| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::GenericHub fromBufferDriver_handler deserialization is vulnerable because the receive handler uses FW_ASSERT for externally influenced deserialization status and type validation and permits a command payload size subtraction to underflow. When an unauthenticated inter-processor hub peer sends a truncated buffer, an invalid HubType, or a header-only command-dispatch payload, malformed hub traffic aborts or resets the process, causing denial of service. This issue is fixed in version 4.2.0. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because the wrapping sum bypasses file-range validation, becomes m_endOffset, and leaves m_byteOffset greater than the wrapped end offset. When an existing source file is larger than the supplied startOffset and a caller able to issue SendPartial supplies a length whose U32 sum with that offset wraps, the first data-packet send reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure
If register_netdev() fails for one of the MTK_MAX_DEVS devices in
mtk_probe(), the error path jumps to err_deinit_ppe, skipping
mtk_unreg_dev(). The previously registered net_devices are then freed by
mtk_free_dev() while still in NETREG_REGISTERED state, hitting the
BUG_ON(dev->reg_state != NETREG_UNREGISTERED).
Route the register_netdev() failure to err_unreg_netdev so the net_devices
registered so far are properly unregistered before being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: don't WARN on benign flow_offload_alloc() failure
flow_offload_alloc() returns NULL when the conntrack entry is dying
(e.g. raced with a conntrack flush) or when the GFP_ATOMIC allocation
fails; both are expected under load and neither is a kernel bug. This
path runs from softirq on every committed packet, so with
panic_on_warn=1 an unprivileged user can panic the box just by racing
a conntrack flush against a `tc ... action ct commit` classifier.
Reproduced with a custom repro under QEMU: a small, fixed set of UDP
flows through `tc filter ... action ct commit` on lo, raced against
threads flooding bare ctnetlink CT_DELETE (flush) requests. Hits
WARNING: net/sched/act_ct.c:437 (tcf_ct_flow_table_add(), inlined
into tcf_ct_act() in this build) within ~15s on the unpatched kernel;
same setup is clean on the patched kernel. The fix itself is
behavior-preserving: both branches already did `goto err_alloc`
before and after, only the WARN is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve()
pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided
sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl()
and the WARN_ON() there, which is fatal at EL2. The existing
!sve_state_size test rejects such a length, but only after the macro has
run.
Check sve_vl_valid() before deriving the state size. A valid length
cannot yield a zero size, so the !sve_state_size test goes with it. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::Ccsds::SpacePacketDeframer dataIn_handler is vulnerable because the handler treats the minimum packet-length condition as FW_ASSERT rather than rejecting and returning the buffer. When a CCSDS telecommand frame leaves a payload of six bytes or fewer after TcDeframer removes its header and trailer, the assertion aborts or resets the flight-software process, causing denial of service. This issue is fixed in version 4.2.0. |
| A Reachable Assertion vulnerability in the
l2ald
daemon of Juniper Networks Junos OS and Junos OS Evolved devices configured for MC-LAG/ICCP allows an adjacent attacker to cause a denial of service via an inconsistent ICCP peer message. |
| A Reachable Assertion vulnerability in the srxpfe process of Juniper Networks Junos OS on SRX Series allows an adjacent network attacker to cause a denial of service of the data plane via malformed firewall-authentication synchronization traffic on chassis-cluster fabric interfaces. |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Security: Encryption). Supported versions that are affected are MySQL Server: 26.7.0-26.7.1; MySQL Cluster: 26.7.0-26.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| The Redis server command parser in Apache bRPC accepts an empty RESP array as a command header. A remote unauthenticated attacker who can reach a bRPC server with Redis service enabled can send an empty array header followed by a bulk string, causing an out-of-bounds write in the parser and crashing the process.
Root Cause:
RedisCommandParser::ConsumeImpl rejected negative RESP array counts but accepted zero. It resized the command argument vector to zero elements and continued parsing. When a following bulk string was parsed, the only index guard was a CHECK. In configurations where fatal logs do not abort immediately, execution could continue and write to _args[0] even though the vector was empty.
