| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Microsoft Office Remote Code Execution Vulnerability |
| DirectX Elevation of Privilege Vulnerability |
| Windows Update Stack Setup Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_midi: cancel pending IN work before freeing the midi object
The f_midi driver embeds a work item (midi->work) whose handler,
f_midi_in_work(), dereferences the enclosing struct f_midi through
container_of(). This work is armed from two sites: f_midi_complete(),
on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSA
rawmidi output-stream start.
Neither f_midi_disable() nor f_midi_unbind() cancels midi->work.
f_midi_disable() only disables the endpoints and drains the in_req_fifo;
it does not synchronize the work item, and the sound card is released
asynchronously to the final free of the midi object.
The midi object is reference-counted (midi->free_ref) and is freed in
f_midi_free() only once both the usb_function reference and the rawmidi
private_data reference have been dropped. In f_midi_unbind(),
f_midi_disable() runs before the sound card is released, so while the
USB endpoints are already disabled the rawmidi device is still usable by
an open substream. A concurrent userspace write on such a substream can
reach f_midi_in_trigger() and queue midi->work again after
f_midi_disable() has returned. A work item armed this way may still be
pending when the last reference drops and f_midi_free() proceeds to
kfree(midi), letting f_midi_in_work() dereference the struct after it
has been freed, a use-after-free.
For this reason cancelling midi->work in f_midi_disable() would not be
sufficient: the ALSA trigger path can rearm the work after disable()
returns. Cancelling at the refcount-zero free site is the boundary
after which neither arming source can survive, because by then both
references that keep the midi object alive have been dropped: the USB
endpoints are already disabled and the rawmidi device has been released.
Fix this by calling cancel_work_sync(&midi->work) in the refcount-zero
block of f_midi_free(), before the embedded work_struct is freed along
with the rest of the structure. opts->lock is a sleeping mutex, so
calling cancel_work_sync() under it is permitted, and the handler takes
midi->transmit_lock rather than opts->lock, so no self-deadlock can
occur while it waits for a running instance of the work to finish.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate compound request size before reading StructureSize2
When ksmbd validates a compound (chained) SMB2 request,
ksmbd_smb2_check_message() reads pdu->StructureSize2 without first
checking that the compound element is large enough to contain it.
StructureSize2 is a 2-byte field at offset 64
(__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element.
The compound-walking logic only guarantees that a full 64-byte SMB2
header is present for the trailing element: when NextCommand is 0, len is
reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A
remote client can craft a compound request whose last element has exactly
64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte
past the receive buffer, producing a slab-out-of-bounds read.
BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14
The buggy address is located 172 bytes inside of allocated 173-byte region
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
handle_ksmbd_work (fs/smb/server/server.c:119)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Reject any compound element that is too small to hold StructureSize2
before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: check skb_pull_data() return in gtp1u_send_echo_resp()
gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its
caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr +
gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For
a 16-19 byte echo request the pull fails and returns NULL without
advancing skb->data; execution continues, and the following skb_push()
plus the IP header pushed by iptunnel_xmit() move skb->data below
skb->head, tripping skb_under_panic().
Fix it by dropping the packet when skb_pull_data() fails.
skbuff: skb_under_panic: ...
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:2648)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82)
gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920)
udp_queue_rcv_one_skb (net/ipv4/udp.c:2388)
...
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix NVM tag length underflow in TLV parser
In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is
"while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed
int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a
size_t (12), so "length" is converted to size_t and any firmware-supplied
"length" < 12 makes the subtraction wrap to a huge value. The loop body
then reads a 12-byte struct tlv_type_nvm past the end of the short
vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it).
Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both
operands are non-negative, so it no longer underflows and a "length" too
small for one record correctly skips the loop.
BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421)
Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52
Workqueue: hci0 hci_power_on
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617)
qca_uart_setup (drivers/bluetooth/btqca.c:948)
qca_setup (drivers/bluetooth/hci_qca.c:2029)
hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438)
hci_dev_open_sync (net/bluetooth/hci_sync.c:5227)
hci_power_on (net/bluetooth/hci_core.c:920)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245) |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: remove read access to debugfs files
The 'command' and 'netdev_ops' debugfs files are a legacy debugging
interface supported by the i40e driver since its early days by commit
02e9c290814c ("i40e: debugfs interface").
