| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect conversion between numeric types in Windows TCP/IP allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Infer zext_dst based on static register liveness analysis
As reported in the thread [1], the verifier's 32-bit operations zero
extension logic is broken. This logic is responsible for correct
semantics of 32-bit operations on s390 architecture.
According to BPF semantics, operation `w1 += 1` is supposed to zero
extend the upper half of the register `r1`. On s390 the JIT relies on
the verifier emitting explicit zero extension before such operations.
The verifier attempts to minimize the amount of zero extensions
inserted by tracking whether upper halves of the 64-bit registers are
ever used. Previously such tracking worked as follows:
- bpf_reg_state->subreg_def field was set by do_check_insn()
for each operation defining lower but not the upper halves
of the register.
- Whenever an operation reading the whole register was verified,
the verifier checked register's subreg_def and set
bpf_insn_aux_data->zext_dst flag as true via a call to
mark_insn_zext() function.
- After the verification was complete, a special pass
bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations
with bpf_insn_aux_data->zext_dst set as true by adding
explicit zero extension.
Note that the logic above relies on bpf_reg_state->subreg_def,
which is a property of a current verifier state.
Before the commit [2] two additional steps happened:
- The verifier tracked upper and lower register halves' liveness as
flags REG_LIVE_READ{32,64} in bpf_reg_state->live.
- The function propagate_liveness() called mark_insn_zext()
in order to transfer the knowledge about which registers have
their upper halves alive (and thus might require zero extension).
The commit [2] removed the two steps described above,
hence making possible a situation like below:
- The register's upper half is set and is used on some verification
path P1 and the register happens not to be marked as precise.
- The checkpoint C is created while processing some instruction
between register initialization and usage.
- On some other verification path P2 the register's upper half is not
initialized and that path ends hitting the checkpoint C.
- In such a case the register's initialization on path P2 would lack
zext_dst mark, making it possible for the program to inject
an arbitrary value in the register's upper half.
This commit replaces subreg_def based logic with computing zext_dst
statically, as a part of the bpf_compute_live_registers() analysis:
- The analysis now tracks usage of upper and lower halves of the
registers separately.
- If some instruction defines a 32-bit subregister, but not the whole
register, *and* the upper half of the register is alive after that
instruction, the instruction is marked as zext_dst.
There is one notable drop in precision: whenever a BPF subprogram is
called, all 64 bits of parameter registers are presumed to be used.
The assumption is that such a drop in precision would not inflict
a noticeable performance penalty.
[1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/
[2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness") |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: init_can_skb(): restore skb header initialization
Commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure")
removed the skb_reset_mac_header()/skb_reset_network_header()/
skb_reset_transport_header() calls from init_can_skb(). As a result, RX
skbs from alloc_can_skb() and friends again carry mac_header = 0xFFFF.
When such an skb reaches packet_rcv_spkt() (SOCK_PACKET), the push length
calculation overflows and triggers skb_under_panic -> kernel BUG -> full
machine panic.
The same issue was originally reported in 2014 on linux-can and fixed by
commit 969439016d2c ("can: add missing initialisations in CAN related
skbuffs"). packet_rcv_spkt() itself has never been hardened: only
packet_rcv() and tpacket_rcv() gained dev_has_header() checks in
commit d549699048b4 ("net/packet: fix packet receive on L3 devices
without visible hard header"). |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: guard the ll header push in packet_rcv_spkt()
packet_rcv_spkt() restores the link layer header with
skb_push(skb, skb->data - skb_mac_header(skb));
That subtraction is only meaningful when the device actually has a link
layer header. packet_rcv() and tpacket_rcv() both wrap it in
dev_has_header(), which is also the predicate the block comment at the
top of the file states the restore in terms of; packet_rcv_spkt() does
not. commit d549699048b4 ("net/packet: fix packet receive on L3
devices without visible hard header") introduced the helper and changed
the two call sites, and this one stayed behind.
A device without a visible ll header can leave skb->mac_header at the
0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does:
init_can_skb() sets pkt_type and ip_summed but does not reset the
headers, and commit 9f10374bb024 ("can: remove private CAN skb
headroom infrastructure") dropped the skb_reset_*_header() calls that
used to be there. skb_mac_header() is then 0xFFFF, the length becomes
a large negative number and skb_push() reports it through
skb_under_panic() -- from softirq context, so it is a full system panic
even with panic_on_oops=0:
skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x50/0x60
Call Trace:
<IRQ>
skb_push+0x38/0x40
packet_rcv_spkt+0xe1/0x170
__netif_receive_skb_core.constprop.0+0x7e8/0xd30
...
