| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: fix double aggregation of flush-marked skbs
Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO
packet.") added a flush check to skb_gro_receive(), but
skb_gro_receive_list() lacks the same validation.
As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be
re-aggregated.
This allows already-GRO'd packets with existing frag_list to be
re-aggregated into a new GRO session, corrupting the frag_list chain
structure. When skb_segment() attempts to unpack these malformed packets,
it encounters invalid state and triggers a kernel panic.
Scenario (Tethering/Device forwarding):
1. Driver: Generated aggregated packet P1 via LRO with frag_list
2. Dev A: Receives aggregated fraglist packet and flush flag set
3. Dev A: Re-enters GRO, skb_gro_receive_list() is called
4. Missing flush check allows re-aggregation despite flush flag
5. Frag_list chain becomes corrupted (loops or dangling refs)
6. Dev B: TX path calls skb_segment(), crashes on corrupted frag_list
Root cause in skb_segment():
The check at line ~4891:
if (hsize <= 0 && i >= nfrags && skb_headlen(list_skb) &&
(skb_headlen(list_skb) == len || sg)) {
When frag_list is corrupted by double aggregation, when list_skb is
a NULL pointer from skb->next, skb_headlen(list_skb) dereference
NULL/corrupted pointers occurs.
Call Trace:
skb_headlen(NULL skb)
skb_segment
tcp_gso_segment
tcp4_gso_segment
inet_gso_segment
skb_mac_gso_segment
__skb_gso_segment
skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
qdisc_restart
__qdisc_run
qdisc_run
net_tx_action
Fix: Add NAPI_GRO_CB(skb)->flush validation to the early-return check in
skb_gro_receive_list(), matching the defensive programming pattern of
skb_gro_receive(). |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: cros_ec: Delay dev_set_drvdata() until probe success
If ec_device_probe() fails, cros_ec_class_release releases memory for the
cros_ec_dev structure. However, because the drvdata was already set,
sub-drivers like cros_ec_typec can still retrieve the stale pointer via the
platform device. This leads to a use-after-free when cros_ec_typec attempts
to access &typec->ec->ec->dev on a device that has already been released.
Move dev_set_drvdata() to ensure that the pointer is only made available
once all initialization steps have succeeded.
sysfs: cannot create duplicate filename '/class/chromeos/cros_ec'
Call trace:
sysfs_do_create_link_sd+0x94/0xdc
sysfs_create_link+0x30/0x44
device_add_class_symlinks+0x90/0x13c
device_add+0xf0/0x50c
ec_device_probe+0x150/0x4f0
platform_probe+0xa0/0xe0
...
BUG: KASAN: invalid-access in __memcpy+0x44/0x230
Write at addr f5ffff809e2d33ac by task kworker/u32:5/125
Pointer tag: [f5], memory tag: [fe]
Tainted : [W]=WARN, [O]=OOT_MODULE
Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__memcpy+0x44/0x230
cros_ec_check_features+0x60/0xcc [cros_ec_proto]
cros_typec_probe+0xe8/0x6e0 [cros_ec_typec]
platform_probe+0xa0/0xe0 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
When the TLC notification disables AMSDU for a TID, the MLD driver sets
max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in
iwl_mld_tx_tso_segment() checks for zero but not for this sentinel,
allowing it to reach the num_subframes calculation:
num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad)
= (1 + 2) / (1534 + 2) = 0
This zero propagates to iwl_tx_tso_segment() which sets:
gso_size = num_subframes * mss = 0
Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny
segments from a single GSO skb. This floods the TX ring with ~1024
micro-frames (the rest are purged), creating a massive burst of TX
completion events that can lead to memory corruption and a subsequent
use-after-free in TCP's retransmit queue (refcount underflow in
tcp_shifted_skb, NULL deref in tcp_rack_detect_loss).
The MVM driver is immune because it checks mvmsta->amsdu_enabled before
reaching the num_subframes calculation. The MLD driver has no equivalent
bitmap check and relies solely on max_tid_amsdu_len, which does not
catch the sentinel value.
Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the
existing check and falling back to non-AMSDU TSO segmentation. Also add
a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth
to catch any future code paths that produce zero through a different
mechanism. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix locking in .getsockopt
Mirror iucv_sock_setsockopt() and wrap the whole switch in
lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock
becomes redundant and is removed.
Any AF_IUCV HIPER user can potentially crash the kernel by racing
recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences
iucv->hs_dev->mtu after iucv_sock_close() (called from the racing
recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference
oops. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
The change_work was introduced to send device change notifications
from DPLL device callbacks without deadlocking on dpll_lock, since
the callbacks are already invoked under that lock. Now that
__dpll_device_change_ntf() is exported for callers that already
hold dpll_lock, use it directly and remove the change_work
infrastructure entirely.
This eliminates a race condition where change_work could be
re-scheduled after cancel_work_sync() during device teardown,
potentially causing the handler to dereference a freed or NULL
dpll_dev pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release layout stid on setlease failure
nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via
idr_alloc_cyclic() under cl_lock before returning to
nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then
fails, the error path frees the layout stateid directly with
kmem_cache_free() without ever calling idr_remove(), leaving the
IDR slot pointing at freed slab memory. Any subsequent IDR walker
(states_show, client teardown) dereferences the dangling pointer.
The correct teardown for an IDR-published stid is nfs4_put_stid(),
which removes the IDR slot under cl_lock, dispatches sc_free
(nfsd4_free_layout_stateid) to release ls->ls_file via
nfsd4_close_layout(), and drops the nfs4_file reference in its
tail.
A second issue blocks that switch: nfsd4_free_layout_stateid()
unconditionally inspects ls->ls_fence_work via
delayed_work_pending() under ls_lock, but
INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only
after the setlease call. On the setlease-failure path the
destructor would touch an uninitialized delayed_work.
nfsd4_alloc_layout_stateid()
nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */
nfsd4_layout_setlease() /* fails */
nfs4_put_stid()
nfsd4_free_layout_stateid()
delayed_work_pending(&ls->ls_fence_work) /* needs INIT */
nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */
put_nfs4_file()
Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK
initialization above the nfsd4_layout_setlease() call, and replace
the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup
with a single nfs4_put_stid(stp). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/flexfiles: reject zero filehandle version count
ff_layout_alloc_lseg() decodes the filehandle-version array count
from the flexfiles layout body. The value is used as the count for
kzalloc_objs(), and the current code only rejects NULL.
A zero count yields ZERO_SIZE_PTR, which can be stored in
dss_info->fh_versions even though later flexfiles paths assume that at
least one filehandle version exists.
Reject fh_count == 0 before the allocation, matching the existing zero
version_count validation in the flexfiles GETDEVICEINFO parser.
A QEMU/KASAN run with a malformed flexfiles layout hit:
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750
ff_layout_encode_layoutreturn+0x683/0x970
nfs4_xdr_enc_layoutreturn+0x278/0x3a0
Kernel panic - not syncing: Fatal exception
The patched kernel rejects the malformed layout without KASAN/oops/panic,
and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams
snd_pcm_drain() uses init_waitqueue_entry which does not clear
entry.prev/next, and add_wait_queue with a conditional
remove_wait_queue that is skipped when to_check is no longer
in the group after concurrent UNLINK. The orphaned wait entry
remains on the unlinked substream sleep queue. On the next
drain iteration, add_wait_queue adds the entry to a new queue
while still linked on the old one, corrupting both lists. A
subsequent wake_up dereferences NULL at the func pointer
(mapped from the spinlock at offset 0 of the misinterpreted
wait_queue_head_t), causing a kernel panic.