Both of these debugfs files provide a read handler which is mostly useless,
and which is implemented with questionable logic. They both use a static
256 byte buffer which is initialized to the empty string. In the case of
the 'command' file this buffer is literally never used and simply wastes
space. In the case of the 'netdev_ops' file, the last command written is
saved here.
On read, the files contents are presented as the name of the device
followed by a colon and then the contents of their respective static
buffer. For 'command' this will always be "<device>: ". For 'netdev_ops',
this will be "<device>: <last command written>". But note the buffer is
shared between all devices operated by this module. At best, it is mostly
meaningless information, and at worse it could be accessed simultaneously
as there doesn't appear to be any locking mechanism.
We have also recently received multiple reports for both read functions
about their use of snprintf and potential overflow that could result in
reading arbitrary kernel memory. For the 'command' file, this is definitely
impossible, since the static buffer is always zero and never written to.
For the 'netdev_ops' file, it does appear to be possible, if the user
carefully crafts the command input, it will be copied into the buffer,
which could be large enough to cause snprintf to truncate, which then
causes the copy_to_user to read beyond the length of the buffer allocated
by kzalloc.
A minimal fix would be to replace snprintf() with scnprintf() which would
cap the return to the number of bytes written, preventing an overflow. A
more involved fix would be to drop the mostly useless static buffers,
saving 512 bytes and modifying the read functions to stop needing those as
input.
Instead, lets just completely drop the read access to these files. These
are debug interfaces exposed as part of debugfs, and I don't believe that
dropping read access will break any script, as the provided output is
pretty useless. You can find the netdev name through other more standard
interfaces, and the 'netdev_ops' interface can easily result in garbage if
you issue simultaneous writes to multiple devices at once.
In order to properly remove the i40e_dbg_netdev_ops_buf, we need to
refactor its write function to avoid using the static buffer. Instead, use
the same logic as the i40e_dbg_command_write, with an allocated buffer.
Update the code to use this instead of the static buffer, and ensure we
free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on
multiple devices, and allows us to remove the now unused static buffer
along with removing the read access. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: Fix UAF on sco_sock_timeout
conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock
so this checks if the conn->sk is still valid by checking if it part of
sco_sk_list. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775) Fix access to temperature configuration registers
The number of temperature configuration registers does
not always match the total number of temperature registers.
This can result in access errors reported if KASAN is enabled.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core |
| A Cross-Site Scripting (XSS) and Cross-Site Request Forgery (CSRF) vulnerability exists when Power BI Report Server Template file (pbix) containing HTML files is uploaded to the server and HTML files are accessed directly by the victim.
Combining these 2 vulnerabilities together, an attacker is able to upload malicious Power BI templates files to the server using the victim's session and run scripts in the security context of the user and perform privilege escalation in case the victim has admin privileges when the victim access one of the HTML files present in the malicious Power BI template uploaded.
The security update addresses the vulnerability by helping to ensure that Power BI Report Server properly sanitize file uploads. |
| An information disclosure vulnerability manifests when a user or an application uploads unprotected private key data as part of an authentication certificate keyCredential on an Azure AD Application or Service Principal (which is not recommended). This vulnerability allows a user or service in the tenant with application read access to read the private key data that was added to the application.
Azure AD addressed this vulnerability by preventing disclosure of any private key values added to the application.
Microsoft has identified services that could manifest this vulnerability, and steps that customers should take to be protected. Refer to the FAQ section for more information.
For more details on this issue, please refer to the MSRC Blog Entry. |
| Active Directory Domain Services Elevation of Privilege Vulnerability |
| Windows Denial of Service Vulnerability |
| Microsoft Defender Remote Code Execution Vulnerability |
| Microsoft Word Remote Code Execution Vulnerability |
| Active Directory Domain Services Elevation of Privilege Vulnerability |
| Windows Core Shell SI Host Extension Framework for Composable Shell Elevation of Privilege Vulnerability |
| Windows Kernel Elevation of Privilege Vulnerability |
| NTFS Elevation of Privilege Vulnerability |