Kernel panic - not syncing: Fatal exception in interrupt
The socket type is reachable: packet_create() accepts SOCK_PACKET
alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check,
and neither the socket length nor a capability check keeps it away
from a CAN interface.
The missing skb_reset_*_header() calls in init_can_skb() are a
regression in their own right and are being fixed separately, but a
packet socket should not turn a link layer that did not initialise its
mac header into a kernel panic. Guard the push the way the other two
receive paths do.
Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is
the driver RX path: vcan does not reproduce it, because can_send()
resets the headers on the way out. One SOCK_PACKET socket bound to
can0 and one frame written into the line discipline panics an
unpatched kernel with the trace above; the same image with this patch
prints no panic and powers off normally. Both kernels are this tree,
defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. |
| Incorrect Calculation vulnerability in VillaTheme CURCY woo-multi-currency allows Integer Attacks.This issue affects CURCY: from n/a through 2.2.17. |
| A mailbox quota-accounting vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to consume another user’s mailbox quota by repeatedly sharing and revoking a document. Creation of the recipient’s shared-file record charges the document size to mailbox-wide usage. Revocation deletes the record and reverses its folder counters without reversing the mailbox-wide charge. Repeated normal share notifications therefore accumulate quota usage after the visible records are gone. On accounts with a finite quota, this can prevent incoming mail and other size-increasing operations without recipient interaction. The issue affects ZCS 10.1.16 and 10.1.20. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold()
__damon_va_prepare_access_check() picks a random byte address within the
region and stores it in r->sampling_addr. damon_va_mkold() passes it into
a page table walk, which hands it to damon_ptep_mkold() as the address of
the page to sample:
damon_va_mkold(mm, r->sampling_addr)
damon_va_walk_page_range(mm, addr, addr + 1)
damon_mkold_pmd_entry()
damon_ptep_mkold(pte, vma, addr)
ptep_test_and_clear_young(vma, addr, pte)
mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE)
For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing
of the young flag for large folios"), the contpte helper walked exactly
CONT_PTES entries from the aligned-down page table pointer and used @addr
only to pass down to each entry, so an unaligned value was harmless:
ptep = contpte_align_down(ptep);
addr = ALIGN_DOWN(addr, CONT_PTE_SIZE);
for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE)
Now the range to walk is derived from @addr instead: end = addr + nr *
PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of
a contpte block, the sub-page offset puts end just past the block
boundary, so the round-up lands a whole block further and the walk clears
PTE_AF in CONT_PTES entries beyond the sampled block. For the last block
in a page table page, those entries are past the end of that page, so the
walk writes into the page that follows.
Triggered by the full 7.1/7.2 kernel selftest suite on arm64 (EC2
c/m6g.4xlarge). The kernel sometimes crashes at or shortly after the
DAMON test.
What the overrun does depends on the page that happens to follow the page
table, so there is no single signature. If that page is read-only, the
write faults in the sampling path itself:
Unable to handle kernel write to read-only memory at virtual address ffff0003c5d2d000
FSC = 0x0f: level 3 permission fault
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
CPU: 10 UID: 0 PID: 3487 Comm: kdamond.2
pc : contpte_test_and_clear_young_ptes+0x70/0xc0
lr : damon_ptep_mkold+0x1e8/0x1f8
Call trace:
contpte_test_and_clear_young_ptes+0x70/0xc0 (P)
damon_mkold_pmd_entry+0x150/0x170
walk_pmd_range+0x110/0x2b0
walk_pud_range+0x10c/0x208
walk_pgd_range+0x134/0x258
__walk_page_range+0x98/0x1b0
walk_page_range_vma_unsafe+0x90/0x148
walk_page_range_vma+0x28/0x40
damon_va_walk_page_range+0x114/0x2b8
damon_va_prepare_access_checks+0xec/0x1a8
kdamond_fn+0x534/0x770
kthread+0x128/0x138
ret_from_fork+0x10/0x20
Otherwise the page is writable, the PTE_AF clearing succeeds silently and
the damage only surfaces later, in whatever happened to own the page, so
the backtrace is unrelated to DAMON and differs between runs.