Affected Scenarios:
Deployments that enable ServerOptions.redis_service and accept Redis protocol traffic from untrusted clients. The issue is reached during parsing before command handling or authentication.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3354
Note:
The fix rejects empty RESP arrays as invalid Redis commands and replaces the internal index CHECK with an explicit parse error so malformed command streams cannot fall through to an indexed vector write. |
| A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service.
Root Cause:
In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process.
Affected Scenarios:
Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3462
Note:
The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0). |
| Enforceable assertion in the streaming feature of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a malformed stream feedback frame.
Root Cause:
When handling FRAME_TYPE_FEEDBACK frames, bRPC calls Stream::SetRemoteConsumed() which contains CHECK(_cur_buf_size > 0) and unconditionally asserts CHECK(buf.IsEmpty()) on the frame payload. A feedback frame that carries an unexpected payload, or a feedback frame received on a stream where flow control is disabled (cur_buf_size == 0), reaches these assertions. On failure, CHECK failures abort the process, allowing an unauthenticated single client (once a stream is established) to terminate the server and cause a denial of service.
Affected Scenarios:
Use bRPC server with the streaming control feature (Stream API) served from untrusted network.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3494
The fix rejects malformed feedback frames with EPROTO and closes only the affected stream instead of crashing the whole process, and it bounds buffer shrinking so cur_buf_size never drops to 0 while flow control is enabled. |
| A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service.
Root Cause:
When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well).
Affected Scenarios:
Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3510
Note:
After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76491 are related to issues concerning reachable assertions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-617. |
| A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect.
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: InnoDB). Supported versions that are affected are MySQL Server: 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 9.7.0-9.7.3 and 26.7.0-26.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster as well as unauthorized update, insert or delete access to some of MySQL Server, MySQL Cluster accessible data. CVSS 3.1 Base Score 5.5 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:L/A:H). |
| Reachable exit in NTPsec ntpd 1.1.4 through 1.2.5 allows a remote attacker to terminate the daemon via an NTS request with excess NTS Cookie Placeholder extension fields. |
| A recursive BIND server that receives a query with recursion desired (RD=1) followed by a non-recursive query (RD=0) may exit with an assertion failure, resulting in a denial of service. To be vulnerable, the BIND server must allow recursive queries and have at least two RPZ zones configured: one with the default setting of "recursive-only yes", and the other with "recursive-only no".
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
Take the following unprivileged program as an example:
r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */
...
14: r0 += r1 /* r1 is a bounded scalar */
15: r9 = r0
Loading it triggers a verifier warning from reg_bounds_sanity_check():
verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out
of sync with range bounds r64={.base=0x0, .size=0x0}
r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0)
What happens:
1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new
offset is computed into dst_reg's var_off and 32/64-bit ranges.
2. Because pointer registers do not track 32-bit subregister bounds,
__mark_reg32_unbounded() first sets r32 to the full range; r32 is
re-derived from the offset at the end of the function by
reg_bounds_sync().
3. On the unprivileged path, sanitize_ptr_alu() is called and, via
sanitize_speculative_path() -> push_stack(), snapshots the current
register state and schedules the next instruction (insn 15) to be
verified directly as a speculative path.
4. That snapshot is taken between step 2 and the final reg_bounds_sync():
at this point dst_reg's var_off still holds the (const) original
offset while r32 has just been blanked to the full range, i.e. the two
are out of sync. When the speculative path later verifies insn 15
(r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and
trips the warning.
var_off and the 32-bit range must always be consistent. There are two
ways to keep the snapshot consistent:
1. sync var_off and r32 before the snapshot so they match, or
2. leave r32 at its original (already consistent) value and blank it
only after the snapshot.
The whole point of sanitize_ptr_alu() is to insert a harmless masking
sequence that keeps the access in bounds under speculation, so the state
it snapshots should faithfully represent that. Take approach 2: move
__mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative
snapshot keeps the pointer's original, consistent r32. The non-speculative
path is unchanged: r32 is still blanked before the offset is applied and
re-derived by reg_bounds_sync(). |
| IBM Cyber Fraud 1.0.0 through 1.0.2 has a missing secure attribute allowing sensitive cookies to be transmitted over unencrypted connections, potentially enabling an attacker to intercept session data through network-based attacks. |
