| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote unauthenticated BGP peer to cause a denial of service via a specific BGP FlowSpec update received by an affected BGP session. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated remote BGP neighbor to cause a denial of service via a VPN-flowspec BGP update if it is readvertised and BMP post-policy RIB-out monitoring is configured. |
| A NULL Pointer Dereference vulnerability in the na-grpcd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated attacker with access to the chassis-internal network to cause a denial of service via a network message. |
| A NULL Pointer Dereference vulnerability in the rpd process of Juniper Networks Junos OS on MX Series and Junos OS Evolved on ACX Series allows an unauthenticated adjacent attacker to cause a denial of service via an IGMPv3 membership report received on a directly connected network. |
| A NULL Pointer Dereference vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial-of-service condition via a malformed PIM Bidir message. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent network attacker to cause a denial of service via a crafted RSVP packet when MPLS-TE RSVP processing is enabled. The condition can terminate rpd and disrupt routing protocol sessions. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote BGP peer to cause a denial of service when multiple UPDATEs occur over a single TCP session with 'bgp family l2vpn auto-discovery-only' configured. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated configured MSDP peer or adjacent PIM sender to cause a denial of service via an MSDP or PIM policy that uses AS-path expansion. |
| A NULL Pointer Dereference vulnerability in the pkid component of Juniper Networks Junos OS allows an unauthenticated remote attacker to cause a denial of service via a malformed packet received during CMP enrollment or automatic certificate re-enrollment. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured eBGP peer to cause a persistent routing-daemon denial of service via a specific BGP packet when ephemeral configuration is used. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial of service via LDP messages received over an operational LDP session. |
| A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following version:
Qsync Central 5.0.0.4 and later |
| A NULL Pointer Dereference vulnerability in the routing-policy nexthop-ECMP matcher of Juniper Networks Junos OS and Junos OS Evolved allows a configured eBGP peer to cause a routing-daemon denial of service via a specific BGP packet received while a nexthop-ecmp qualifier is attached to a BGP import policy. |
| A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following version:
Qsync Central 5.0.0.4 and later |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent lock owner use-after-free during client teardown
__destroy_client() releases a client's open owners, but a lock owner
whose only reference is a blocked lock (nbl) stays on
cl_ownerstr_hashtbl. client_has_state() does not count a bare owner,
so DESTROY_CLIENTID can reach __destroy_client() with such owners
present.
__destroy_client() then walks the table, calling remove_blocked_locks()
on each owner without a reference. Freeing a blocked lock drops the
owner reference held via flc_owner. The per-net laundromat reaps
blocked locks from nn->blocked_locks_lru independently of client state.
The two paths share blocked_locks_lock only for the list splice, not
the owner's lifetime. The laundromat therefore frees the owner as
__destroy_client() dereferences it, a NULL dereference in
remove_blocked_locks().
nfsd4_release_lockowner() holds a reference across the same call;
__destroy_client() does not. Hold cl_lock across the walk, taking a
reference and unhashing each owner, then drop it before
remove_blocked_locks() and nfs4_put_stateowner(), which take
blocked_locks_lock and cl_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: Fix NULL pointer dereference in TPA fragment processing
Under memory pressure, the qede driver encounters NULL pointer
dereferences when processing TPA continuation fragments.
Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally
dropped the assignment of tpa_info->buffer.data in qede_tpa_start().
When memory pressure causes an SKB allocation failure in qede_tpa_start(),
the driver sets tpa_start_fail = true and attempts to recycle the physical
page later in qede_tpa_end() via qede_reuse_page(). However, because
buffer.data was left uninitialized (NULL), qede_reuse_page() pushes a
"ghost" BD (valid DMA mapping but NULL data pointer) back into the
active Rx ring.
The next time the hardware uses this ring slot, it passes a NULL page
to qede_fill_frag_skb(), causing a kernel panic.
Example crash from production system:
BUG: unable to handle kernel NULL pointer dereference at 0x8
RIP: qede_fill_frag_skb+0x96/0x430 [qede]
Call Trace:
qede_rx_int+0xb06/0x1de0
qede_poll+0x2f4/0x6c0
__napi_poll+0x2d/0x130
Fix the root cause by restoring the tpa_info->buffer.data assignment
in qede_tpa_start(), ensuring valid pages are correctly tracked and
recycled. Additionally, update the stale comment for
struct qede_agg_info::buffer to reflect its current usage. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix NULL deref on untransmitted RECONF completion
sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and
sctp_process_strreset_resp() complete a pending stream reconfiguration
request by stopping the reconf timer on the transport it was sent on:
t = asoc->strreset_chunk->transport;
if (timer_delete(&t->reconf_timer))
sctp_transport_put(t);
chunk->transport is assigned by __sctp_packet_append_chunk() when the
chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms
the reconf timer at that same point. A request already published in
asoc->strreset_chunk but not yet transmitted has neither, so completing
it dereferences NULL.
Two ways to get there. sctp_send_asconf_del_ip() sets
asoc->src_out_of_asoc_ok without sending anything when the address being
removed is the association's last one, and sctp_outq_flush_ctrl() then
leaves every non-ASCONF control chunk queued; as only
sctp_process_asconf_ack() clears that flag, it persists. An unprivileged
process that removes such an address and then asks for a stream reset
panics the kernel from softirq. A peer needs neither ASCONF nor local
help: sctp_cmd_interpreter() uncorks the outqueue only once the whole
packet has been processed, so a reply built while walking a RECONF chunk
stays untransmitted for the rest of that walk, and one RECONF chunk
carrying [Incoming SSN Reset Request, Outgoing SSN Reset Request,
Response] -- or two RECONF chunks in one packet -- reaches the same
dereference.
KASAN: null-ptr-deref in range [0x00000000000001e8-0x00000000000001ef]
RIP: 0010:timer_delete+0x67/0x110
Call Trace:
<IRQ>
sctp_process_strreset_addstrm_out (net/sctp/stream.c:832)
sctp_sf_do_reconf (net/sctp/sm_statefuns.c:4212)
sctp_do_sm (net/sctp/sm_sideeffect.c:1172)
sctp_assoc_bh_rcv (net/sctp/associola.c:1044)
sctp_rcv (net/sctp/input.c:243)
ip_local_deliver (net/ipv4/ip_input.c:262)
process_backlog (net/core/dev.c:6680)
</IRQ>
A response can only acknowledge a request that was actually sent, so do
not match asoc->strreset_chunk while chunk->transport is NULL. Guarding
the lookup covers all three completion sites. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE
In the iblock_execute_pr_out() function, PRO_PREEMPT,
PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability
checks through ops->pr_clear. The error check allows unimplemented hooks
to pass through the gate, resulting dereferencing a NULL function
pointer.
Check whether the hooks that need to be called are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
The airq_iv_create() can return NULL on failure, but the return value was
never checked. If it fails, zdev->aibv will be NULL and fail when
dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the
previously allocated AISB bit and zdev->aisb on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: Fix slave registration race and error handling
In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.
Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave. The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.
Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler. |