Pass a page-aligned address to the ptep_test_and_clear_young() call in
damon_ptep_mkold(), which is the only place DAMON can reach
contpte_test_and_clear_young_ptes() from. Nothing else sees the aligned
address, and r->sampling_addr itself is left as is, so the sampling and
region bookkeeping semantics are unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: account only unread bytes in read_skb()
After a partial stream receive, rx_bytes tracks the unread suffix while
buf_used and peer credit still cover the whole packet.
virtio_transport_read_skb() dequeues that packet but passes pkt_len for
both counters, underflowing rx_bytes.
On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read
from a 100-byte packet made SIOCINQ report -40, an empty recv return
ELOOP, and poll report the empty socket readable. After verdict detach,
receiving 40 bytes wrapped the counter to zero and hid those queued bytes
until one more byte arrived. The fixed run kept the counter balanced
and exposed all queued data immediately.
This was found during an LLM-assisted manual source audit of VSOCK
receive accounting while re-evaluating virtio_transport_read_skb() after
CVE-2024-50169.
Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the
full packet length for buf_used and peer credit. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect()
bpf_flow_dissect() sanitizes the offsets returned by the BPF program
with clamp_t(u16, ..., hlen).
If hlen is bigger than 65535, the upper bound is truncated before
the comparison. For instance, with hlen == 65536, both nhoff and
thoff are forced to zero, even if the program returned sane values.
This is the same class of bug as the one fixed in commit 99bda1ecbd56
("flow_dissector: avoid u16 truncation of skb->len when computing
thoff"). That fix does not cover the BPF path, because
__skb_flow_dissect() returns early when a BPF flow dissector
handles the packet.
struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen
to U16_MAX before clamping.
Found by sashiko while reviewing the commit above. |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header().
syzbot reported BUG() in sock_sendmsg_nosec(). [0]
The problem is that tpacket_parse_header() casts user-provided
tpacket_hdr.tp_len, which is u32, to int.
If the length is larger than INT_MAX, the following condition
in tpacket_parse_header() passes,
if (unlikely(tp_len > size_max))
and any negative value can be returned to the caller, up to
sock_sendmsg_nosec().
The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast
to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec().
*(uint64_t*)0x200000000008 = 0xfffffdef;
...
syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul);
Let's define the local tp_len as u32 in tpacket_parse_header().
[0]:
kernel BUG at net/socket.c:803!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
RIP: 0010:sock_sendmsg_nosec+0x145/0x180 net/socket.c:803
Code: 06 67 48 0f b9 3a eb 95 e8 e8 3a 22 f8 48 89 df 4c 89 f6 4c 89 e2 4d 89 fb 2e e8 32 a5 5c 16 e9 51 ff ff ff e8 cc 3a 22 f8 90 <0f> 0b e8 c4 3a 22 f8 48 83 c3 18 48 89 d8 48 c1 e8 03 42 80 3c 28
RSP: 0018:ffffc90003aefb48 EFLAGS: 00010293
RAX: ffffffff89a578d4 RBX: ffff8880764c67c0 RCX: ffff88807fb23e80
RDX: 0000000000000000 RSI: 00000000fffffdef RDI: 00000000fffffdef
RBP: 00000000fffffdef R08: ffffc90003aef747 R09: 1ffff9200075dee8
R10: dffffc0000000000 R11: fffff5200075dee9 R12: 0000000000000001
R13: dffffc0000000000 R14: ffffc90003aefbc0 R15: ffffffff8aac4310
FS: 000055559101b400(0000) GS:ffff888124ce0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000210 CR3: 0000000073dca000 CR4: 00000000003526f0
Call Trace:
<TASK>
__sock_sendmsg net/socket.c:815 [inline]
sock_write_iter+0x2de/0x3e0 net/socket.c:1266
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f173130ecb9
Code: c0 79 93 eb d5 48 8d 7c 1d 00 eb 99 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 d8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd67e44248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f173130ecb9
RDX: 0000000000000001 RSI: 0000200000000000 RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd67e44388
R13: 0000000000000002 R14: 00002000000000c0 R15: 0000000000000002
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Size page table preallocation by device address
Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for
map() interface") passed the device address to
pvr_mmu_op_context_create(), but the preallocation is still sized from
device_addr + sgt_offset with an exclusive end. The offset into the
object's pages has no place in a device-virtual range, and the exclusive
end allocates one table too many when the range ends on a table
boundary.
Count the tables from device_addr and the inclusive end of the range.
The new calculation does not take page table indices into account. This
fixes another issue with the previous implementation, where the
difference between start and end indices could underflow when a mapping
crossed a page table boundary. This would lead to the driver
preallocating a huge number of MMU pages, exhausting system memory and
triggering an out of memory panic.