Replace init_waitqueue_entry/add_wait_queue/conditional
remove_wait_queue with init_wait_entry/prepare_to_wait/
finish_wait. init_wait_entry clears prev/next via
INIT_LIST_HEAD on each iteration and sets
autoremove_wake_function which auto-removes the entry on
wake-up. finish_wait safely handles both the already-removed
and still-queued cases. |
| In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf
netvsc_copy_to_send_buf() copies page buffer entries into the VMBus
send buffer using phys_to_virt() on the entry PFN. Entries for the
RNDIS header and the skb linear data come from kmalloc'd memory and
are always in the kernel direct map, but entries for skb fragments
reference page cache or user pages, which on 32-bit x86 with
CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page
phys_to_virt() returns an address outside the direct map and the
subsequent memcpy() faults on the transmit softirq path, which is
fatal.
Map the pages with kmap_local_page() instead, handling two properties
of the page buffer entries:
- pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity,
not a native PFN. Reconstruct the physical address first and derive
the native page from it, so the mapping stays correct where
PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages).
- Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN
grouping in the page buffer array"), an entry describes a full
physically contiguous fragment and pb[i].len can exceed PAGE_SIZE,
while kmap_local_page() maps a single page. Copy page by page,
splitting at native page boundaries.
The copy path only handles packets smaller than the send section size
(6144 bytes by default); larger packets take the cp_partial path where
only the RNDIS header is copied. So entries here are bounded by the
section size and a copy is split at most once on 4K-page systems. On
!CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and
no mapping work is added. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use RCU-safe iteration in dev_map_redirect_multi() SKB path
The DEVMAP_HASH branch in dev_map_redirect_multi() uses
hlist_for_each_entry_safe() to iterate hash buckets, but this function
runs under RCU protection (called from xdp_do_generic_redirect_map()
in softirq context). Concurrent writers (__dev_map_hash_update_elem,
dev_map_hash_delete_elem) modify the list using RCU primitives
(hlist_add_head_rcu, hlist_del_rcu).
hlist_for_each_entry_safe() performs plain pointer dereferences without
rcu_dereference(), missing the acquire barrier needed to pair with
writers' rcu_assign_pointer(). On weakly-ordered architectures (ARM64,
POWER), a reader can observe a partially-constructed node. It also
defeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-race
detection.
Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held()
as the lockdep condition, consistent with the rcu_dereference_check()
used in the DEVMAP (non-hash) branch of the same functions. Also fix
the same incorrect lockdep_is_held(&dtab->index_lock) condition in
dev_map_enqueue_multi(), where the lock is not held either. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via
xdp_master_redirect(). Full decoded trace:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: don't use simple_strtoul
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: handle empty bo and UAF races
There look to be some nasty races here when triggering the
invalidate_mappings hook:
1) We do xe_bo_alloc() followed by the attach, before the actual full bo
init step in xe_dma_buf_init_obj(). However the bo is visible on the
attachments list after the attach. This is bad since exporter driver,
say amdgpu, can at any time call back into our invalidate_mappings hook,
with an empty/bogus bo, leading to potential bugs/crashes.
2) Similar to 1) but here we get a UAF, when the invalidate_mappings
hook is triggered. For example, we get as far as xe_bo_init_locked()
but this fails in some way. But here the bo will be freed on error, but
we still have it attached from dma-buf pov, so if the
invalidate_mappings is now triggered then the bo we access is gone and
we trigger UAF and more bugs/crashes.
To fix this, move the attach step until after we actually have a fully
set up buffer object. Note that the bo is not published to userspace
until later, so not sure what the comment "Don't publish the bo
until we have a valid attachment", is referring to.
We have at least two different customers reporting hitting a NULL ptr
deref in evict_flags when importing something from amdgpu, followed by
triggering the evict flow. Hit rate is also pretty low, which would
hint at some kind of race, so something like 1) or 2) might explain
this.
v2:
- Shuffle the order of the ops slightly (no functional change)
- Improve the comment to better explain the ordering (Matt B)
(cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate dacloffset before building DACL pointers
parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.
On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.
Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`. |
