl->namespaces is
sorted by NSID, so the whole gap is dropped in a single walk that
stops once end is reached. This bounds the work by the namespaces
that are present instead of by the size of the gap. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: don't rewrite bpf_fastcall patterns entered by a jump
mark_fastcall_pattern_for_call() must ensure that matched
"spill; call; fill" instruction series is not interrupted by a jump.
Otherwise the rewrite applied by bpf_remove_fastcall_spills_fills()
is not sound.
Record the instructions targeted by jumps in
insn_aux_data[*].jump_target when the CFG is built and use this flag
to stop growing a pattern at such an instruction. Jumps to the first
spill are fine.
Note that existing insn_aux_data[*].jmp_point field can't be reused,
as it marks subprogram return instructions. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check ancestor frames for rbtree callbacks
bpf_rbtree_add() invokes its comparator while the caller holds the root
lock. The native insertion code retains raw parent and link pointers across
the callback, so the verifier prohibits unlocking, consuming tree nodes,
or changing RCU state from that callback.
in_rbtree_lock_required_cb() only checks the innermost verifier frame.
Static subprogram calls are permitted while holding a spin lock, and such a
call pushes a frame without in_callback_fn set. Consequently, all callback
restrictions disappear in the nested frame. The subprogram can unlock the
tree, remove and drop the node being compared, then relock. Native insertion
resumes with the stale parent pointer and links freed memory into the tree.
Walk all active frames for the rbtree callback instead. Benign static
subprograms remain permitted, while callback restrictions follow execution
into nested frames. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't predict JMP32 pointer vs zero comparisons
Consider the following program:
r1 = map_value; /* low 32 bits are zero at runtime */
r6 = 0xdead000000000000;
if w1 != 0 goto l1;
l0: r1 += r6;
r2 = *(u64 *)(r1 + 0);
exit;
l1: r6 = 0;
goto l0;
At the moment is_branch_taken() reports the jump as always taken,
because it does not distinguish between BPF_JMP and BPF_JMP32
comparisons when processing 'if w1 != 0 ...'. |