[Alessio: add paragraph to point out OOM bug being fixed, cc stable] |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Add validation for host-provided max_segs
The max_segs field is of type unsigned short, and if a host driver
sets an excessively large value, it may be truncated to zero. This
can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size
allocation request, which leads to undefined behavior.
Under the SLUB allocator, kmalloc(0) returns a special pointer
(ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to
true, and sg_init_table() will then attempt to access invalid memory,
resulting in a crash:
dwmmc_rockchip 2a310000.mmc: Successfully tuned phase to 133
mmc1: new UHS-I speed SDR104 SDHC card at address aaaa
Unable to handle kernel paging request at virtual address 0000001ffffffff0
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000102c88000
[0000001ffffffff0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 2 UID: 0 PID: 102 Comm: kworker/2:1 Not tainted 7.0.0-rc6-next-20260331-00013-g4d93c25963c5-dirty #80 PREEMPT
Hardware name: Rockchip RK3576 EVB V10 Board (DT)
Workqueue: events_freezable mmc_rescan
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sg_init_table+0x2c/0x50
lr : sg_init_table+0x24/0x50
sp : ffff8000837db710
x29: ffff8000837db710 x28: 000000000000c000 x27: 0000000000000300
x26: 0000000000000000 x25: 0000000000000040 x24: ffff0000c46a0000
x23: 0000000000000000 x22: ffff0000c0c73c00 x21: 0000000000000010
x20: 0000000000000010 x19: 0000000000000000 x18: 000000000000002c
x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000
x14: 0000000000000400 x13: ffff8000837dc000 x12: 0000000000000000
x11: ffff0000c0c73ca0 x10: 0000000000000040 x9 : 459ec1f0abbdbb00
x8 : 0000001fffffffe0 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000035579 x4 : 0000000000000901 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000010
Call trace:
sg_init_table+0x2c/0x50 (P)
mmc_mq_init_request+0x64/0x90
blk_mq_alloc_map_and_rqs+0x3ac/0x480
blk_mq_alloc_set_map_and_rqs+0x98/0x1e0
blk_mq_alloc_tag_set+0x1c0/0x290
mmc_init_queue+0x120/0x370
mmc_blk_alloc_req+0x150/0x420
To prevent this, add a validation check in mmc_mq_init_request() to
detect when sg_len (derived from max_segs) is zero. If sg_len is zero,
we return an error and print an error message, allowing host driver
developers to identify and fix incorrect max_segs configuration.
This is a defensive measure that ensures the MMC core fails gracefully
when host drivers provide invalid max_segs values, rather than crashing
with a page fault. |
| IBM MQ could allow an authenticated attacker to cause a denial of service through a specially crafted message that triggers excessive memory operations during character set conversion. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/gntalloc: validate grant count before allocation
gntalloc_ioctl_alloc() allocates the grant-id array before checking
whether the requested count fits within the global grant limit. Counts
above that limit cannot succeed, so reject them before the
user-controlled allocation reaches kcalloc().
Use a subtraction-based check while holding gref_mutex so adding the
requested count cannot wrap. Also cast the count before advancing the
per-file index so the page-size multiplication is performed in 64-bit
arithmetic. |
| A numeric-type conversion flaw in the BSON handling library of the MongoDB C# Driver allows an out-of-range binary subtype value supplied through untrusted textual input to bypass the library's binary-element integrity checks. When such a value is later encoded, it is narrowed to a smaller wire representation, producing binary elements that misdeclare their type or length. An unauthenticated party able to supply text parsed by an affected application can cause it to emit and persist malformed binary data, which subsequent readers either reject with an error or silently interpret as shorter than the data that was validated. |
| Incorrect boundary conditions in the SVG component. This vulnerability was fixed in Firefox 158.0.1 and Thunderbird 158.0.1. |
| libssh2 1.11.1, fixed in commit 97acf3d, contains an out-of-bounds write vulnerability in ssh2_transport_read() that fails to enforce upper bounds on packet_length field. Remote attackers can send crafted SSH packets with excessively large packet_length values to corrupt heap memory and achieve remote code execution. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20236 are related to issues concerning incorrect calculation that are grouped under the Common Weakness Enumeration (CWE) Base CWE-682. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| Vyper 0.3.4 through 0.5.0b1 computes the remaining blueprint size in create_from_blueprint by uint256 subtraction without first checking that code_offset is below the blueprint's code size, so a huge offset wraps to a small positive value. An attacker controlling code_offset can make a factory deploy contracts with no runtime code, potentially trapping ETH and tokens. |
